Finished-vehicle transporter routing problem solved by loading pattern discovery

This work addresses a new transportation problem in outbound logistics in the automobile industry: the finished-vehicle transporter routing problem (FVTRP). The FVTRP is a practical routing problem with loading constraints, and it assumes that dealers have deterministic demands for finished vehicles that have three-dimensional irregular shapes. The problem solution will identify optimal routes while satisfying demands. In terms of complex packing, finished vehicles are not directly loaded into the spaces of transporters; instead, loading patterns matching finished vehicles with transporters are identified first by mining successful loading records through virtual and manual loading test procedures, such that the packing problem is practically solved with the help of a procedure to discover loading patterns. This work proposes a mixed-integer linear programming (MILP) model for the FVTRP considering loading patterns. As a special class of routing models, the FVTRP is typically difficult to solve within a manageable computing time. Thus, an evolutionary algorithm is designed to solve the FVTRP. Comparisons of the proposed algorithm and a commercial MILP solver demonstrate that the proposed algorithm is more effective in solving medium- and large-scale problems. The proposed scheme for addressing the FVTRP is illustrated with an example and tested with benchmark instances that are derived from well-studied vehicle routing datasets.     

Numerical discretization-based kernel type estimation methods for ordinary differential equation models

We consider the problem of parameter estimation in both linear and nonlinear ordinary differential equation(ODE) models. Nonlinear ODE models are widely used in applications. But their analytic solutions are usually not available. Thus regular methods usually depend on repetitive use of numerical solutions which bring huge computational cost. We proposed a new two-stage approach which includes a smoothing method(kernel smoothing or local polynomial fitting) in the first stage, and a numerical discretization method(Eulers discretization method, the trapezoidal discretization method,or the Runge–Kutta discretization method) in the second stage. Through numerical simulations, we find the proposed method gains a proper balance between estimation accuracy and computational cost.Asymptotic properties are also presented, which show the consistency and asymptotic normality of estimators under some mild conditions. The proposed method is compared to existing methods in term of accuracy and computational cost. The simulation results show that the estimators with local linear smoothing in the first stage and trapezoidal discretization in the second stage have the lowest average relative errors. We apply the proposed method to HIV dynamics data to illustrate the practicability of the estimator.     

Highly unsaturated pyranone derivatives from the basidiomycete Junghuhnianitida

Four new highly unsaturated pyranone derivatives A–D (1–4), together with one known compound 5 (−)-nitidon were isolated from cultures of the fungus Junghuhnianitida. Planar structures of the new compounds were elucidated on the basis of extensive NMR spectroscopic and mass spectrometric analyses. Absolute configurations of the new compounds were determined on the basis of biosynthetic considerations and quantum chemistry theory. Compound 1 exhibited almost the same cytotoxic activities as cis-platin.     

A Low‐dimensional Viologen/Iodoargentate Hybrid [(BV)2­(Ag5I9)]n: Structure,Properties, and Theoretical Study

A new low‐dimensional benzyl viologen/iodoargentate hybrid, [(BV)₂(Ag₅I₉)]_n ( 1 ) (BV²⁺ = benzyl viologen) was prepared. In 1 , (Ag₆I₉)_n^2– chain exhibits a new type of one‐dimensional chain constructed from vertex‐sharing of Ag₅I₁₀ units, and its two‐dimensional layer structure was constructed from C–H ··· I hydrogen bonds. Strong luminescence at 404 nm can be detected in 1 . DFT calculation suggests that 1 displays a reduced bandgap, which is led by a more dispersed LUMO band of BV²⁺ compared with MV²⁺ in [MV(Ag₂I₄)]_n.     

Two Coordination Polymers Constructed from 5‐(4‐Pyridyl)‐1H‐tetrazole Ligands with Different Organic Carboxylates: Structure and Luminescence Properties

Two coordination polymers (CPs), namely, [Cu(Hptz)₂(Hhba)₂]_n ( 1 ) [Hptz = 5‐(4‐pyridyl)‐1H‐tetrazole, H₂hba = 2‐hydroxybenzoic acid] and [Zn₃(ptz)₂(hpa)₂]_n ( 2 ) (H2hpa = 2‐hydroxy‐2‐phenylacetic acid), were synthesized by solvothermal reactions. Both complexes were characterized by elemental analysis, infrared spectroscopy, powder X‐ray diffraction, thermogravimetric analysis, and single‐crystal X‐ray diffraction analysis. Compound 1 exhibits a 2D (4,4) network, where each layer connects to four adjacent layers to construct a 3D supramolecular framework. Compound 2 has a 3D framework structure composed of 1D SUBs, which are formed by both carboxyl and tetrazole groups. The complexes represent two rare examples of CPs constructed from Hptz and organic carboxyl acid ligands. Complex 2 exhibits intense, red‐shifted emissions in the visible region at room temperature.     

