鉴定中药所用TLC溶剂系统的选择

本文研究了鉴定中药所用ＴＬＣ溶剂系统的选择．通过实验从３０种溶剂系统中选出鉴定１２种中药的行之有效的７种溶剂系统，并分别给出其Ｒ＿ｆ值，为鉴定中药的未知化合物提供了依据．     

基于J2EE体系结构实现网上购物系统

J2 EE体系结构采用组件的思想 ,将业务逻辑层从客户、服务器端独立出来 ,从而带来开发、使用和维护的便利 .在分析的基础上 ,给出了一个网上购物系统的设计模型和实现方法 .     

复杂机械系统实用故障诊断原则的研究

在总结现有诊断技术成功应用实例的基础上,提出了一种新的实用诊断原则-“最少试验故障模”原则,对于复杂的机械设备和系统,采用这种新的研究思路有利于降低研究难度,提高研究成果的实用性.还以滑动轴承为例,通过对滑动轴承主要失效形式和机理的分析,说明可将滑动轴承简化为-多输入（多种故障原因）-单输出（接触摩擦）的灰色系统模型,并以滑动轴承各种故障的共同特征-接触摩擦作为滑动轴承故障诊断研究的唯一故障基准模.根据上述研究思路,对静、动载荷工作条件下滑动轴承的故障诊断进行了大量的实验研究.实践表明,提出的诊断原则诊断效率高,实用性强,可借鉴用于许多领域的故障诊断.     

用超磁致伸缩调谐光纤光栅的光分/插复用器

提出并研究了一种新型多信道切换的全光分/插复用器,它主要由光纤Bragg光栅(FBG)和一对光环行器组成.采用了一种高效的超磁致伸缩材料(GMM)使FBG产生有效的Bragg波长偏移.用控制电流来调控FBG的应变和Bragg波长偏移.用4只相同的FBG与波长叠加技术相结合,可建立能提供15种不同下路信道方式的OADM.     

《墨经》中的语用学浅探

目前，研究《墨经》中的语言逻辑，尤其是语用学，有一定的现实价值。《墨经》中的语用学主要考虑语境对语义的影响，研究语境如时空、可能性、认知关系等对语性结构、语义的影响。     

Polymerization of cyclopentadiene initiated by methylaluminoxane

The polymerization of cyclopentadiene (CPD) was effectively initiated by methylaluminoxane (MAO) to generate poly(cyclopentadiene) (polyCPD). The effects on the polymerization of some reaction parameters such as the monomer concentration, the initiator concentration, and solvents were investigated. The conversion of CPD was monitored with gas chromatography to investigate the reaction kinetics. The polymerization rate was proportional to the concentrations of MAO in the first order and of the CPD monomer in the second order, and a reasonable cationic polymerization mechanism was suggested on the basis of the kinetic study. PolyCPD obtained at a low temperature could be dissolved in toluene or chloroform, and this indicated lower cross‐coupling during the polymerization reaction. ¹H NMR and IR analysis of the polymer indicated that there were almost equal amounts of 1,2‐enchainment and 1,4‐enchainment in the polymer chain. The measurement of polyCPD showed its unique properties as a potential candidate for stable wrappings or electronic packaging materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 264–272, 2006     

A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

Rational Homotopy Theory and Nonnegative Curvature

in this note, we answer positively a question by Belegradek and Kapovitch about the relation between rational homotopy theory and a problem in Riemannian geometry which asks that total spaces of which vector bundles over compact non-negative curved manifolds admit （complete） metrics with non-negative curvature.     

利用低能质子束产生高强度放射性束流

加拿大TRIUMF实验室利用¹¹C成功验证了一种产生高强度(～10⁸ions/s)放射性束流的方法. 该方法不同于普通在线同位素分离方法, 它利用了13MeV的低能强流质子束, 可以产生一系列核天体物理实验感兴趣的高强度放射性束流.