L-鼠李糖基(氨基)硫脲类化合物的合成

以L-鼠李糖为起始原料, 制备1-溴-2,3,4-三-O-乙酰基-β-L-吡喃型鼠李糖, 然后在甲苯中与Pb(SCN)₂作用, 得到中间体2,3,4-三-O-乙酰基-α-L-吡喃型鼠李糖基异硫氰酸酯(1). 利用2,3,4-三-O-乙酰基-α-L-吡喃型鼠李糖基异硫氰酸酯易发生亲核加成的性质, 在不同溶剂中, 与取代的苯并噻唑胺(2a～2f)、取代的苯并噻唑肼(2g～2l)、氧化和非氧化的哒嗪酮甲酰肼(2m, 2n)以及取代的嘧啶胺(2o, 2p)反应, 合成了16种新的(氨基)硫脲类化合物3a～3p. 所有化合物的结构均经IR, ¹H NMR, LC-MS和元素分析确证, 并对它们的生物活性做了初步测试.     

A Novel 3‐D Heterobimetallic Cyano‐bridged Coordination Polymer Incorporating Ag···Ag Interaction: [Cu(dien)Ag(CN)2]2[Ag2(CN)3][Ag(CN)2]

A three‐dimensional cyano‐bridged copper(II) complex, [Cu(dien)Ag(CN)₂]₂[Ag₂(CN)₃][Ag(CN)₂] ( 1 ) (dien = diethylenetriamine), has been prepared and characterized by X‐ray crystallography. Complex 1 crystallized in the monoclinic space group P2₁/n with a = 6.988(2), b = 17.615(6), c = 12.564(4) Å, β = 90.790(5)°. The crystal consists of cis‐[Cu(dien)]²⁺ units bridged by [Ag(CN)₂]^— to form a zig‐zag chain. The Ag atoms of the free and bridging [Ag(CN)₂]^— link together to form additional infinite zig‐zag chains with short Ag···Ag distances. The presence of Ag···Ag interactions effectively increases the dimensionality from a 1‐D chain to a 3‐D coordination polymer.     

聚(4-偶氮磺酸苯乙烯-co-4-乙烯基吡啶)与本征态聚苯胺的氢键自组装及其光电转换性能

合成了一种新的共聚体——聚(4-偶氮磺酸苯乙烯-co-4-乙烯基吡啶), 它含有吡啶环, 能作为氢受体与本征态聚苯胺进行氢键自组装. 在紫外光照下, 组装膜通过偶氮磺酸基的光解, 形成稳定的共价交联结构, 在电解质水溶液中也不被破坏, 可用作光电转换膜, 并能在盐水溶液中直接测定它的光电流. 结果表明含有本征态聚苯胺的自组装膜是一种良好的光电转换材料.     

离子色谱法测定皂粒中葡萄糖酸钠含量

建立了离子色谱检测皂粒中葡萄糖酸钠含量的分析方法。样品经METROSEP CARB 1糖分析色谱柱(150 mm×4.0 mm,5μm)分离,以150 mmol·L~(-1) NaOH+20 mmol·L~(-1)NaAc水溶液为流动相进行等度洗脱,流速1.0 mL·min~(-1),采用瑞士万通850型离子色谱仪,选择脉冲安培检测器进行测定,外标法定量。结果显示:葡萄糖酸钠在0.5～200 mg·L~(-1)质量浓度范围内呈良好的线性,相关系数(r~2)为0.999 6,检出限为0.25 mg·L~(-1),定量下限为0.63 mg·L~(-1)。葡萄糖酸钠在1～20 mg/g加标范围内的回收率为80.7%～104%。该方法无需衍生化处理,操作简单方便,灵敏度高,可用于皂粒产线葡萄糖酸钠含量的监控与测定。     

1,3‐dipolar cycloaddition reactions of nitrile oxides to prop‐1‐ene‐1,3‐sultone

The reaction of prop‐1‐ene‐1,3‐sultone 1 with a variety of nitrile oxides 3 afforded novel [3+2] cycloaddition products 4 in good yield. The cycloaddition reaction achieved excellent regioselectivity.     

CoCl_2·6H_2O or LaCl_3·7H_2O Catalyzed Biginelli Reaction. One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1 H)-ones

Ｉｎｔｒｏｄｕｃｔｉｏｎ1,4 Ｄｉｈｙｄｒｏｐｙｒｉｄｉｎｅｓｏｆｔｈｅｎｉｆｅｄｉｐｉｎｅｔｙｐｅ (ｅ .ｇ .Ｉ—ＩＩＩ)ａｒｅｔｈｅｍｏｓｔｓｔｕｄｉｅｄｃｌａｓｓｏｆｏｒｇａｎｉｃｃａｌｃｉｕｍｃｈａｎｎｅｌｍｅｄｉｃｉｎｅ ,ｗｈｉｃｈｈａｖｅｂｅｃｏｍｅａｌｍｏｓｔｉｎｄｉｓｐｅｎｓ ａｂｌｅｆｏｒｔｈｅｔｒｅａｔｍｅｎｔｏｆｃａｒｄｉｏｖａｓｃｕｌａｒｄｉｓｅａｓｅｓｓｕｃｈａｓｈｙｐｅｒｔｅｎｓｉｏｎ ,ｃａｒｄｉａｃａｒｒｈｙｔｈｍｉａｓ ,ｏｒａｎｇｉｎａ .1Ｉｎｔｈｅｐａｓｔｄｅｃａｄｅ…     

Real-time Quantitative RT-PCR for CT9 Level in Human Cancer

Introduction Malignantdiseasesarecharacterizedbytheunreg ulatedgrowthoftransformedcells.Inrecentyears,dramaticinsightsintothemolecularmechanismsofthis phenomenonhavebeenachievedfrombasiccancerre search.Manycellularfunctionsareregulatedbychan gesingeneexpr…     

甲烷氧化偶联催化剂La2O3／SrCO3—BaCO3的催化活性与表征

在甲烷氧化偶联制Ｃ２烃的研究中，人们发现碱土金属与稀土金属组成的复合氧化物催化剂具有高的催化活性［１，２］．稀土化合物作为有希望的工业催化剂之一，已受到广泛的关注．一般认为，它们含有的氧空位对活化甲烷的有效氧物种有利．Ｄｅｂｅｙ等在１％Ｓｒ／Ｌａ２Ｏ...     

Pressurized gradient capillary electrochromatographic separation of eighteen amino acid derivatives

A pressurized gradient capillary electrochromatography (pCEC) instrument was developed to separate 18 amino acid derivatives. A reversed-phase C18 column (3 microm, 130 mm x 75 microm I.D.) and an acetate buffer (50 mmol/l NaAc, pH 6.4) with an ion-pair reagent (1% N,N-dimethylformamide) were used to separate derivatized amino acids from a standard solution (2 microg/ml), and the wavelength of the UV-Vis detector was 360 nm. The pressure on the capillary column was kept at approx. 70 Pa and 3 kV positive voltage was added on the outlet end of column. The effect of voltage on the eluting order of amino acids and the resolution of separation were studied, and it was found that when the voltage was higher than 3 kV, the adsorption of amino acids in the porous C18 column occurred. The effect of salt concentration, injection volume, and column length on the separation of amino acids was determined. The amino acid sample was separated by pCEC, and RSDs of the migration times of each amino acid were all less than 2.5%.     

Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.