Promoting effect of sol-gel method and pre-treatment on the activity of SnO2/Al2O3 catalyst for NO reduction by propene

SnO₂/Al₂O₃ catalyst prepared by sol-gel method showed higher activity than those prepared by impregnation method, and their activity was significantly improved by pre-treatment in the reaction gas. The increased activity is closely related to the agglomeration of SnO₂ species and the re-exposure of Al₂O₃, which was previously covered by dispersed SnO₂ species. This revised version was published online in June 2006 with corrections to the Cover Date.     

(ClAlNH)n簇合物的结构与稳定性

用量子化学从头算方法（HF／6－31G）和密度泛函理论（DFT）的B3LYP方法，以6－31G标准基组加一个极化函数，对（ClAlNH)n(n=1-10)簇合物的几何构型，电子结构和红外光谱进行了优化，并讨论了聚合反应（ClAlNH)m→(ClAlNH)n的热力学效应，结果表明，（ClAlNH)n系列簇合物的基态稳定结构为Cs(n=1),D2h(n=2),D3h(n=3),Td(n=4),Cs(n=5),D3d(n=6),Cs(n=7),S4(n=8),D3h(n=9),C2h(n=10,n=2,4,6,8,10等偶数对应的（ClAlNH)n簇化合物的结构比n等于奇数量更稳定。     

2, 2＇─(1, 4─亚乙二氧基)—二苯甲酸与钴(Ⅱ)生成的两种配合物的结构研究

硝酸钴与２，２＇－（１，４－亚乙二氧基）－二苯甲酸（Ｈ２Ｌ，图１）作用分别得到红色配合物ＣｏＬ＇和蓝色配合物ＣｏＬ″。经元素分析、红外光谱、紫外可见光谱、热分析等方法进行了表征、ＣｏＬ＇配合物的分子式为［ＣｏＬ．Ｈ２Ｏ］．３Ｈ２Ｏ，近八面体构型，羧酸根以双齿形式与Ｃｏ（Ⅱ）螯合；ＣｏＬ″配合物分子式为［ＣｏＬ″］。Ｈ２Ｏ，近四面体构型，羧酸根以单齿形与Ｃｏ（Ⅱ）配位。     

水热法合成K0.5Bi0.5TiO3纳米陶瓷粉体

K_0.5Bi_0.5TiO₃(KBT)nanocrystalline particles were hydrothermally synthesized from Bi(NO₃)₃·5H₂O, TiO₂ and KOH. The crystal phase, chemical composition and microstructure were characterized by XRD, XRF, Raman scattering spectroscopy and TEM. The results indicated that the products were pure perovskite structured K_0.5Bi_0.5TiO₃ with chemical stoichiometry and perovskite structure. The TEM observation revealed that the particles possessed a feature of cubic shape and a nano-scale of about 40 nm. The KBT ceramics sintered at 1 040 ℃ from hydrothermal powders show higher density and better electric properties than that prepared by a solid-state reaction method.     

流动注射化学发光抑制法测定维生素E

实验发现,H2SO4-KMnO4-甲醛在丙酮存在下发光信号大大增强,据此建立了H2SO4-KMnO4-甲醛-丙酮新体系。同时发现维生素E(VE)对H2SO4-KMnO4-甲醛-丙酮化学发光体系有强烈的抑制作用,建立了维生素E的流动注射化学发光抑制法的新体系。化学发光信号的降低值与VE的浓度在1.0×10-5~1.0×10-3mol/L的范围内呈良好的线性关系,方法的检出限为3.0×10-6mol/L。对1.0×10-4mol/L的VE进行11次平行测定,其相对标准偏差为1.5%。该法已用于VE片剂中VE的测定。     

