Molecular films of water-miscible ionic liquids formed on glassy carbon electrodes: characterization and electrochemical applications

This letter describes the formation and possible electrochemical applications of molecular films of water-miscible imidazolium-based ionic liquids (ILs) on glassy carbon (GC) electrodes. X-ray photoelectron spectroscopy (XPS) and electrochemical results indicate that the water-miscible ILs used in this study can interact with the GC electrode and form molecular films on the electrode surface. The formed molecular films are found to possess striking electrochemical properties such as electrocatalysis toward ascorbic acid (AA) and the capability to facilitate direct electron transfer of horseradish peroxidase (HRP). This demonstration would pave the way for new electrochemical applications of water-miscible ILs and is envisaged to be useful for the investigation of the electrochemical properties of water-miscible ILs in aqueous media provided the same counteranion is used as the supporting electrolyte.     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

An Efficient and High‐Yield One‐Pot Synthesis of Bis(oxazoline)s

An efficient and mild one‐pot synthesis of bis(oxazoline) (BOX) ligands is developed from reactions of dicarboxy dichlorides with β‐amino alcohols in the presence of 11.0 equiv. NEt₃ followed by the addition of 3.6 equiv. methanesulfonyl chloride (MsCl). Nine different BOX ligands were prepared in excellent yields of ≥ 80%. Advantages of this improved synthesis are mild reaction conditions, short total reaction time of 9 h, and high isolated yields.     

表面活性剂对纤维素接枝共聚物溶液粘度性质的影响

研究了阴离子十二烷基硫酸钠(SDS)、阳离子十六烷基三甲基溴化铵(CTAB)和非离子聚乙二醇辛基苯基醚(OP)等三种不同类型的表面活性剂对疏水化水溶性两性纤维素接枝共聚物(CGAO)溶液粘度性质的影响.结果表明,在SDS和OP的临界胶束浓度(cmc)附近，CGAO溶液粘度最大，SDS引起CGAO粘度的变化大于OP；即使在CTAB的cmc附近，随着CTAB浓度的增加，CGAO的粘度一直呈下降趋势；非疏水改性的纤维素接枝共聚物的溶液粘度随SDS或CTAB浓度的增加而下降，但几乎不随OP浓度的增大而变化.此外，通过凝胶渗透色谱法测得的保留时间证实了SDS、CTAB和OP与CGAO之间的疏水缔合作用.     

含热致液晶性共聚酯的聚砜共混物

将一种含萘环的热致液晶性共聚酯与聚砜树脂熔融共混并挤塑成条。毛细管流变性测试表明，这一共聚酯降低了共混物的表观粘度，甚至低于其本身的粘度。共混物受剪切作用形成了各向异性的微纤增强结构，并具有皮芯结构，在液晶聚俣物含量低到２％与０．５％的样条中仍有共聚酯微纤形成。共聚酯微纤提高了聚砜的力学性能，含２０％共聚酯共混物挤塑条的位伸模量为聚砜树脂的二倍半。     

富氧条件下乙炔选择催化还原NOx

Acetylene as a reducing agent of metal exchanged HY catalysts, for selective catalytic reduction of NO in the reaction system of 0.16% NO, 0 （C2H2-SCR） was investigated over a series 08% C2H2, and 9.95% O2 （volume percent） in He. 75% of NO conversion to N2 with hydrocarbon efficiency about 1.5 was achieved over a Ce-HY catalyst around 300 ℃. The NO removal level was comparable with that of selective catalytic reduction of NOx by C3H6 reported in literatures, although only one third of the reducing agent in carbon moles was used in the C2H2-SCR of NO. The protons in zeolite were crucial to the C2H2-SCR of NO, and the performance of HY in the reaction was significantly promoted by cerium incorporation into the zeolite. NO2 was proposed to be the intermediate of NO reduction to N2, and the oxidation of NO to NO2 was rate-determining step of the C2H2-SCR of NO over Ce-HY. The suggestion was well supported by the results of the NO oxidation with O2, and the C2H2 consumption under the conditions in the presence or absence of NO.     

茂铁基稀土铈配合物的合成与结构

本文利用单羧基二茂铁Fc-COOH和1，1′-二羧基二茂铁HOOC-Fc-COOH作为配体分别合成了双核铈配合物Ce₂(FcCOO)₆ (1)和二维层状配位聚合物Ce₂(OOC-Fc-COO)₃(2)，测定了两种配合物的晶体结构。配合物1中的金属铈离子为九配位结构，分别与周围的羧基二茂铁上的氧原子和作为辅助配体的水分子配位，茂铁间的π-π相互作用将配合物1的二聚体单元连结在一起形成二维的网状结构。配合物2中的金属铈离子亦为九配位结构，分别与周围的羧基二茂铁上的氧原子，作为辅助配体的水分子和甲醇配位形成类似于配合物1的二聚体单元，1，1′-二羧基二茂铁HOOC-Fc-COOH作为桥基配体将二聚体单元连结在一起，形成二维网状的配位聚合物。     

Preconcentration of copper with multi-walled carbon nanotubes pretreated by potassium permanganate cartridge for solid phase extraction prior to flame atomic absorption spectrometry

A procedure for the preconcentration of copper was described in this paper using multi-walled carbon nanotubes (MWCNTs) oxidized by potassium permanganate as the adsorbent for the enrichment of trace copper in water samples. Important parameters, such as the sample pH, the concentration and volume of eluent, sample flow rate and volume, and interference of coexisting ions, were investigated. The obtained results indicated that proposed method possessed an excellent analytical performance. The linear range, the detection limit, and precison (RSD) were 1-100 ng/mL (R2 = 0.9993), 0.32 ng/mL and 2.88%, respectively. The results showed that copper could be adsorbed quantitatively on the pretreated MWCNTs with potassium permanganate, and proposed method was very useful in the monitoring of copper in the environment.     

Approximate expressions of determining the double layer energy and force of interaction between two charged colloidal spheres

The approximate expressions have been obtained to calculate the electrical double layer energy and force between two spherical colloidal particles based on the improved Derjaguin approximation. Results for identical spheres interacting under constant surface potential, constant surface charge are given. Comparison of present results with numerical results calculated by Carnie and Chan is made. The expressions are found to work quite well for the constant surface potential case, and for the constant charge case, we make correction for the expressions. The results given are satisfactory providedkh0.4.