高效液相色谱-电感耦合等离子体质谱联用测定生物样品中无机汞和甲基汞

建立了高效液相色谱(HPLC)和电感耦合等离子体质谱(ICP-MS)联用测定多种生物样品中的无机汞和甲基汞的方法,并对比了提取生物样品中无机汞和甲基汞的不同前处理方法。实验使用5 mol/L的盐酸超声波提取样品中的无机汞和甲基汞。高效液相色谱流动相为含有0.06 mol/L醋酸氨,20μg/L B i,0.1%(V/V)2-巯基乙醇的5%(V/V)甲醇-水溶液,色谱柱为C18反相柱(5μm,3.9 mm×150 mm)。提取液在液相色谱中分离后,进入电感耦合等离子体质谱检测其中无机汞和甲基汞的浓度。测定了人发(GBW 07601),对虾(GBW 08572),鱼肉组织(IAEA MA-B-3/TM)和牛肝(GBW 080193)4种生物标准参考物,结果与标准参考物的标准值相符。无机汞和甲基汞检出限分别为0.3和0.2μg/L。     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

Determination of berberine in Rhizoma coptidis and its preparations by non-aqueous capillary electrophoresis

A non-aqueous capillary electrophoretic method was established for the determination of berberine in Rhizoma coptidis and its preparations. The effects of organic solvent and the concentrations of sodium acetate were studied, which showed that berberine in extracts of traditional Chinese medicine can be separated successfully in a buffer solution of 75 mmol/L of sodium acetate in methanol containing 1 mol/L of acetic acid. The simple and rapid method was linear in the range 25-200 microgram/mL of berberine and had a good reproducibility, with the relative standard deviation below 2%. Non-aqueous capillary electrophoresis is a satisfactory system for the analysis of alkaloids in traditional Chinese medicine.     

Crystal Structures of Cs+-Crown Ether Complexes Containing Polynuclear Mercury Iodide Anions

Reactions of CsI and HgI₂ with benzo-15-crown-5 (B15C5) and 15-crown-5 (15C5) in an ethanol-acetone mixture produced [Cs(B15C5)₂]₂[Hg₂I₆] (1) and {[Cs(15C5)]₂[Hg₂I₆]}_n (2), respectively. The structures of the two complexes are quite different. Molar ratios of Cs⁺ : crown ether are 1 : 2 in 1 and 1 : 1 in 2. Complex 1 consists of two Cs(B15C5) ₂ ⁺ cations and a Hg₂I ₆ ^2- anion. Cs⁺ lies between the two crown-5 ligands, resulting in a sandwich-type cation. Cationic Cs(B15C5) ₂ ⁺ and anionic Hg₂I ₆ ^2- are linked together by electrostatic interactions and the complex 1 is an ion pair compound. Complex 2 consists of infinite [Cs(15C5)]₂[Hg₂I₆] units. Each structural unit contains two Cs(15C5)⁺ cations and a Hg₂I ₆ ^2- anion. Cs⁺ is coordinated by five oxygen atoms of 15C5, three iodine atoms of Hg₂I ₆ ^2- , and an iodine atom of Hg₂I ₆ ^2- in an adjacent structural unit. The interactions between the Cs⁺ of Cs(15C5)⁺ and an I^– in Hg₂I ₆ ^2- from adjacent structural units polymerize the complex 2, resulting in a one-dimensional network structure. The anions of Hg₂I ₆ ^2- in both complexes are similar. The two mercury atoms are linked through two bridging iodine atoms and each mercury is also coordinated by two terminal iodines. Crystal data for 1: space group P2₁/c (No. 14), a = 12.253(4), b = 20.945(7), c = 16.110(6) Å, = 111.0(1)°, V = 3860 ų, Z = 4, R = 0.082 (R _w = 0.089). Crystal data for 2: space group P2₁/c (No. 14), a = 12.157(4), b = 8.546(4), c = 20.666(6) Å, = 91.54(3)°, V = 2146 ų, Z = 4, R = 0.034 (R _w = 0.048).     

A new MnxOy/carbon nanorods derived from bimetallic Zn/Mn metal–organic framework as an efficient oxygen reduction reaction electrocatalyst for alkaline Zn-Air batteries

Journal of Solid State Electrochemistry - In this work, nanorods like bimetallic Zn/Mn metal–organic-frameworks (MOFs) are proposed as the precursor for preparing MnxOy/porous carbon...     