Synthesis and Crystal Structure of Glycin·3,5-Dihydroxybenzoic Acid

The title compound glycin·3,5-dihydroxybenzoic acid (GDB) has been synthesized and characterized by single-crystal X-ray analysis. It crystallizes in orthorhombic, space group Pca21 with a = 25.513(10), b = 4.668(2), c = 9.150(4)(A), Z = 4, V = 1089.8(8)(A)3, C9H13NO7, Mr = 247.20, Dc = 1.507 g/m3, μ(MoKα) = 0.132 mm-1, F(000) = 520, R1 = 0.0322 and wR2 = 0.0611 for 885 observed reflections (I > 2σ(I)). The title compound is a 1:1 molecular complex of glycin and 3,5-dihydroxybenzoic acid, which is linked by O-H…O and N-H…O hydrogen bonds to form a three-dimensional framework. Test of SHG (second harmonic generation) indicates that NLO generation of the crystal is higher than that of KDP.     

弱碱性阴离子交换树脂分离1,6—二磷酸果糖的研究

采用弱碱性阴离子交换树脂HJ-30对发酵液中1，6-二磷酸果糖的分离进行了研究。详细地研究了树脂的吸附和脱附性能。实验结果表明，HJ-30树脂对FDP的吸附量达0．28gFDP／g湿树脂，以0．05mol／LNaCl洗脱光机磷和1mol／LNaCl洗脱1，6-二磷酸果糖，产品的收率和纯度分别为92％和99．4％。     

Influence of ultrasonic field on microcystins produced by bloom-forming algae

Under the background of algae removal and growth inhibition by ultrasonic irradiation, the effects of ultrasonic irradiation on removal of Microcystis, the concentration variation of microcystins (MC) produced by Microcystis in Microcystis suspension, and sonochemical degradation of microcystins in water, were studied in the paper. The results showed that ultrasonic irradiation could efficiently inhibit the growth of Microcystis, and ultrasonic irradiation shorter than 5 min would not introduce the increase of microcystins dissolved in Microcystis suspension simultaneity. Also, microcystins dissolved in Microcystis suspension would not increase as ultrasonic power increasing. Further research showed that microcystins were effectively degraded in ultrasonic fields. After 20 min ultrasonic irradiation at 150 kHz and 30 W, the removal rate of microcystins reached 70%.     

Novel synthesis of a strained para-cyclophane derivative

A [P. Rajakumar, A.M.A. Rasheed, Tetrahedron 61（22） （2005） 5351] para-cyclophane derivative was synthesized via intramolecular esterification of a dipeptide surrogate containing asparagine to form tetrahydropyrimidinone ring. The structures of the product and intermediates were characterized by 1H NMR, 13C NMR and mass spectrum.     

Crystalline Morphology and Polymorphic Phase Transitions in Electrospun Nylon 6 Nanofibers

Uniform nylon 6 nanofibers with diameters around 200 nm were prepared by electrospinning. Polymorphic phase transitions and crystal orientation of nylon 6 in unconfined (i.e., as-electrospun) and a high T(g) (340 degrees C) polyimide confined nanofibers were studied. Similar to melt-spun nylon 6 fibers, electrospun nylon 6 nanofibers also exhibited predominant, meta-stable gamma crystalline form, and the gamma-crystal (chain) axes preferentially oriented parallel to the fiber axis. Upon annealing above 150 degrees C, gamma-form crystals gradually melted and recrystallized into the thermodynamically stable alpha-form crystals, which ultimately melted at 220 degrees C. Release of surface tension accompanied this melt-recrystallization process, as revealed by differential scanning calorimetry. For confined nanofibers, both the melt-recrystallization and surface tension release processes were substantially depressed; gamma-form crystals did not melt and recrystallize into alpha-form crystals until 210 degrees C, only 10 degrees C below the T(m) at 220 degrees C. After complete melting of nano-confined crystals at 240 degrees C and recrystallization at 100 degrees C, only alpha-form crystals oriented perpendicular to the nanofiber axis were obtained. In the polyimide-confined nanofibers, the Brill transition (from the monoclinic alpha-form to a high temperature monoclinic form) was observed at 180-190 degrees C, which was at least 20 degrees C higher than that in unconfined nylon 6 at approximately 160 degrees C. This, again, was attributed to the confinement effect.