关于高等教育产业化若干争议的辨析

高等教育产业化问题引起了较大的争议。对争议中的高等教育市场化、．企业化的若干问题，作了针对性的辨析。     

Chaos Synchronization Criterion and Its Optimizations for a Nonlinear Transducer System via Linear State Error Feedback Control

Global chaos synchronization of two identical nonlinear transducer systems is investigated via linear state error feedback control. The sufficient criterion for global chaos synchronization is derived firstly by the Gerschgorin disc theorem and the stability theory of linear time-varied systems. Then this sufficient criterion is further optimized in the sense of reducing the lower bounds of the coupling coefficients with two methods, one based on Gerschgorin disc theorem itself and the other based on Lyapunov direct method. Finally, two optimized criteria are compared theoretically.     

A MEMS-Based Piezoelectric Power Generator for Low Frequency Vibration Energy Harvesting

A novel power generator has been achieved to convert vibration to electrical energy via the piezoelectric effect. The generator obtained by micro fabrication process mainly consists of silicon based frame and composite cantilever. The prototype tested at resonant vibration generates 1.15μW of effective power to a 20.4-kΩ resistance load. The potential of this work is to offer miniaturization solutions for power generators, and with the proposed method the ambient ubiquitous vibration can be harvested effectively as endless energy source to form an integrated self-powering system.     

热塑性材料的缺口敏感性实验研究

实际的机器结构为了工作需要，其各部件之间总需要某种联接，从而必然会带有所谓的广义上的切口；而切口的引入会引起一系列力学效应。本文基于以PP为例的热塑性材料的带V型切口件试样的大量试验，探讨了其强度在切口深度和切口底部圆弧半径变化的情况下的表现，得到了关于该材料的一些缺口敏感性规律的结论。     

横向爆炸载荷下开孔弹性板的应力集中

基于ANSYS 7.0/LS-DYNA程序,对3 m×3 m四边简支、厚度为0.025 m、中心开有0.3 m×0.3 m方孔的弹性板,在下三角爆炸载荷作用下的应力响应进行了分析;利用能量密度时间分布函数(TDFED)确定了动应力集中因子,重点讨论了时间步长和采样时间间隔对计算结果的影响。     

a-Si:H掺杂机理的研究

本文利用CNDO/2量子化学理论方法,对P和B原子在四面体配位的Si₄₆和Sl₄₆H₆₀H₄^*原子集团中置换Si原子前后的原子集团能量和能态分布变化进行了计算.计算结果表明:1)在Si₄₆H₆₀H₄^*原子集团中用P(或B)置换引Si原子后在能隙中明显地出现施主(或受主)态子带,同样在Si_{46相似文献}   

过渡金属钼钒砷杂多化合物的合成与TPR,TPD研究

Seven transition metal molybdovanadoarsenic heteropoly compounds have been synthesized and characterized using IR, UV, TG-DTA, pH potential titration techniques. The molecular formulae of these compounds are pro-posed to be H_xM_yAsMO₁₀V₂O₄₀·zH₂O(x=1～3, y=1,2, M=Cr, Mn, Fe, Co, Ni, Cu, Zn).They are all keggin structure. Surface nature of these compounds have been investigated by temperature programmed desorption and temperature programmed reduction techniques. NH₃-TPD results show that in TPD profiles of the compounds there are two desorption peaks corresponding to weak acid sites of desorption, respectively. Desorbing activativon energy and preexponential factor of weak acid site of desorption for compounds have been calculated. H₂-TPR re-sults show that introducting transtion metal to molybdovanarsenic acid, the reduction peak temperatures of H₂-TPR shift regularly with increasing d electron numbers of transition metals. In addition, Zn and Cu heteropoly com-pounds have yet apparent effect of hydrogen spill over.     

Li^＋／MgO上乙烷氧化脱氢制乙烯的研究（Ⅱ）：催化作用机理

借助ＸＲＤ、ＩＲ、ＴＧ等技术对Ｌｉ＾＋／ＭｇＯ进行了表征，结果表明，酸、碱中心的数目，强度、催化性与Ｌｉ＾＋的添加量相关 ，起酸碱作用的表面金属离子、表面低配位氧集团、Ｏ（Ｌ ｉ＾＋Ｏ＾－）是其反应的活性物种，反应机理可能由离子基、游离基协同完成。     

铜基甲醇合成催化剂TPR导数谱

铜基甲醇合成催化剂ＴＰＲ导数谱胡云行，万惠霖，蔡启瑞（厦门大学化学系，固体表面物理化学国家重要实验室，厦门，３６１００５）关键词ＴＰＲ，导数谱，铜基催化剂ＴＰＲ是非稳态条件下研究催化剂的有效方法。该法具有设备简单、快速和信息量大等特点，已成为常用的催...     

纳米碳酸锌的制备和热分解动力学参数的测定

Nanosized zinc carbonate was prepared in the droplet of nano-reactor based on microemusion. The influences of the concentration of the surfactant and reactant on the diameter of nanoparticles were studied and the kinetic pa-rameters of thermal decomposition reaction were determined. It can be shown from experimental results， the di-ameter of the droplet in the microemulsion which have dissolved reactant zinc nitrate and sal volatile is between 4.9nm and 7.7nm， 6.2nm and 12.4nm， respectively. Nanosized zinc carbonate prepared by the method of mi-croemusion has shown good dispersion， narrow distribution and light agglomeration. The particle size of nanosized zinc carbonate is between 5nm and 40nm， and its kinetic parameters of thermal decomposition reaction-activation energy E and reaction order n are 110kJ·mol^-1 and 0.9， respectively.