Characterization of size‐segregated aerosols using ToF‐SIMS imaging and depth profiling

Size‐segregated particles were collected with a ten‐stage micro‐orifice uniform deposit impactor from a busy walkway in a downtown area of Hong Kong. The surface chemical compositions of aerosol samples from each stage were analyzed using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) operated in the static mode. The ToF‐SIMS spectra of particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were compared, and the positive ion spectra from stage 2 to stage 10 were analyzed with principal component analysis (PCA). Both spectral analysis and PCA results show that the coarse‐mode particles were associated with inorganic ions, while the fine particles were associated with organic ions. PCA results further show that the particle surface compositions were size dependent. Particles from the same mode exhibited more similar surface features. Particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were further selected as representatives of the three modes, and the chemical compositions of these modes of particles were examined using ToF‐SIMS imaging and depth profiling. The results reveal a non‐uniform chemical distribution from the outer to the inner layer of the particles. The coarse‐mode particles were shown to contain inorganic salts beneath the organics surface. The accumulation‐mode particles contained sulfate, nitrate, ammonium salts, and silicate in the regions below a thick surface layer of organic species. The nucleation‐mode particles consisted mainly of soot particles with a surface coated with sulfate, hydrocarbons, and, possibly, fullerenic carbon. The study demonstrated the capability of ToF‐SIMS depth profiling and imaging in characterizing both the surface and the region beneath the surface of aerosol particles. It also revealed the complex heterogeneity of chemical composition in size and depth distributions of atmospheric particles. Copyright © 2014 John Wiley & Sons, Ltd.     

Novel cytotoxic nine-membered macrocyclic polysulfur cembranoid lactones from the soft coral Sinularia sp.

One novel nine-membered macrocyclic polysulfur cembranoid lactone, sinulariaoid A (1); three new multioxygenated cembranoids, sinulariaoid B (2), sinulariaoid C (3), sinulariaoid D (4); and four known cembranoids, capilloloid (5), dihydrosinularin (6), sinularin (7), and dihydrosinuflexolide (8) were isolated from the soft coral Sinularia sp. collected off of Sanya Bay in the South China Sea. Their stereochemical structures were determined on the basis of extensive spectroscopic methods, including single crystal X-ray diffraction analysis. Sinulariaoid A (1) is the first reported nine-membered macrocyclic polysulfur cembranoid from soft coral. The cytotoxic activities of compounds 1–8 were determined in four human cancer cell lines (HepG2, HepG2/ADM, MCF-7, and MCF-7/ADM). Of these, sinulariaoid A (1) exhibited the most potent anticancer activity in vitro, and its cytotoxicity in HepG2/ADM was more potent than in the other three cell lines. Furthermore, it was found that sinulariaoid A (1) induced apoptosis, and its selective toxicity toward HepG2/ADM cells was not related to P-glycoproteins.     

Substituent effects on the redox potentials of dihydroxybenzenes: theoretical and experimental study

The redox reactions of p-hydroquinone and pyrocatechol undergo a two-proton-two-electron process in aqueous solution. We calculated their redox potentials at the B3LYP/6-311+G(d,p) level, and verified the values by employing cyclic voltammetry experiments. Then we selected seven substituent groups (–F, –Cl, –OH, –COOH, –CN, –NH₂, and –NO₂ groups) to systematically investigate the substituent effect, including the sort, position, and number of the substituent, on the redox potentials of p-hydroquinone and pyrocatechol. The calculated results show that –NH₂ and –OH groups can decrease the redox potentials, while –F, –Cl, –COOH, –CN, and –NO₂ groups increase the potential values of p-hydroquinone and pyrocatechol. The calculations can accurately predict the substituent effects on the redox potentials of pyrocatechol and p-hydroquinone. We would expect that the accurate calculation results for the model systems could be applied in the prediction of electrode potentials of other molecules.     

Suzuki–Miyaura cross-coupling reaction of 1,2-oxaborol-2(5H)-ols with carboxylic anhydrides: a new method to furans

An efficient one-step method has been developed to construct furans via a Suzuki–Miyaura cross-coupling reaction of 1,2-oxaborol-2(5H)-ols with carboxylic anhydrides. In the presence of Pd(OAc)₂/PCy₃, the multi-substituted alkenylboron compounds could couple with anhydrides to obtain furans in moderate-to-good yields. The addition of bases promoted the coupling reaction, and the plausible reaction mechanism was proposed.     

纳米储能纤维复合过滤膜的制备及性能

以静电纺丝技术制备的同轴聚甲基丙烯酸十八烷基酯(PSMA)/聚对苯二甲酸乙二酯(PET)纳米储能纤维为支撑层,经聚偏氟乙烯(PVDF)涂覆成膜和溶剂化处理,制备了一种低压高水通量的纳米储能纤维复合过滤膜(NFCM),其中以水或乙醇为凝固溶液的复合过滤膜分别记为NFCM@H2O或NFCM@EtOH.分析并讨论了不同溶剂处理方式对NFCM力学性能和表面形貌的影响,表征了膜的纯水通量和抗污性能,用扫描电子显微镜(SEM)观察了膜的横断面形貌.结果表明,PSMA/PET纳米储能纤维具有明显的吸放热行为,熔融温度和热焓值分别为36.5℃和10.7J/g,NFCM的熔融温度和热焓值分别为36℃和2.7J/g.NFCM的形貌结构、纯水通量和截留率与溶剂处理方式相关,NFCM@EtOH膜的水通量介于100~1400L/(m2·h)之间,而NFCM@H2O膜的水通量仅在40~220L/(m2·h)之间.NFCM的拉伸强度由初始0.925MPa(PVDF)提高到4.28MPa以上.NFCM中的相变材料对膜过滤性能有重要影响,并在过滤温度低于50℃时具有减缓作用.