Rapid—In—situ Determination of Chromium （VI） in Water Using Modified Diphenylcarbazine with Citrate

In recent years, the determination of Cr (VI) has attracted great attention because of its toxicity to human, plants and animals1-5. Usually, in the industrial waste water, the concentration of Cr (VI) is relatively high and should be determined frequently. So, an accurate, quick, and convenient method for the measurement of Cr (VI) in environmental water, as well as in river, lake, sea and tap water, is of great importance. The method for determination of Cr (VI) by diphenylcarbazine …     

端视式全谱直读电感耦合等离子体发射光谱法测定高纯氧化镧中稀土杂质

电感耦合等离子体发射光谱(ICP-AES)测定高纯氧化镧中14个稀土元素杂质,镧对其它稀土元素的光谱干扰比较严重,要求光谱仪单色器有较高的分辨率。使用端视式全谱直读ICP-AES仪,选择测定波长,工作参数优化,讨论了镧和酸度的影响。大部分稀土元素测定使用曲线拟合(FACT)的背景校正方法。该方法的稀土元素氧化物检出限达到3×10-4~0.022 mg.L-1(3σ)。     

纳米晶PbTiO3负载CuO催化NO分解

A large specific surface area perovskite-type mixed oxide PbTiO₃ supported cupric oxide was synthesized as a catalyst for NO decomposition and characterized by techniques such as XPS, XRD, H₂-TPR before and after NO decomposition reactions. The catalytic properties were tested with a fix-bed micro-reactor. The results showed that the PbTiO₃ was inactive for the reactions, but 1wt % Cu/PbTiO₃ catalyst gave fairly good activities for NO decomposition at temperature as low as 473 K. Copper species were found well-dispersed but weakly interacted with the support before NO decomposition, and the NO decomposition caused significant change in the environment of the copper species, which became Cu(Ⅰ) and most probably incorporated into surface crystal lattice of the nano-sized PbTiO₃. In NO reaction, a large amount of oxygen atoms from the decomposition of NO penetrated into the nano-sized PbTiO₃ support and caused small expansion of crystal lattice. The transport of oxygen between the copper species and the catalyst support may be helpful to speed up the kinetic regeneration of active metal sites from oxygen occupancy and resulted in good catalytic performance.     

DFT法研究离子液中EMIM~ 催化丁烯双键异构反应机理(II)

用密度泛函理论(DFT)在B3LYP/6鄄31G(d,p)的计算水平上研究了离子液中1鄄乙基鄄3鄄甲基咪唑阳离子(EMIM )的4鄄H和5鄄H原子催化丁烯双键异构反应的可能途径,优化了反应体系的平衡态和过渡态的几何构型,分析了反应过程中键参数的变化,通过振动分析对平衡态和过渡态进行了验证.计算结果表明,离子液中的EMIM 首先通过4鄄H和5鄄H原子吸附丁烯,进而催化丁烯的双键异构反应,EMIM 的4鄄H和5鄄H催化1鄄丁烯异构为2鄄丁烯的正反应活化能分别为204.2和207.3kJ·mol-1,逆反应活化能约为220.9和223.8kJ·mol-1,反应为基元反应.     

有机分子与聚电解质静电吸附成膜特性研究

选取多种有机分子及聚电解质，采用静电吸附自组装法制备了聚电解质，聚电解质、聚电解质，有机分子、有机分子，有机分子的复合薄膜，讨论了这些体系的静电吸附成膜特性及其成膜机理．     

奥利司他的全合成研究进展

综述了减肥药物奥利司他的全合成的研究进展. 根据合成策略上的不同, 将全合成研究分三部分进行了概述.     

TiO_2-CeO_2催化剂湿式氧化苯酚的活性研究

采用共沉淀法制备了湿式氧化降解苯酚的TiO2-CeO2催化剂,测定了反应过程中不同反应时间的COD去除率,结果表明,当Ti、Ce摩尔比为3∶1时,在150℃、总压5MPa(其中氧分压4.5MPa)时,所制备的催化剂活性最高,反应90分钟COD去除率可以达到71%.对催化剂进行了比表面积、XRD和XPS测试,结果表明,高效的催化剂具有较多的活性位、催化剂粉末体系Ce的变价特性以及大量的表面吸附氧.     

硝基苯在离子液体BMimBF4-H2O中的电还原

采用循环伏安法和恒电位电解法研究了离子液体BMimBF4-H2O 中硝基苯在微铂电极上的电还原特性. 实验表明, 在BMimBF4中, 随着硝基苯和水的浓度变化, 循环伏安曲线的峰电位和峰电流呈现复杂的变化规律; 硝基苯在铂电极上的电还原反应为双分子8 电子3 步骤电化学过程, 第一步反应为准可逆单分子单电子转移步骤, 产生阴离子自由基, 第二步为2 电子转移步骤, 并伴有随后的双分子不可逆自由基偶合化学反应, 主要产物为氧化偶氮苯, 第三步是2 电子转移产生偶氮苯的过程.     

ELECTRON PARAMAGNETIC RESONANCE STUDIES OF SINGLE CRYSTAL SODIUM HEXAMOLYBDOCHROMATE (Ⅲ)Cr~(3+)/Na_3(AlMo_6O_(24)H_6)·8H_2O

An X-band EPR study on a Na_3(CrMo_6O_(24)H_6)·8H_2O single crystal diluted by its isomor-phic compound Na_3(AlMo_6O_(24)H_6)·8H_2O at room temperature is reported. Using the least squares-fitting method to simulate the EPR data for principal planes, the Hamiltonian parameterswere obtained. The principal values of the g tensors are g_(ZZ) = 1.904, g_(XX)= 1.973, g_(YY)=1.933. The zero field splitting tensor parameters are D = 0.275 cm~(-1), E = 0.05 cm~(-1). The fielddependence of Cr~(3+) energy levels with field at different angles from the principal axes whenthe field is along the principal planes is calculated based on these experimental parameters.The isofrequency plots of calculated field vs. angle are also shown. They agree well with theexperimental results.     

十二烷基硫酸钠毛细管电泳法分析非还原单克隆抗体药物纯度的前处理条件优化

十二烷基硫酸钠毛细管电泳法因具有快速、分辨率高的优势，已成为单克隆抗体纯度分析的主流方法。在非还原单克隆抗体纯度检测中，其样品前处理过程对于结果有显著影响。为优化样品前处理，考察了以碘乙酰胺和N-乙基马来酰亚胺为巯基封闭剂，在pH 6.0~9.0的样品缓冲液条件下，不同种类和批次的单抗的纯度。发现在两种巯基封闭剂中，高pH的样品缓冲液会影响巯基封闭的效果，产生较多的抗体片段；而在低pH条件下，抗体片段较少，单抗的纯度更高。因此在进行非还原单抗的纯度检测中，pH 6.0的样品缓冲液为最佳的前处理条件。