一种主链含非线性光学活性基团聚合物的合成

把非线性光学(NLO)发色基团引入到聚合物主链中,既可以增大聚合物中NLO基团的含量,从而提高聚合物的宏观NLO系数,又能够提高NLO聚合物的极化稳定性。本文报道一种由酚酞环氧树脂(PPh)与对硝基苯胺(NA)得到的NLO聚合物的合成及其极化松弛。 所用酚酞环氧树脂系自制,环氧值0.427。对硝基苯胺北京化工厂产,分析纯。N,N-二甲基甲酰胺为中国医药公司售品,化学纯,用前减压蒸馏精制,乙醇、丙酮均为北京化工厂生产,分析纯。在氮气保护下将等当量的PPh与NA溶于DMF中于150℃反应6～8小时后,倒     

一种模拟沸石分子筛扩散反应的Monte Carlo方法

在考虑了沸石分子筛中吸附、脱附、扩散和反应的特点的基础上，发展了一种模拟沸石分子筛中扩菜反应的ＭｏｎｔｅＣａｒｌｏ方法。用Ｌａｎｇｍｕｉｒ吸附等温式验证了该方法的合理性，并证明了轰击频率λ代表了反应物气相压力，而吸附、脱附几率之比即为吸附平衡常数。同时，通过改变轰击频率λ和反应几率Ｐｔ，得到了吸附等温线和有效因子随Ｔｈｉｅｌｅ模数变化的曲线。     

Enantioseparation of Novel Chiral Tetrahedral Clusters on a Chiral Stationary Phase (CSP) by High Performance Liquid Chromatography

In recent years, the synthesis of chiral tetrahedral clusters has been studied extensively and various types are accessible , which are a kind of organometallic compounds with greatly growing interest due to their potential application to asymmetric reaction catalysts. As an efficient     

Electrochemical behavior of poly(ferrocenyldimethylsilane-b-dimethylsiloxane) films

The electrochemical behavior of poly(ferrocenyldimethylsilane-b-dimethylsiloxane) (PFDMS-b-PDMS) films deposited on a glassy carbon electrode was investigated by means of cyclic voltammetry (CV). The influences of the solvent, film thickness, temperature, and PDMS block length in PFDMS-b-PDMS on the electrode process were discussed. It was found that in 0.1 M aqueous LiClO(4) the electrochemical processes of the films on a glassy carbon electrode were complex and have a low rate of electron transport and mass diffusion. The kinetic parameters obtained indicated that the electrode process was controlled by both the electrode reaction and mass diffusion.     

1-(α-萘乙酰基)-4-芳酰基氨基硫脲及3-(α-萘亚甲基)-4-芳酰基-1,2,4-三唑琳-5-硫酮的合成

许多酰氨基硫脲类衍生物有抗病毒、抗细菌、抗肿瘤等功效,我们曾经通过5-(α-萘)-2H-四唑-2-乙酰肼与芳酰异硫氰酸酯缩合得一系列新的酰氨基硫脲和相关的杂环衍生物,观察到它们在很低的浓度下就有调节小麦芽鞘生长的功能。Kothari等用α-萘乙酰肼与芳基异硫氰酸酯缩和制得一系列1-(α-萘乙酰基)-4-芳基氨基硫脲及     

Pd-Rh型国Ⅲ排放三效催化剂的研制

对满足欧Ⅲ排放限值的Pd-Rh型三效催化剂进行研究开发,测试了新鲜催化剂的空燃比特性和起燃温度特性,并与市场上的欧Ⅲ催化剂在同等条件下老化后的性能进行了比较.对研制的催化剂进行封装总成后,按照GB18352.3-2005标准进行了常温冷起动Ⅰ型和低温冷起动IV型试验,测试结果完全能满足该标准的限值要求.     

Propane oxidation over Pd/LaFe0.8Co0.2O3 catalyst

Pd/LaFe_0.8Co_0.2O₃ was found to be more active than the Pd/Al₂O₃ catalyst in propane oxidation. Activity and the oxidation state of palladium were strongly affected by the redox ratio (S) of reactants. Higher propane conversion could be obtained under rich conditions at higher temperatures, contributing to steam reforming. The presence of excess steam would bring about inhibition and oscillation.     

酯化交联聚乙烯醇膜用于渗透气化法分离EtoH／H2O的研究

合成了一系列磷酸和二元羧酸酯化交联改性的聚乙烯醇(PVA)膜,研究了它们用于水-乙醇混合液的渗透气化分离规律。磷酸改性的PVA膜具有较大的通量,当料液浓度为50%时,通量可达1200g/m~2·hr.,分离系数α_(H_2O/EtOH)=10。丙二酸改性PVA膜在料液浓度为50%时,通量可达800g/m~2·hr.,且α_(H_2O/EtOH)=18。并作了这两种膜的通量和分离系数随料液浓度的变化曲线。草酸交联的PVA膜具有较高的分离系数,但通量很小。求出了水、乙醇及总的表现渗透活化能。     

Study of the Complexation Behavior of Calixarene with Transition Metal Cations by UV—vis and Fluorescent Spectra

A new fluorescent compound based on calix[4] arene skeleton was synthesized.Its complexation ability with transition metal ions,such as Fe^3 ,Co^2 ,Ni^2 ,Cu^2 ,Zn^2 and Ag^ ,Was investigated by UV-vis and fluorescent spectra.     

Enhanced electrodeposition of indium hexacyanoferrate thin films through improved plating solution stability

An ordinary plating solution for indium hexacyanoferrate (InHCF) thin film deposition, mainly composed of equal concentrations of In³⁺ and [Fe(CN)₆]^3–, usually forms precipitates rapidly when either concentration is higher than few millimolar. This contributes to the plating solution's instability. Moreover, electrodeposited capacities are limited accordingly. In this work, the plating solution's stability and the electrodeposition of InHCF were greatly enhanced by adding a large amount of K⁺ and/or H⁺. It was found that a 10-mM plating solution added with 1 M HCl and 1 M KCl could be stored as fresh over a one-week period, whereas an unmodified plating solution became useless within a couple of minutes. Also, such cationic additions, especially adding H⁺, increased the electrodeposited capacity ca. 18 times at least, as compared with that obtained from the unmodified plating solution. Furthermore, related enhancing mechanisms were proposed and verified. To sum up, this study offers a means for better InHCF electrodeposition and should promote the applications of InHCF films. Electronic Publication