Enhanced mobility and environmental stability in all organic field‐effect transistors: The role of high dipole moment solvent

Low‐operating voltage, high mobility, and stable organic field‐effect transistors (OFETs) using polymeric dielectrics such as pristine poly(4‐vinyl phenol) (PVP) and poly(methyl methacrylate) (PMMA), dissolved in solvents of high dipole moment, have been achieved. High dipole moment solvents such as propylene carbonate and dimethyl sulfoxide used for dissolving the polymer dielectric enhance the charge carrier mobilities by three orders of magnitude in pentacene OFETs compared with low dipole moment solvents. Fast switching circuits with patterned gate PVP‐based pentacene OFETs demonstrated a switching frequency of 75 kHz at input voltages of |5 V|. The frequency response of the OFETs is attributed to a high degree of dipolar‐order in dielectric films obtained from high‐polarity solvents and the resulting energetically ordered landscape for transport. Remarkably, these pentacene‐based OFETs exhibited high stability under bias stress and in air with negligible shifts in the threshold voltage. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1533–1542     

热管输油最佳参数计算方法研究

针对油气储运中稠油输送的热输效应问题,讨论了热管输油的最佳方法及其选择,指出了热管输油最佳方法应该具备的两个"最低"条件,分析了输油站与加热站的温压、平衡及费用变化方程,提出了热管输油的最佳算法,总结了热管输油的最佳工况,讨论了热管输油的经济效益,对稠油的开采与传送及油气经济学具有重要指导意义。     

新疆汉、维、蒙、柯等四民族中小学生体质动态变化分析及对策

针对我国各民族学生体质下降的严峻现实,文章运用文献资料、专家访谈和综合分析等研究方法对新疆汉、维吾尔、蒙古、柯尔克孜等民族中小学生从2000年到2005年期间的体质动态变化情况进行分析,并从社会、教育体制、学校、家庭、学生、宗教信仰等多维角度深入探究体质下降趋势的原因,旨在为有关部门制定新疆学校体育发展规划提供科学依据和建议。     

On Weakly Periodic-Like Rings and Commutativity

A well-known theorm of Jacobson asserts that a ring R with the property that for every x in R there exists an integer n(x) > 1 such that x^n(x) = x is necessarily commutative. With this as motivation, we define an N₀-ring to be a ring which satisfies a weaker hypothesis than the “x^n(x) = x” condition in Jacobson’s Theorem. We consider commutativity of N₀-rings, usually with the additional hypothesis that the ground ring is also weakly periodic-like.     

Purification of transferrin by magnetic immunoaffinity beads

Immunoaffinity adsorbent for transferrin (Tf) purification was prepared by immobilizing anti‐transferrin (Anti‐Tf) antibody on magnetic monosizepoly(glycidyl methacrylate) beads, which were synthesized by dispersion polymerization technique in the presence of Fe₃O₄nanopowder and obtained with an average size of 2.0 μm. The magnetic poly(glycidyl methacrylate) (mPGMA) beads were characterized by Fourier transform infrared spectroscopy, swelling tests, scanning electron microscopy, electron spin resonance spectroscopy, thermogravimetric analysis and zeta sizing analysis. The density and swelling ratio of the beads were 1.08 g/cm³ and 52%, respectively. Anti‐Tf molecules were covalently coupled through epoxy groups of mPGMA. Optimum binding of anti‐Tf was 2.0 mg/g. Optimum Tf binding from aqueous Tf solutions was determined as 1.65 mg/g at pH 6.0 and initial Tf concentration of 1.0 mg/mL. There was no remarkable loss in the Tf adsorption capacity of immunoaffinity beads after five adsorption–desorption cycles. Tf adsorption from artificial plasma was also investigated and the purity of the Tf molecules was shown with gel electrophoresis studies.     

