蜂蜜中多种有机磷农药残留的液相色谱串联质谱检测

针对敌百虫、敌敌畏和蝇毒磷为常用的防治蜜蜂天敌或虫害的有机磷农药杀虫剂,易在蜂蜜中产生残留,建立了蜂蜜中敌百虫、敌敌畏和蝇毒磷残留的液相色谱串联质谱(LC-MS/MS)同时测定方法。蜂蜜样品经乙酸乙酯提取、浓缩,用甲醇溶解残渣,液相色谱(LC)分离,电喷雾(ESI)-MS/MS多反应监测(MRM)模式检测,外标基体曲线定量。3种有机磷农药在20～500μg/L范围内线性响应良好,相关系数均大于0.994;获得的检出限均为0.1μg/kg,定量限均为4μg/kg。在加标浓度为10～40μg/kg范围内,平均回收率为78.5%～96.8%,相对标准偏差为9.1%～13.1%。     

退火温度对ZnO薄膜晶体管电特性的影响

针对非晶硅和有机薄膜晶体管的低迁移率问题,以高纯Zn为靶材,反应磁控溅射沉积、且在不同温度下退火的ZnO薄膜作为半导体活性层,成功地制备出基于ZnO材料的薄膜晶体管(ZnO-TFT),研究了退火温度对ZnO -TFT电特性的影响.结果表明:ZnO- TFT的载流子迁移率随退火温度的升高而明显增大,700℃退火的样品迁移...     

基于16S rRNA和16S-23S rRNA基因间隔区序列探讨陆生和水生螺原体菌株的系统发生关系

采集江苏省养殖池塘内发病的中华绒螯蟹、克氏原螯虾和南美白对虾,利用已有螺原体16S rRNA和23S rRNA基因序列保守引物扩增并测序16S rRNA和16S-23S rRNA基因间隔区序列(ISRs).基于已获得的序列和GenBank中下载的螺原体序列分别进行同源性比对,比对的结果分别利用PAUP软件和MrBaye...     

Photonic integrated technology for multi-wavelength laser emission

We summarized the design, fabrication challenges and important technologies for multi-wavelength laser transmitting photonic integration. Technologies discussed include multi-wavelength laser arrays, monolithic integration and modularizing coupling and packaging. Fabrication technique requirements have significantly declined with the rise of reconstruction-equivalent-chirp and second nanoimprint mask technologies. The monolithic integration problem between active and passive waveguides can be overcome with Butt-joint and InP array waveguide grating technologies. The dynamic characteristics of multi-factors will be simultaneously measured with multi-port analyzing modules. The performance of photonic integration chips is significantly improved with the autoecious factors compensation packaging technique.     

Premixed jet flame characteristics of syngas using OH planar laser induced fluorescence

Lean premixed flame characteristics of several typical low calorific value (LCV) syngases (basis CO/H2/CH4/CO2/N2),including bituminous coal,wood residue,corn core,and wheat straw gasification syngas,were investigated using OH planar laser induced fluorescence (PLIF) technology.OH radical distributions within the turbulent flame were measured for different turbulence intensities.Flame structures of syngases were analyzed and characterized with respect to burnt and unburnt regions,flame curvature (sharp cusp),local extinction (holes and penetration),OH reaction layer thickness,wrinkling,and other features,with OH-PLIF instantaneous images and statistical analysis.Results show that H2 content,LCV,and turbulence intensity are the most effective factors influencing the OH radical intensity and thickness of OH radical layers.The bituminous coal gasification syngas with relatively higher LCV and H2 content tends to burn out easily.Through changes in thickness of the OH radical layers and signal intensities,the reaction layer can be compressed by intensifying turbulence and thereby the combustion processes of syngas.     

Molybdenum isotopic composition as a tracer for low-medium temperature hydrothermal ore-forming systems: A case study on the Dajiangping pyrite deposit,western Guangdong Province,China