The Coordination Chemistry of f-Block Elements in Molten Salts

The coordination chemistry of f-block elements (lanthanide and actinide) in molten salts has become a resounding topic in view of its great importance to the research and development (R&D) of molten salt reactors and pyroprocessing. In this Review article, a general overview of the coordination chemistry of f-block elements in molten salts is provided including past achievements and recent advances. Particular emphases are placed on the oxidation state, speciation, and solution structure of f-block metal ions in molten salts, as well as their relationships with the salt composition. Furthermore, this review briefly discusses the spectroscopic and theoretical methods that complement each other in revealing the coordination properties.     

Direct synthesis of hyperbranched ethene oligomers and ethene-MA co-oligomers using iminopyridyl systems with weak neighboring group interactions

The synthesis of hyper-branched ethene oligomers through catalytic insertion reactions with late transition metal catalysts is unique in its synthetic and practical scope. In this study, a series of iminopyridyl Ni(II) and Pd(II) complexes with electron-rich distal aryl motifs were synthesized and characterized. These complexes were very efficient in ethene oligomerization and co-oligomerization with methyl acrylate (MA). Hyperbranched ethene oligomers with different microstructures were generated using different metal species in ethene oligomerization. More importantly, hyperbranched ethene-MA co-oligomers with varying incorporation ratios were generated via ethene and MA co-oligomerization using the Pd(II) complexes. Most notably, weak neighboring group interactions of distal aryl motifs in the nickel system are more effective in influencing the microstructure of ethene oligomers than the corresponding palladium system.     

Simultaneous Determination of Seven Lipophilic and Hydrophilic Components in Salvia miltiorrhiza Bunge by LC-MS/MS Method and Its Application to a Transport Study in a Blood-Brain-Barrier Cell Model

Salvia miltiorrhiza Bunge (SM) has been extensively used in Alzheimer’s disease treatment, the permeability through the blood-brain barrier (BBB) determining its efficacy. However, the transport mechanism of SM components across the BBB remains to be clarified. A simple, precise, and sensitive method using LC-MS/MS was developed for simultaneous quantification of tanshinone I (TS I), dihydrotanshinone I (DTS I), tanshinone IIA (TS IIA), cryptotanshinone (CTS), protocatechuic aldehyde (PAL), protocatechuic acid (PCTA), and caffeic acid (CFA) in transport samples. The analytes were separated on a C18 column by gradient elution. Multiple reaction monitoring mode via electrospray ionization source was used to quantify the analytes in positive mode for TS I, DTS I, TS IIA, CTS, and negative mode for PAL, PCTA, and CFA. The linearity ranges were 0.1–8 ng/mL for TS I and DTS I, 0.2–8 ng/mL for TS IIA, 1–80 ng/mL for CTS, 20–800 ng/mL for PAL and CFA, and 10–4000 ng/mL for PCTA. The developed method was accurate and precise for the compounds. The relative matrix effect was less than 15%, and the analytes were stable for analysis. The established method was successfully applied for transport experiments on a BBB cell model to evaluate the apparent permeability of the seven components.     

Structure of friction-transferred highly oriented poly(3-hexylthiophene) thin films

Oriented thin films of P3HT were obtained by a friction-transfer technique. The morphology and structure of the film were studied by means of optical microscopy, atomic force microscopy and transmission electron microscopy. Optical microscopy observation indicates that large size well-ordered P3HT thin films can be produced by a friction-transfer technique. Highly ordered lamellae were observed in P3HT friction-transferred films by electron microscopy. Electron diffraction results confirm the existence of high orientation with the a- and c-axes of P3HT crystals aligned in the film plane while the c-axis parallel to the friction-transfer direction. The atomic force microscopy observation of the as-prepared P3HT thin film shows, however, a featureless top surface morphology, indicating the structure inhomogeneity of the obtained film. To get highly oriented P3HT thin films with homogenous structure, high temperature annealing, solvent vapor annealing and self-seeding recrystallization of the friction-transferred film were performed. It is confirmed that solvent vapor annealing and self-seeding recrystallization methods are efficient in improving the surface morphology and structure of the frictiontransferred P3HT thin film. Highly oriented P3HT films with unique structure can be obtained through friction-transfer with subsequent solvent vapor annealing and self-seeding recrystallization.     

基于双氨基三唑硫醚为中性载体的汞离子选择性电极的研究

研制了基于双氨基三唑硫醚为中性载体的阳离子选择性电极。实验表明,该电极对Hg2 具有良好的电位响应特性,在pH 2.0硝酸盐缓冲液中,电极电位呈近能斯特响应,线性响应范围为4.0 mg/L~20 g/L,斜率为33.4 mV/dec.(25℃),检出限为1.7 mg/L。该电极响应时间短(<10 s),pH范围较宽(1.3~3.3)。将该电极用于实际水样和二元混合溶液中Hg2 的检测,其结果令人满意。