Time Series Prediction Based on Chaotic Attractor

A new prediction technique is proposed for chaotic time series. The usefulness of the technique is thatit can kick off some false neighbor points which are not suitable for the local estimation of the dynamics systems. Atime-delayed embedding is used to reconstruct the underlying attractor, and the prediction model is based on the timeevolution of the topological neighboring in the phase space. We use a feedforward neural network to approximate thelocal dominant Lyapunov exponent, and choose the spatial neighbors by the Lyapunov exponent. The model is testedfor the Mackey-Glass equation and the convection amplitude of lorenz systems. The results indicate that this predictiontechnique can improve the prediction of chaotic time series.     

ON THE ACOUSTIC ABSORPTION OF MULTI-LAYER ABSORBERS WITH DIFFERENT INNER STRUCTURES

A rigorous finite element analysis procedure is developed to study the effect of the inner structures on the acoustic absorption of multi-layer absorbers. To do this, four types of basic inner structure compartments adopted in the multi-layer absorbers are selected for analysis. These compartments are composed of porous materials inlaid with perforated plates of various shapes, say, triangle, semicircle, convex rectangle and plate shapes. As it is different from the conventional finite element analysis for the acoustic system in the literature, the perforated plates are simulated by appropriate equivalent boundary conditions, depending on their thickness, hole radius, hole pitch and porosity and the air contained in the holes. A large number of total degrees of freedom generated from meshing the air in the holes of perforated plates are thus avoided. The results reveal that the inner structures of the multi-layer absorbers will influence the acoustic absorption at some frequency bands significantly. Based on those features, the multi-layer absorber with a novel inner structure is then designed and manufactured. Both the finite element and experimental results show that its acoustic absorption would be distinctly promoted.     

Method of Homomorphic Encryption

The existing homomorphie eneryption scheme is based on ring of the integer, and the possible operators are restricted to addition and multiplication only. In this paper, a new operation is defined Similar Modul. Base on the Similar Modul, the number sets of the homomorphic encryption scheme is extended to real number, and the possible operators are extended to addition, subtraction, multiplication and division. Our new approach provides a practical ways of implementation because of the extension of the operators and the number sets.     

CFD在燃煤细粒子凝聚过程中的应用

燃煤产生的细粒子富集了大量的有毒痕量元素,对大气环境和人类健康造成严重危害。本文针对燃煤细粒子的形成过程,在计算流体力学(CFD)的基础上,结合气溶胶动力学理论,模拟了烟气中细粒子在圆柱形流场中由于碰撞而凝聚的过程,并通过计算结果分析细粒子颗粒特征参量(速度、质量、直径和颗粒数目)随流场的变化趋势,为深入研究燃煤细粒子的形成演化机理提供理论基础。     

葛根素治疗不稳定性心绞痛71例临床观察

目的 探讨在常规治疗基础上应用葛根素注射液治疗不稳定性心绞痛(UA)的疗效.方法 对于入院确诊为不稳定性心绞痛的患者,随机分为两组:对照组为常规抗凝组,低分子肝素5000 u皮下注射,1次/12 h,共5 d,阿斯匹林肠溶片0.3 g,1次/d,3 d后改为0.1 g,1次/d,长期服用;治疗组为葛根素组,葛根素300 mg静脉滴注,1次/d,其余治疗同对照组.结果 治疗组控制症状及改善异常心电图方面均优于对照组,并使C-反应蛋白(CRP)浓度更快下降,与对照组相比,差异有显著性(P＜0.05).结论 在抗凝及抗血小板基础上加用葛根素,治疗UA疗效优于常规抗凝治疗.     

声诱饵仿真试验系统

文章介绍了声诱饵仿真试验系统中的有关问题，包括：系统的组成、工作原理、对接装置结构等。建立了对接装置声耦合状态下的数学模型，对近场声压分布进行了仿真计算，得出了匹配材料厚度、发射和接收换能器的选取原则。     

乌桕类可可脂结晶过程中表现体积变化

为了解乌桕类可可脂(CTCBE)缓冷结晶横向胀罐爆裂原因，研究CTCBE结晶过程中的膨胀特性，采用流体静力法测试了不同等温结晶条件下CTCBE结晶形成的表观密度和表观体积及其横纵向膨胀状况。结果表明，CTCBE缓冷结晶后形成外部和中部两个晶区。在5-25℃的各等温结晶范围内，当结晶温度增加时，外部结晶区域减小、表观密度变化不大；中部结晶区域增大、表观密度明显减小，CTCBE的表观体积、横向、纵向膨胀率均增大，膨胀横向大于纵向。进一步表明CTCBE在自然缓冷固化的表观体积根本上由其结晶温度决定。为有效防止横向胀罐，自然缓冷固化温度应低于10℃。     

一种微穿孔板消声器

本文根据马大猷教授提出的“微穿孔板吸声体精确理论”，在对微穿孔板消声器结构参数与吸声特性之间的相互影响进行了分析的基础上，设计了微穿孔板消声器并将其应用在新舟60飞机APU(辅助动力装置)降噪的实际工程中，并通过编写的噪音数据采集分析程序，对降噪效果进行了测试和分析，验证出微穿孔板消声器对消除飞机的APU的排气噪声具有良好的消声效果，平均降噪7．16dB。     

中浓纸浆在反应器内的流动特性研究

中浓纸浆是一种非常特殊的介质,中浓纸浆在升流式反应器中的运动特性关系到反应器的反应效率和反应质量.为探求中浓纸浆在升流式反应器内的流动规律,作者利用自行研制的中浓纸浆漂白试验系统采用示踪法进行了研究.结果证明:中浓纸浆在升流塔内流动时的运动和塔器的截面形状,流动速度相关.对其中气体的运移也进行了一定深度的研究.     

PVC基活性炭的制备及其吸附性能的研究Ⅰ——PVC沥青的制备及其预氧化

以PVC树脂为原料,采用两个恒温段的程序升温方法加热脱氯制备PVC沥青,并通过空气预氧化法,对所制备的PVC沥青进行了预氧化处理.实验结果表明,PVC树脂在流速为100 mL/min氮气气氛中,以10℃/min速率程序升温至270℃,恒温脱氯150 min后再程序升温至410℃并恒温芳化120 min,可以制备出脱氯率和得率均较高的PVC沥青.该PVC沥青在300℃温度下,采用空气预氧化法预氧化120min,可获得增重率约为11%,氧化交联度较高、耐热性能较好的预氧化PVC沥青.FT-IR光谱分析结果表明,PVC沥青在预氧化的过程中,主要发生了氧化脱氢、脱水、CO2缩聚交联反应,使沥青形成耐热型的氧桥结构,从而达到预氧化目的.