透明导电玻璃(ITO)基材自加热传感静态芯片聚合酶链反应(PCR)

利用商品化ITO玻璃导电层的温阻效应, 无需任何微加工手段, 实现了自加热和传感的芯片温度自动程序控制, 最大程度地减小了传感滞后对温度控制稳定性的影响, 温度控制的稳定性达到了0.2 ℃, 升温速度最快可达20 ℃/s以上, 在冷却风扇辅助下降温速度最快达到了8 ℃/s. 芯片温控单元的引线从传统的两对(一对用于传感, 一对用于加热)减少为一对. 通过在该芯片上直接构建多个开放微池反应器的方法成功地实现了λDNA 157 bp片段的并行扩增. 将该芯片置于倒置荧光显微镜样品台上, 以蓝色(575 nm)发光二极管为光源, 以光电倍增管为检测手段检测了dsDNA和SYBR Green Ⅰ嵌合物的荧光强度随温度的实时变化曲线.     

用热分析技术测定碳化硅粉体对聚乙二醇的吸附量

用热分析技术TG-DTA(thermal gravimetric and differential thermal analysis)测定浆料中碳化硅粉体对分散剂聚乙二醇PEG(polyethylene glycol)的吸附量. 结果显示PEG在Ar气氛中411.5 ℃时完全分解; 碳化硅表面分散剂PEG的吸附量随着pH的增大而下降, 在较高pH下大多数分散剂仍存在于溶液中; 分散剂PEG的吸附量通过公式(1)进行计算. 该方法简单方便, 可以应用于测量氧化物或非氧化物吸附紫外-可见分光光度法不能测定的一些有机聚合物分子.     

One-dimensional Supramolecular Chain Based on a Dinuclear Terbium（Ⅲ） 4-Cyanobenzoate Complex

A new dinuclear Tb（Ⅲ） 4-cyanobenzoate complex [Tb2（4-cba）6（phen）2] （4-Hcba = 4-cyanobenzoic acid and phen = 1,10-phenanthroline） 1 has been synthesized by solvothermal reaction in an ethanol/water mixed solution at 100℃ and structurally characterized by single-crystal X-ray diffraction. Crystallographic data： C72H40N10O12Tb2, Mr=1554.98, triclinic Pi, a = 9.903（3）, b = 11.769（8）, c = 15.078（8）A, a = 111.42（12）, It = 96.37（19）, γ = 101-24（14）°, V= 1572（1）A3, Z= 1, Dc = 1.642 g/cm^3, F（000） = 768 μ = 2.305 mm^-1, the final R = 0.0205 and wR = 0.0543 for 5479 reflections with I 〉 2σ（I）. Structural analysis shows that 1 displays an isolated dinuclear structure. Two eight-coordinated Tb（Ⅲ） ions are bridged by four 4-cba ligands in the syn-syn bidentate coordination mode, and two other 4-cba ligands chelate these two Tb（Ⅲ） ions. The title complex molecules are connected through π-π stacking interactions to generate a one-dimensional supramolecular chain, The characteristic infrared spectra, luminescent properties and thermogravimetric analyses have also been discussed.     

γ－芳基取代烯丙醇菊酯的合成及杀虫活性

γ－芳基取代烯丙醇菊酯的合成及杀虫活性陈亚娟，黄润秋，马军安（南开大学元素有机化学研究所，天津，３０００７１）关键词γ－芳基取代烯丙醇，拟除虫菊酯，杀虫活性第一个人工合成除虫菊酯烯丙菊酯保留了天然除虫菊酯醇部分的环戊烯醇酮结构，至今仍广泛用作卫生杀虫...     

Chemical synthesis and firefly luciferase produced dehydroluciferyl-coenzyme A

Dehydroluciferyl-coenzyme A (L-CoA) was chemically synthesized and characterized by MS, UV-vis spectrometry and RP-HPLC. The identity of the chemically synthesized compound with the one that was produced by firefly luciferase was confirmed. Moreover, the reversibility of the enzymatic conversion of dehydroluciferin ? dehydroluciferyl-adenylate ? L-CoA was also confirmed. The chemical synthesis of L-CoA, described here, may help the clarification of the activator effect of CoA on luciferase bioluminescent assays, in which the enzyme catalyzed formation of L-CoA and the consequent destruction of L-AMP is one of the possible explanations for that effect.     

