A rapid and accurate 3-(4,5-dimethyl thiazol-2-yl)-2,5-diphenyl tetrazolium bromide colorimetric assay for quantification of bacteriocins with nisin as an example

The objective of this study is to propose a more accurate and faster MTT [3-(4,5-dimethyl thiazol-2-yl)-2,5-diphenyl tetrazolium bromide] colorimetric assay (MCA) for quantitative measurement of polypeptide bacteriocins in solutions with nisin as an example. After an initial incubation of nisin and indicator bacterium Micrococcus luteus NCIB 8166 in tubes, MTT was added for another incubation period. After that, nisin was quantified by estimating the number of viable bacteria based on measuring the amount of purple formazan produced by cleavage of yellow tetrazolium salt MTT. Then MCA was compared to a standard agar diffusion assay (ADA). The results suggested a high correlation coefficient (r ²=0.975±0.004) between optical density (OD) and the inhibitory effect of nisin on a bacterial strain Micrococcus luteus NCIB 8166 at a range of 0.125~32 IU/ml. The MCA described in this study was very quick. Quantification of nisin took only 7~8 h and the detection limit was at the level of 0.125 IU/ml when compared to 12 IU/ml and 24~28 h for ADA. The MCA provides an accurate and rapid method for quantification of nisin in solutions and is expected to be used for quantification of other antimicrobial substances.     

Synthesis, morphology and random laser action of ZnO nanostructures

Three-dimensional (3-D) ZnO random-wall nanostructures and one-dimensional (1-D) ZnO nanorods were prepared on silicon substrates by a simple solid-vapour phase thermal sublimation technique. Optical pumped random lasing has been observed in the ZnO random-wall arrays with a threshold intensity of 0.38 MW/cm² in the emission wavelength from 380 to 395 nm. The optical gain was attributed to the closed-loop scattering and light amplification of the ZnO random-wall. The experimental result suggests that the morphology of nanostructure is the key factor to effect random lasing.     

Clustering study in Eu(DBM)3Phen-doped polymer optical fibers by optical properties and near-field scanning microscopy

The clusters of Eu3+ ion in Eu(DBM)3Phen-doped polymethyl methacrylate (PMMA) have been studied by three means. The relative fluorescence intensity ratio of the 5D0 → 7F2 to 5D0 → 7F1 transitions with different concentrations of Eu3+ in Eu(DBM)3Phen-doped PMMA and metastable-state (5D0) lifetime dependence on Eu3+ concentration are analyzed. The analysis indicates that there are no clustering effects in Eu3+ ions of Eu(DBM)3Phen-doped PMMA when the Eu3+ doping concentration is up to 1.0 wt.-%. At the same time, the clustering effect has not been observed by the scanning near-field optical microscopy (SNOM) in Eu(DBM)3Phen-doped PMMA with 1.0 wt.-% of Eu3+ ions. The analysis reveals that a high concentration of Eu3+ can be incorporated into polymer optical fiber (POF) without clustering effect.OCIS codes: 180.5810, 300.6280, 250.5460, 160.5690.     

生活中的物理知识

日常生活中有许多家用电器与我们学习的知识有着密切关系，可是当学生遇到此类问题时，就不能正确解答因此在教学中应注意，利用生活中的实物分析物理问题会收到良好的效果。     

An algorithm for three-way data analysis that alternatively minimizes coupled vector (COV) resolution error and PARAFAC error.

A novel algorithm, alternatively minimizing coupled vector (COV) resolution error and PARAFAC error algorithm, is proposed in this paper. This algorithm can overcome the problem of slow convergence and is insensitive to the estimation of component number, such problems are unavoidable while using the traditional parallel factors analysis (PARAFAC) algorithm. In other words, this algorithm is capable of improving the computing speed and providing accurate resolutions provided that the number of factors used in the computation is no less than that of the actual underlying ones. The characteristic performances were demonstrated with a novel fluorescence data array.     

The structure of multi-electrode-pair pulse laser and discharge pulse time selection

Applying multi-electrode-pair pulse TEA CO₂ laser to one optical resonance cavity will have several advantages over traditional method, including higher gain, shorter pulse discharge time interval, and in particular, continuous adjustable time interval of multi-pulse laser output can be achieved without high vacuum condition. To improve laser's working stabilization, we proposed new approaches to optimize laser structure design and discharge pulse time interval selection.     

一种新颖的超结构光纤Bragg光栅梳状滤波器的设计

报道一种新颖的用于多波长光纤激光器的超结构光纤Bragg光栅（SFBG）梳状滤波器，其突出特点是仅由单个光栅构成、折射率调制和局部啁啾富于变化、反射峰均匀性好、窄带宽和标准的信道间隔.采用基于LP算法的IS光纤光栅设计技术，将整体加窗切趾法改进为各信道独立加窗切趾，成功地设计出所需的SFBG，同时对SFBG的制作技术也进行了探讨.用传输矩阵法分析反射谱、时延曲线和群时延抖动.结果表明，所设计的SFBG满足各项设计指标要求，在DWDM系统中，这种新颖的SFBG可望成为用于多波长光纤激光器的最理想的高性 能梳 关键词： 超结构光纤Bragg光栅 光栅设计 梳状滤波器     

HACCP在石油行业野外施工食堂中应用的绩效分析

将HACCP这一世界公认的食品安全控制系统引入野外施工食堂卫生管理当中.方法采用文献检索,事故分析、现场调查和Delphi等研究方法,通过对野外施工食源性疾病危害分析、建立关键控制点,形成野外施工食堂管理HACCP管理规范,并组织实施.结果实施HACCP体系后,从业人员手、餐具、菜墩、抹布的抽查合格率有显著提高,食堂从业人员以及参加施工人员对饮食卫生以及食堂卫生管理知识的掌握显著提高.结论在野外施工食品卫生管理中引入HACCP管理体系,控制食源性疾病取得了良好的绩效.     

A Digital Right Management Model for Distribution of Digital Audiovisual Content

0 IntroductionDue to the success of Internet technology and the emer-gence of wide band network,downloading encoded dig-ital audiovisual content files via HTTP,FTP,etc ,had gainedfavor amongInternet users because of thei mmediate access todesired content . Digital Right Management (DRM) system,can satisfy the content provider by encrypting digital audiovi-sual content andli miting access to onlythose people who haveacquired a proper license to play backthe content[1].DRMas defined bythe …