再生碳纤维电极的新方法

本文根据火焰熔融法自制碳纤维电极的特点，提出了一种简便、易行的火焰灼烧再生电极的新方法。由此法再生电极的各种性能与原电极相当，结果令人满意。     

手性氨基醇催化的前手性芳酮的不对称还原反应

首次以天然D-樟脑的衍生物为原料, 合成了两个新型龙脑基氨基醇配体, 研究了它们与硼烷原位制备成手性噁唑硼烷后, 在不对称催化氢化还原前手性芳酮中的性能, 得到的手性仲醇的对映体过量(ee)值最高可达96%, 还考察了反应温度、时间、溶剂等因素对苯乙酮的不对称氢化还原的化学产率和光学收率的影响.     

聚芳醚亚砜的合成与表征

以二苯醚和二氯亚砜为主要单体 ,在无水AlCl3/CH2 ClCH2 Cl/NMP催化剂溶剂体系中进行低温溶液共聚 ,合成聚芳醚亚砜 (PPOS) ,研究了AlCl3/NMP用量及单体摩尔比对聚合反应的影响 .用IR、DSC、TG和X ray等对PPOS进行结构和性能的分析与表征 ,研究结果表明 :PPOS属无定形聚合物 ,具有较高的玻璃化转变温度 (Tg) ,软化温度在 2 6 0℃左右 ,在加热过程中出现二个热分解温度     

PPC/SBR并用弹性体的配方选择

利用正交法对丁苯橡胶（SBR）／聚丙撑碳酸酯（PPC）共混弹性体进行配方设计，得到了一个具有良好综合性能的配方。并通过方差分析得出PPC含量和马来酸酐（MA）用量是影响弹性体拉伸性能的最显著因素。     

不饱和类锗烯H2C=GeNaBr的密度泛函理论研究

应用密度泛函理论DFT方法,在B3LYP/6-311G(d,p)水平上研究了不饱和类锗烯H2C=GeNaBr的结构及异构化反应.结果表明,不饱和类锗烯H2C=GeNaBr有3种平衡构型,其中非平面的p-配合物型构型能量最低,是其存在的主要构型.并对平衡构型间异构化反应的过渡态进行了计算,求得了转化势垒,预言了最稳定构型的振动频率和红外强度.     

新型(E)-1-取代苯基-3-(3''''-取代吲哚基)-2-丙烯酮类化合物的合成和抗炎活性研究

设计合成了一系列新的席合物3a～3p, 其结构经 1H NMR, IR, LC/MS确证. 用化合物对小鼠耳部巴豆油炎症影响的炎症模型测定化合物3a～3i的生物活性, 结果表明, 化合物3d, 3f, 3g可明显抑制巴豆油致小鼠耳部炎症. 其抑制率分别为19.5%, 27.6%, 16.1%.     

典型钙/镁基吸附剂对二氧化硒吸附特性研究

针对钙/镁基矿物吸附剂的主要组分CaO、CaCO₃、MgO在500-800 ℃下对Se的吸附特性进行研究，并选取天然矿物方解石、白云石研究其对Se的吸附效果，且对矿物煅烧所得CaO进行吸附实验。结果表明，三种组分中CaO的吸附效果最佳，800 ℃时单位质量CaO对Se的吸附量可达368 mg/g。CaCO₃对Se的吸附在700 ℃时效果最佳且其吸附产物的热稳定性较好。镁基吸附剂仅在中温段对Se具有一定吸附效果。方解石对Se的吸附效果随温度变化趋势与CaCO₃相似，因其较好的孔隙结构，吸附效果略优于CaCO₃。煅烧方解石得到的F-sor对Se的吸附效果优于CaO和CaCO₃煅烧得到的C-sor，这与其良好的比表面积、孔隙结构与抗烧结能力有关，且F-sor吸附产物的热稳定性相对较好。F-sor对Se的吸附量最高可达403 mg/g。     

Determination of medecamycin by adsorptive stripping voltammetry with an activated electrode

The adsorptive and electrochemical behaviors of medecamycin were investigated on a glassy carbon electrode (GCE) pretreated by anodic oxidation at +1.8 V for 5 min in 0.025 mol l^–1 NH₃-NH₄Cl (pH 8.6) solution. An adsorptive stripping voltammetric method for the determination of medecamycin at the pretreated glassy carbon electrode has been developed. Medecamycin was accumulated in NH₃-NH₄Cl buffer (pH 9.0) at a potential of –0.7 V (vs. saturated calomel electrode (SCE)) for a certain time, and then determined by second-order differential anodic stripping voltammetry. The second-order differential anodic stripping peak current at +0.72 V was proportional to the concentration of medecamycin in the range 2.0 g ml^–1 to 50.0 g ml^–1. The detection limit (three times the signal-to-noise) was 1.0 g ml^–1 and the relative standard deviation of the results was 3.28% for eight successive determinations of 10.0 g ml^–1 medecamycin. This method has been applied to the direct determination of medecamycin in commercial tablets and spiked urine samples with satisfactory results.     

SSCH3光解离的多参考理论计算

摘要运用多参考微扰理论(Multireference MΦller-Plesset theory)计算了SSCH3垂直激发能及其S-C与S-S两种断键方式的绝热(Adiabatic)与非绝热(Diabatic)的基态和激发态势能曲线, 研究了在193nm激光作用下SSCH3的光解离过程, 理论计算值与实验值相符.     

Self-assembled hybrid nanofibers confer a magnetorheological supramolecular hydrogel

Most magnetorheological materials, composed of magnetic microparticles in a liquid, require significant amounts of magnetic particles and a large magnetic field to achieve the desired effects. Here, we report on a new type of magnetorheological materials consisting of small amounts of magnetic nanoparticles (0.8 wt %) but exhibiting large rheological change (i.e., a gel-sol transition) upon the application of a small magnetic field. We use self-assembly to create hybrid nanofibers, which consist of supramolecular hydrogelators and magnetic nanoparticles, as the matrices of the hydrogel. Localized in the nanofibers at a distance of 1-2 nm, the magnetic nanoparticles occupy a small volume fraction of the hydrogel, significantly enhancing the magnetic dipole interactions between them, which results in the large magnetoresponse. This strategy generates a hierarchical nanostructure and eliminates several drawbacks of the simple mixture of polymers with nanoparticles, and thus provides a new methodology that uses magnetic force to control the nanostructures and properties of soft materials.