Little is known about the range or controls on the molybdenum isotopic composition of low-medium temperature hydrothermal ore-forming systems. We present molybdenum isotope data from 12 hydrothermal syndepositional silicalite and carbonaceous slate samples from the Dajiangping pyrite deposit in western Guangdong Province, South China. The δ ^97/95 Mo values from Orebody III range from −0.02‰ to 0.29‰, with an average of 0.18‰. In contrast, the composition values from Orebody IV display a larger variation from −0.70‰ to 0.62‰. However, the five samples from the main ore bed all show strong negative values. This indicates that the significant variation in molybdenum isotopic composition supports different hydrothermal ore-forming metallogenesis and a metallogenic environment between the two orebodies. Orebody III is likely to have been deposited from submarine exhalative hydrothermal fluids under a relatively strong reducing environment and Orebody IV may have also been influenced by hydrothermal superimposition in a more oxidized disequilibrium condition. In addition, the δ ^97/95 Mo values of Orebody IV are clearly negative, together with the values increasing stratigraphically upward in the ore beds, suggesting that the metallogenic environment of Orebody IV is different from the open oceanic systems. There might be dynamic fractionation in this restricted environment. Therefore, the molybdenum isotope can be used as an effective tracer for the ore-forming fluid and metallogenic environment.     

噻吩二胺基三嗪衍生物的合成及其与全氟链苯甲酸形成的复合物的液晶行为研究

 以Kumada偶联反应为关键步骤首次合成了未见文献报道的2,4-二胺基-6-(4,5-二癸基噻吩)-1,3,5-三嗪 (T),并制备了在多重氢键作用下T与全氟链苯甲酸(A)形成的超分子液晶复合物.红外光谱(IR)与偏光显微镜(POM)研究表明T与A形成的等摩尔复合物可呈现液晶柱相,其原因可能是T与A通过氢键形成的二聚超分子的中心极性区域由于氢键的存在其极性得到加强,以及全氟链的引入提高了分子内的极性对比,利于微观相分离及分子进行有序自组装.     

小鼠睾丸发育全过程中生精细胞的自发性凋亡

 以17组出生后不同发育阶段的昆明种正常小鼠睾丸组织为材料,采用TDT原位末端标记法在其石蜡组织切片上进行凋亡细胞原位检测,探讨小鼠睾丸发育全过程中生精细胞的自发性凋亡规律.结果发现:小鼠生精细胞从生后开始就存在自发性凋亡现象,生后1~15 d,凋亡精原细胞数目不断增加;至生后第15天时达到峰值,且15 d起个别初级精母细胞也开始出现凋亡;至27 d时,极少数次级精母细胞和精子细胞出现凋亡;至30 d时凋亡细胞基本为精原细胞;而33 d时各类型生精细胞均存在凋亡现象;至36 d时凋亡细胞又重新集中于精原细胞,并延续于此后各期.上述结果表明:小鼠睾丸发育过程中凋亡细胞主要为精原细胞;自发性凋亡活跃期发生于生后1~33 d,与生精细胞的首次发育成熟过程同步.     

PuO3分子激发态的外场效应

 采用密度泛函(DFT)方法B3LYP/Gen,在Pu为相对论有效原子实势(RECP)基组、O为6-311+G*基组水平上优化得到了分子轴方向不同电偶极场（0.005～0.005a.u）作用下,PuO3的基态电子状态为C 2v(7B-2)。在优化构型下用同样的基组采用含时密度泛函(TDDFT)方法(TD-B3LYP)研究了同样外电场条件下对PuO3的激发能和振子强度的影响。计算结果表明,激发能随电场强度增加而减小,表明在外电场作用下电子容易激发,且对电场方向的依赖呈现近似对称性,满足Grozema关系。PuO3的前5个激发态电子跃迁光谱波长为900.2～2063.3 nm,属于红外、远红外光谱,这是钚原子的奇异特征。电场对振子强度的影响仍满足跃迁选择定则。     

基于刚度及经济的CFRP与钢组合拉索设计理论

基于钢斜拉索、碳纤维增强塑料(CFRP)斜拉索适用跨径研究结果,针对1 400~2 800 m主跨斜拉桥整体刚度不足提出一种新型结构方案,即基于刚度及经济性能的CFRP与钢组合拉索方案.该方案将CFRP斜拉索与传统钢斜拉索同时应用于斜拉桥中,将２种材料高强轻质及弹性模量高的优点进行组合,以充分提高斜拉索的等效刚度,进而提高斜拉桥的整体刚度.详细介绍该组合方案设计思路与方法,通过比较等效刚度以及经济性能给出２种材料斜拉索推荐组合比例.最后,通过一座1 400 m主跨CFRP与钢组合拉索斜拉桥试设计说明该方案相对传统方案整体刚度上的优势,证明其工程应用的可行性,是主跨为1 400~2 800 m斜拉桥的优选方案之一.