p型未掺杂富锌ZnO薄膜的形成和性能研究

以高纯ZnO为靶材,氩气为溅射气体,利用射频磁控溅射技术在石英衬底上生长出纤锌矿结构的富锌ZnO薄膜.薄膜沿(002)择优取向生长,厚约为1.2μm,呈现电绝缘特性.将溅射的ZnO薄膜在10-3Pa,510~1 000 K的温度范围等温退火1 h,室温Hall测量结果表明ZnO薄膜的导电性能经历了由绝缘—n型—p型—n型半导体的变化.XPS测试表明ZnO薄膜的Zn/O离子比随退火温度的升高而降低,但一直是富锌ZnO,说明未掺杂的富锌ZnO也可以形成p型导电.p型未掺杂富锌ZnO薄膜的形成可归因于VZn受主浓度可以克服VO和Zni本征施主的补偿效应.     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

A Convenient Synthetic Method of Metal Dendritic Porphyrins

Metal porphyrins are natural antioxidant reagent1-3. However, due to the characteristics of structures, they are only soluble in inorganic acids and part of polar organic solvents. Thus, it is limited to be used as effective pharmaceutical preparations. T…     

Rb（5PJ）＋Rb（5PJ）→Rb（5JS）＋Rb（nl=5D，7S）碰撞能量合并

研究了Rb(5PJ)+Rb(5PJ)→Rb(nlJ')+Rb(5S)碰撞能量合并过程,利用单模半导体激光器分别共振激发Rb原子的5P1/2或5P3/2态,利用另一与泵浦激光束反向平行的单模激光束作为吸收线探测激发态原子密度及其空间分布,吸收线分别调至5P1/2→5D3/2和5P3/2→7S1/2跃迁.由激发态原子密度和谱线荧光比得到碰撞能量合并过程的截面,对5P3/2激发,碰撞转移得到5D5/2,5D3/2和7S1/2的截面分别是(1.32士0.59)×10-14,(1.18士0.53)×10-14和(3.21士1.44)×10-15cm2;对5P1/2激发,碰撞转移到5D5/2和5D3/2的截面分别是(6.57士2.96)×10-15和(5.90士2.66)×10-15cm2.与其他的实验结果进行了比较.     

晶界内耗研究的新进展

由不同取向差的纯Al双晶的内耗实验观察到，不同类型晶界的弛豫参量有明屁差别。用耦合模型对内耗数据的分析表明，小角度晶界内耗的基本机制是位错攀移，而大角度晶界内耗的基本机制是晶界扩散。在此基础上，对多晶中晶界内耗的一些特征也作了解释。     

基于DSP的全数字交流位置伺服控制系统的研究

提出一种基于数字信号处理器（DSP）的全数字交流位置伺服控制系统。该系统充分利用了DSP周边接口丰富，运算速度快的特点，使所设计的系统硬件简单。实验结果表明，系统结构紧凑，具有良好的动态和静态特性。     

考虑材料熔化潜热的高温高压本构

本文在修正的SCG模型基础上，提出了一种考虑了熔化潜热的高温高压本构.该本构所给出的铝的剪切模量的变化分为三个阶段：加工硬化，温度软化和熔化，并在完全熔化点处变为零.并且在前两个阶段，计算的结果与修正的SCG模型所给出的剪切模量的差别不超过4%，这一差别是在动高压实验误差范围之内的，在熔化区所给出的剪切模量与现有的实验数据相符合. 关键词： 剪切模量 熔化潜热 修正的SCG模型 动高压实验     

生存的悖论:言语与沉默

通过对瑞典导演伯格曼的电影《假面》所进行的电影美学方面的文本分析,探讨存在于人类的言语与沉默之间的哲学与美学关系,并进而探讨电影作为一种语言的形式的本体论意义。     

Absorption Complex between Porphyrin and Phenothiazine in Reverse Micelles

Porphyrin derivatives attract much more interest in photodynamic therapy (PDT). Their importance as therapeutic drugs and targeting agents has been widely recognized1, and many of the efforts have been put towards crafting new porphyrin-based molecular entities to achieve enhanced tumor localization, better tissue penetration and increased singlet oxygen quantum yield2. The states of porphyrins in tissue models such as micelles, lipid bilayers are extensively investigated focusing more or l…     

接枝羧基的有限长碳纳米管电子结构的第一性原理研究

基于局域密度泛函理论，采用第一性原理方法，建立了对(5,5)型和(9,0)型有限长碳纳米管接枝羧基官能团的原子模型，通过计算其电子分布和态密度的变化，讨论羧基官能团对碳纳米管电子结构和电子输运特性的影响. 计算表明，接枝羧基的碳纳米管,其电子结构明显改变，其费米能级上的电子态密度下降；最高占据轨道上的非定域程度减弱,致使电子输运性能呈下降趋势. 关键词： 碳纳米管 密度泛函理论 电子结构