钠硼解石——水体系溶解和相平衡的研究(英)

Ulexite dissolution in water has been studied in the wide temperature range from 10℃ to 93℃ and two higher temperatures at 120 ℃ and 240 ℃. The analytical results showed that ulexite dissolved congruently from 10 ℃ to 35 ℃ and incongruently from 40 to 68 ℃. The solid component of ulexite, NaCaB₅O₆(OH)₆·5H₂O was dehydrated to form NaCaB₅O₆(OH)₆·H₂O from 50 to 68 ℃ and finally amorphous solid at 68 ℃. This amorphous solid converted into priceite at 71 ℃ and then converted completely to priceite at the boiling point(93℃) of the solution. At both 120 and 240 ℃, the dissolution of ulexite was an incongruent process. Above 120 ℃, ulexite became amorphous solid and then transformed into priceite. In addition to the solid to solid transformation, crystallization of priceite from the solution has also been observed. Based on our experimental results, mechanisms of dissolution, transformation, and crystallization of borate in ulexite-water system are discussed.     

A Novel Dimeric Coumarin from Clausena lenis

A novel dimeric coumarin (1), a dimeric of seselin named diseselin A, was isolated from the aerial part of Clausena lenis. The structure was elucidated based on the MS, 1D and 2D NMR data.     

Ce-Zr-Ba-O纳米材料的制备及其结构与性能研究

以金属硝酸盐为原料,分别采用高分子前驱体法、柠檬酸盐凝胶法制备了纳米级的Ce-Zr-Ba-O复合氧化物超细粒子,采用X-射线衍射(XRD)、透射电镜(TEM)、BET比表面测定、热重-差热(TG-DTA)技术对催化剂进行了表征,并考察了催化剂的CO氧化活性和热稳定性。实验结果表明,高分子前驱体法和柠檬酸盐凝胶法制备的催化剂粉体都达到了纳米级。两种方法中,高分子前驱体法所制得的催化剂的BET比表面达118.96m²·g^-1,CO氧化反应活性较高,同时该方法制得的催化剂分散性好,无团聚,经1000℃高温焙烧后仍基本无烧结、无团聚现象,具有较高的热稳定性。     

A New 4.0-Generation Dendrimer Phosphorescence Labeling Reagent and Its Application to Determination of Trace Alkaline Phosphatase by Affinity Adsorption Solid Substrate-room Temperature Phosphorimetry

A Triton X-100-4.0G-D （4.0G-D refers to a 4.0-generation dendrimer） was brought forward as a new phosphorescence labeling reagent. Two types of specific affinity adsorption （AA） reactions （direct method and sandwich method） were carried out between the labeling product of Triton X-100-4：0G-D-Wheat germ agglutinin （WGA） and alkaline phosphatase （ALP）, the product of AA reaction preserved the good characteristics of room temperature phosphorescence （RTP） of 4.0G-D and △Ip of the product was proportional to the content of ALP. According to the fact stated above, a new method for the determination of trace ALP by affinity adsorption solid substrate-room temperature phosphorimetry （AA-SS-RTP） was established on the basis of WGA labeled with the Triton X-100-4.0G-D. The detection limits were 0.20 ag·spot^-1 （corresponding concentration： 5.0×10^-16 g·mL^-1, namely 5.0×10^-18 mol·L^-1） for a direct method and 0.14 ag·spot^-1 （corresponding concentration： 3.5×10^-16 g·mL^-1, namely 3.5×10^-18 mol·L^-1） for a sandwich method, respectively. For their high sensitivity, good repeatability and high accuracy, the direct method and sandwich method have been successfully appfied to determine the content of ALP in human serum, and the results were coincided with the clinical detection results of the enzyme-linked immunosorbent assay method by the Zhangzhou Hospital of Traditional Chinese Medicine. Meanwhile, the mechanism for the determination of trace ALP by AA-SS-RTP was discussed.     

Pr0.6-xNdxSr0.4FeO3-δ电极材料的光谱及性能研究

以柠檬酸-硝酸盐自蔓延燃烧法合成了ABO₃型钙钛矿结构的Pr_0.6-xNd_xSr_0.4FeO_3-δ(x=0.0～0.6)系列稀土复合氧化物粉体。利用傅立叶变换红外光谱(FTIR)和激光共焦拉曼光谱(LRS)对产物的晶体结构进行了表征。分别采用热膨胀仪测定烧结陶瓷体的热膨胀系数(TEC)；TG-DTA记录材料的热稳定性；XRD研究阴极材料与中温电解质Sm_0.2Ce_0.8O_1.9(SDC)及La_0.8Sr_0.2Ga_0.8Mg_0.2O_3-δ(LSGM)的化学相容性；SEM观察阴极/电解质复合材料的断口形貌。结果表明，该系列样品在高、低温热循环过程中化学稳定、晶型稳定；在室温至1 100 ℃范围内的平均热膨胀系数为1.16 × 10^-5 K^-1，与SDC及LSGM的热膨胀系数十分接近。阴极/电解质混合粉体1 200 ℃煅烧10 h，XRD未检测到新物质；SEM显示复合层断面界面清晰，没有相互扩散现象。该体系有望成为以SDC或LSGM为电解质的中温固体氧化物燃料电池合适的阴极材料。