Triazine herbicide imprinted monolithic column for capillary electrochromatography

Trietazine was selectively separated from aqueous solution containing the competitor molecule cyanazine, which is similar in size and shape to the template molecule. Structural features of the molecularly imprinted column were figured out by SEM. The influence of the mobile‐phase composition, applied electrical field, and pH of the mobile phase on the recognition of trietazine by the imprinted monolithic polymer has been evaluated, and the imprint effect in the trietazine‐imprinted monolithic polymer was demonstrated by an imprinting factor. The optimized monolithic column resulted in separation of trietazine from a structurally related competitor molecule, cyanazine. In addition, fast separation was obtained within 6 min by applying higher electrical field, with the electrophoretic mobility of 2.97 × 10^?8 m²V^?1s^?1 at pH 11.0.     

结合àtrous算法与Retinex算法的医学图像增强

提出结合àtrous算法与Retinex算法的医学图像增强.方法在二进小波理论基础上,利用推广的二维àtrous算法对医学图像进行处理,对经过多级分解后的医学图像的低频利用连续非线性函数增强,而对分解后的多个高频采用改进的Retinex算法进行增强;最后,对增强后的低频和高频进行重构.经过反复仿真试验结果表明:方法在去除噪声的同时更好地保留了图像边缘特征,增强了图像细节信息和凸显图像的轮廓,并克服对比度下降的不足,较好地去除光晕现象,视觉效果好,层次感更丰富.     

Monosize microbeads for pseudo-affinity adsorption of human insulin

Affinity adsorption technique is increasingly used for protein purification, separation and other biochemical applications. Therapeutic molecules such as antibodies, cytokines, therapeutic DNA and plasma proteins must be purified before characterization and utilization. The aim of this study was to prepare micronsized spherical polymeric beads and to investigate the extent of their human insulin adsorption capability. Monosize poly(ethylene glycol dimethacrylate-N-methacryloyl-(L)-histidine) [poly(EDMA-MAH)] beads were prepared by modified suspension copolymerization. Functional monomer (MAH) was synthesized using methacryloyl chloride and L-histidine. The beads were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, swelling test and elemental analysis. MAH incorporation into monosize polymeric beads, having an average size around 2-3 μm, was estimated as 55.3 μmol MAH/g bead. Equilibrium swelling ratios of poly(EDMA-MAH) and poly(EDMA) beads were 65% and 55%, respectively. Adsorption experiments were performed under different conditions (i.e., pH, temperature, protein concentration and ionic strength). It was found that adsorption characteristics are strongly depend on these conditions. Maximum insulin adsorption capacity was achieved as 24.7 mg insulin/g poly(EDMA-MAH) beads. Results were well fitted to the Langmuir isotherm model. Compared with poly(EDMA-MAH), nonspecific insulin adsorption onto poly(EDMA) beads was very low (0.61 mg insulin/g bead) and can be negligible. It was observed that insulin could be repeatedly adsorbed and desorbed (at least 10 times) without significant loss in adsorption capacity.     

Interaction energy‐based drug–receptor interaction study of metal–bicyclam complexes

Bicyclams inhibit HIV replication by binding to the CXCR4 chemokine receptor, which is the main coreceptor for gp120 used by X4, T‐tropic strains of HIV for membrane fusion and cell entry. Bicyclam AMD3100 mainly interacts with the aspartic acid residues namely Asp171 and Asp262, which are located at the extracellular ends in the CXCR4 coreceptor. Incorporation of some metal ions by the macrocyclic rings of bicyclam enhances its binding affinity to the CXCR4 receptor and enhances their anti‐HIV activity because the acetate can make a strong coordination bond to the metal and one weaker hydrogen bond to nitrogen in the cyclam ring. The interaction energy (E_int) between 150 metal–bicyclam complexes and aspartic acid has been evaluated. The metal–bicyclam complexes are obtained by the incorporation of six metal ions namely Fe³⁺, Co³⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Pd²⁺ in 25 well‐known bicyclams including AMD3100. In most of the cases, Fe and Co–bicyclam complexes interact best with aspartic acid. The anti‐HIV activity of metal–bicyclam complexes can be predicted on the basis of interaction energy before the synthesis of the metal–bicyclam complex. On the basis of interaction energy, the anti‐HIV activity of bicyclam complexes can be predicted in advance to their synthesis. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011