非公有制经济参与西部大开发若干问题的研究

我国经济发展机制的重要变化是非公有制经济迅速成长壮大,并以其特有的活力与生机成为经济发展的新的增长空间。注重和加强非公有制经济参与西部大开发的问题研究,对促进以国有经济为主导的西部地区经济高速发展,具有重要的理论意义和实际意义,并能为政府关于区域和西部开发的发展战略提供参考依据。     

半环式传感型骨外固定器的力学特性实验

通过对尸胫骨 -传感器骨外固定器系统的动、静刚度及应力遮挡率进行了实验研究 ,表明半环四针传感型骨外固定器较两针型的刚度大 ,因此在骨愈合初期、粉碎性骨折宜采用四针结构 ,以避免错位、成角 ;愈合中后期用两针结构 ,以减小应力遮挡     

Millimeter wave beams diffracted from reflecting gratings

According to the angular-spectrum method, a radiation beam of an antenna horn in the Fresnal region is decomposed into the plane waves with the fast Fourier transform algorithm and the waves diffracted from a reflection grating are superposed as a diffracted beam. Compared with the reflected beam from the same size mirror, the radiation half width of the diffracted beam from a grating is narrower and its lateral shape is shift. These performances have been experimentally verified at Ka-band by: (1). The relative diffraction efficiencies in the first order with two triangular gratings which is put along propagating direction of a beam produced by a conical lens-horn. (2). H-plane lateral width with power—3dB lapsed of the focus beam from a grating and a mirror in a grating spectrometer for millimeter waves (25–100 GHz).     

在BBO中产生217.3-2 21.4nm高功率和频输出

用Q-YAG激光的三次谐波(355nm)与调谐的Rh·6G染料激光在β-BaB2O4(BBO)晶体中和频,获得217.3～221.4nm连续调谐输出,和频输出的最大能量为250μJ,转换效率为11%.我们还讨论了获取最大和频输出能量的一些实验条件.     

HL—1装置等离子体密度反馈实验

本文叙述HL-1装置用反馈脉冲补充送气方式控制等离子体密度的方法及实验结果。给出了在固有的物理实验条件下的最佳反馈方式,实现了对密度的有效控制及反馈。讨论了在不同密度条件下的几种反馈方式及反馈系统尚存在的不足之处。     

逃离与穿越 --墨白中篇小说论

逃离与穿越是墨白中篇小说创作在处理与现实关系上的基本策略和个人立场，形而上与形而下、虚幻与真实、存在感与现实性、感觉与具象高度和谐地融入本中，赋予了主题的超越性；同时，在艺术探索上，墨白为当代学也提供了新鲜的经验。     

The Drazin inverses of products and differences of orthogonal projections

In this note, the Drazin inverses of products and differences of orthogonal projections on a Hilbert space are established.     

TiO2对合成渣中Fe2O3还原发泡过程的影响

研究了不同条件下TiO2和Fe2O3在合成渣中被碳还原时的发泡过程．计算了该发泡过程的发泡系数、消泡系数、平均发泡寿命、发泡强度和消泡过程开始的时间．用熔渣发泡参数定量地讨论了温度、TiO2加入量和初渣中TiC的含量对熔渣发泡过程的影响，发现当初渣中TiC的含量和TiO2加入量较多时，在发泡时会产生二次发泡现象．     

Investigation on crosslinking behaviors of NBR/PVC filled with anhydrous copper sulfate particles by dynamic mechanical analysis

Crosslinking behaviors of acrylonitrile butadiene rubber (NBR)/poly (vinyl chloride) (PVC) alloy, filled with anhydrous copper sulfate (CuSO₄) particles, were investigated for the first time by dynamic mechanical analysis (DMA) under hetero and isothermal modes, respectively. In the heterothermal testing, (NBR/PVC)/CuSO₄ compound showed two marked increases in the storage modulus (E′), corresponding to coordination crosslinking of NBR-CuSO₄ and self-crosslinking of NBR and PVC respectively. During the isothermal testing, a dramatic increase in E′ was found at the initial stage while that of original NBR/PVC alloy was not detected. The marked increase in E′ of (NBR/PVC)/CuSO₄ compound was mainly due to the crosslinking induced by coordination between  CN and Cu²⁺. The increasing extent of E′ increased with the rise of CuSO₄ content, suggesting the formation of a greater number of crosslinks. Moreover, the activation energy (E_a) of crosslinking process was about 139 kJ/mol. In this work, fourier transform infrared spectrum (FT-IR) and equilibrium swelling method were also performed for the characterization of the compound. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 41–51, 2007