工业原料铁制备浆态床FT合成用的Fe-Cu-K-Si催化剂的探索

费托合成技术是公认的将煤基合成气转化为液体燃料和化工原料的重要技术途径。虽然固定床费托合成技术从五十年代起已经工业运转，但是浆态床费托合成技术由于其传热性能好，可直接使用第二代气化炉生产的富CO合成气，反应器结构简单，单台反应器生产能力大，开工率高，产品结构合理，     

共沉淀CuO-ZrO2复合氧化物分散态结构研究

用XRD、EXAFS、XPS表征了共沉淀法制备的CuO-ZrO2复合氧化物的分散态结构. 500 ℃焙烧的样品在一定组成范围内形成大体均匀的无定形态固溶体. CuO含量超过其在ZrO2中溶解度时，多余的CuO以CuO晶体形式存在；当ZrO2含量超过其在CuO中溶解度时，多余的ZrO2以四方相ZrO2晶体形式存在.焙烧温度达到800 ℃时，样品由单斜相ZrO2和CuO晶体组成.     

Determination of Organophosphorus Pesticides in Soil by MMSPD-GC-NPD and Confirmation by GC-MS

A novel method, modified matrix solid-phase dispersion (MMSPD), has been developed for quantitative analysis of organophosphorus pesticide residues in soil. It was based on matrix solid-phase dispersion (MSPD) and continuous liquid-solid extraction (continuous LSE), using Florisil as sorbent and dichloromethane as the recycling solvent. Two soils with different texture and physicochemical properties were studied to validate the method. The effect of residence time of pesticides in soil was also studied. MMSPD was compared with MSPD and continuous LSE respectively. Determination was carried out by gas chromatography with nitrogen-phosphorus detection (GC-NPD). The method gave recoveries ranging from 72–105% with relative standard deviations (RSDs) lower than 15% for the pesticides studied. The limits of detection (LODs) ranged from 0.1 to 0.6 ng g⁻¹. Two pesticide residues have been detected in real soil samples from Fujian, China, using MMSPD. The pesticides were confirmed by gas chromatography-mass spectrometry (GC-MS) in a selected-ion monitoring (SIM) mode. Revised: 4 and 9 April 2006     

Phase separation in the formation of hollow particles by suspension polymerization for divinylbenzene/toluene droplets dissolving polystyrene

Phase-separation behavior within polymerizing divinylbenzene/toluene droplet dissolving polystyrenes (PS) was investigated to clarify the formation mechanism of the hollow polymer particles by suspension polymerization. No hollow particles were obtained at a low content of low-molecular-weight PS where phase separation occurred at high conversion. On the other hand, hollow particles were obtained at a high content of high-molecular-weight PS where phase separation occurred at low conversion. The phase separation in an early stage of the polymerization, which was promoted by the presence of PS and cross-links of polydivinylbenzene, was a key factor for the formation of the hollow structure.     

高温超导体制备条件的人工神经网络识别

高温超导体的制备条件要求严格,其掺杂量大小、烧结温度控制等都直接影响实验样本的超导性质。近几年高温超导研究已积累大量实验数据,如何应用人工智能方法处理这些数据寻找更好的合成条件颇有意义。人工神经网络方法在许多领域己显示其处理复杂数据和模式识别的优越性,但尚未应用到化合物制备研究方面。本文对此作了初步尝试。     

Ab initio study of the electronic spectrum of dichlorocarbene CCl2

The equilibrium geometries, excitation energies, force constants and vibrational frequencies for seven low-lying electronic states X ¹A₁, ¹B₁, ³B₁, ¹A₂, ³A₂, ¹B₂ and ³B₂ of dichlorocarbene CCl₂ have been calculated at the MRSDCI level with a double-zeta plus polarization basis set. Our calculated equilibrium geometry for the X ¹A₁ state, excitation energy for X ¹A₁ → ¹B₁ and vibrational frequencies for the X ¹A₁ and ¹B₁ states are in good agreement with experimental data. The electronic transition dipole moments, oscillator strengths for the ¹B₁ → X ¹A₁ and ¹B₂ → X ¹A₁ transitions, radiative lifetimes for the ¹B₁ and ¹B₁ states are calculated using MRSDCI wavefunctions, predicting results in reasonable agreement with experiment.     

丙烯选择氧化铋钼铁复氧化物催化剂组成,结构及性能的研究

采用XRD、Raman、XPS及催化剂性能评价等手段,考察了Bi_3(FeO_4)(MoO_4)_2和Fe_2(MoO_4)_3分别存在及两者共存时对Bi-Mo复氧化物体系催化性能的影响.结果表明,这两种含Fe物种的存在都有助于改善Bi-Mo系复氧化物催化剂对丙烯选择氧化反应的催化性能.但两者在作用机理上有所不同.Fe_2(MoO_4)_3本身无催化活性,但在反应条件下可部分还原为FeMoO_4形成Fe~(3+)/Fe~(2+)氧化还原对;且其地结构上与α-Bi_2(MoO_4)_3相匹配,这些因素都有助于促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生,从而提高催化性能.Bi_3(FeO_4)(MoO_4)_2在反应条件下也可形成Fe~(3+)/Fe~(2+)氧化还原对,但由于其Fe~(3-)所处的化学环境与Fe_2(MoO_4)_3很不相同,且Fe的含量也不及Fe_2(MoO_4)_3,因此它在促进催化体系中电子和氧物种的传递及催化剂表面活性中心的再生等方面的性能较差,但它对提高催化剂表面的活性中心(Bi-Mo对)数目有贡献.     

Synthesis and Investigation of Indium Dodecatungstosilicate

Indium dodecatungstosilicate of the composition [In(OH)⋅5H₂O]₂ [SiW₁₂O₄₀]⋅H₂O is synthesized and studied by means of IR spectroscopy, thermogravimetry, and X-ray phase analysis. The crystals of this compound are triclinic, space group P1, a 13.079(3), b 13.795(3), c 13.967(3) Å, α 90.08(3)°, β 103.76(3)°, ψ107.76(3)°, Z 2, and π_calc 4.900 g cm⁻³.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 1, 2005, pp. 21–23.Original Russian Text Copyright © 2005 by Kaziev, Dutov, Quinones, Ita, Sychkin.     

铜(Ⅱ)-2,2′-联吡啶-铬天菁S三元络合物极谱吸附波及应用

本文提出了一个灵敏的具有选择性的溶出伏安法测超痕量铜的方法。在0.01mol／LNH3·H2O-NH4Cl溶液中（pH＝9．3），铜（Ⅱ）－2，2′-联吡啶（Dipy）-铬天菁S（CAS）能生成具吸附性的电活性三元络合物，在＋0.1V（vs．SCE）电位下富集，阴极溶出峰电位是一0．18V，峰电流与Cu（Ⅱ）的浓度在9．0×10－9～7.0×10－7mol／L范围内成正比，检测限是3．0×10－9mol／L，这一方法已用于测定环境水中痕量铜，回收率在98．5％，102．5％之间。     

A simulation of thermal characteristic parameters with an inverse “S” type curve

A synthetical equation is proposed to characterize the essential features of the inverse “S” type curve on the basis of summing-up simulation approach of “S” type curve. The two physical variables in the model obtained are discussed and the detailed method used to determine the parameters is given. The model is then presented to describe the crystallization of poly(caryleher ether ketone) (PEEK) and thermal decomposition of poly(amide-imide) (PAI) respectively. It is found that some thermal characteristic parameters can be well estimated from the model simu-lated in computer.