模型优适度辨识含水层补给进口的原理、方法和应用

本文阐述了一种新的研究成果——用模型优适度寻找含水层主进水口位置的原理、方法和应用。模型优适度作为衡量地下水模型场势与原型(矿区)场势相似拟合程度的量度,它凭借含水层地下水场势对源点的响应差异,判别模型源点位置与原型源点位置是否一致、接近或偏离。本文给出了模型优适度的计算公式和用统计分析方法对动态矩阵施行标准化的公式推演过程。通过多次模拟试验,绘出优适度的等值线图,为华北某矿圈定含水层补给范围,进行注浆堵水,大大地降低了矿井涌水量,在实践应用中获得初步成功。     

莱科萨斯意欲何为

自从莱科萨斯偷偷进入中国以来．便和高额加盟费用、电子商务，甚至变相传销联系在一起。一直游走在市场门外的莱科萨斯．做好迎接直销市场开放的准备了么？[编者按]     

两亲性嵌段聚合物的同步辐射小角x射线散射研究

应用同步辐射小角x射线散射(SAXS)方法研究了不同聚合条件下苯乙烯对乙烯基苯甲酸两亲性嵌段聚合物的聚集行为,结果发现该聚合物在选择性溶液中自组装形成胶束.胶束的形态和结构取决于嵌段聚合物的组成、浓度以及溶剂的性质等因素 关键词： 小角x射线散射 两亲性嵌段聚合物 分形维数 粒径     

A Movable-Cavity Cold Atom Space Clock

We present an experimental scheme of a cold atom space clock with a movable cavity. By using a single microwave cavity, we find that the clock has a significant advantage, i.e. the longitudinal cavity phase shift is eliminated. A theoretical analysis has been carried out in terms of the relation between the atomic transition probability and the velocity of the moving cavity by taking into account the velocity distribution of cold atoms. The requirements for the microwave power and its stability for atomic π/2 excitation at different moving velocities of the cavity lead to the determination of the proper working parameters of the rubidium clock in frequency accuracy 10^-17. Finally, the mechanical stability for the scheme is analysed and the ways of solving the possible mechanical instability of the device are proposed.     

束流线性耦合效应的初步研究

在储存环的束流传输系统中,斜四极场和纵向螺线管场是引起束流线性耦合的主要原因.由于这种耦合,使得束流的幅度和发射度发生交换,引起束流横向包络的增大,严重的将造成束流损失.从Betatron运动方程出发研究了斜四极场和螺线管场存在时束流的幅度耦合效应,分析了斜四极场存在时束流发射度的变化.     

Self-assembly behaviour of amphiphilic diblock copolymer in selective solvents studied by synchrotron small-angle x-ray scattering

The aggregation behaviour of styrene-vinyl benzoic acid (PSm-b-PVBAn) amphiphilic diblock copolymers in selective solvents with different m and n was investigated by synchrotron small-angle x-ray scattering (SAXS). We have carried out a detailed analysis of scattering intensity, dimension, shape and microstructure of the diblock copolymers of narrow distribution in water, methanol, ethanol and isopropanol selective solvents, respectively. We have found that the aggregation behaviour of the copolymer depends on the nature of the solvent and the micelle forms fiat disc objects with the ratio of radius ω=0.4. The average radius gyration Rg of the copolymer decreases as solvents change from isopropanol to ethanol and to methanol, and increases with increasing pH in aqueous solution, but decreases with the addition of COCl2 in ethanol solvent. The scattering intensity of diblock copolymer micelle follows I(h) ∝ h^-α in different selective solutions, suggesting that the PSm-b-PVBAn coils have self-similar structure behaviour or a fractal structure in the selective solvents. All of these revealed that the aggregation behaviour of the diblock copolymer changes dramatically with experimental condition in the selective solvent. The increase of mass fractal dimension (Dm) from 2.12 to 2.47 indicates that the copolymer chain changes from a swollen coil to a rather compact disc in the course of changing solvents, decreasing surface fractal dimension (Ds) from 2.98 to 2.58 indicates that the copolymer micelle change from a rather rough surface to a smooth form in the course of increasing pH in aqueous solutions, and increasing Dm and Ds from 2.29 to 2.35 and 2.70 to 2.90, respectively, indicates the shrinkage of copolymer micelle to a rather compact and rough disc form by adding COCl2 in ethanol solvents.     

基于悬臂梁调谐技术的光纤光栅无源振动监测

采用匹配光纤光栅设计了一种结构简单的振动信号无源监测装置.该装置利用悬臂梁调谐技术能够将微小振动信号转化为光电探测器可探测的光强信号,利用示波器实现实时监测.实验中对振幅为3mm的简谐振动信号进行了监测,测量结果与振动频率一致,可测量7～20Hz的振动,信噪比不低于14.9dB.监测频率受限是因为悬臂梁的性质,如采用金属材料或者采用齿轮组对转子进行减速,该装置可探测更高的频率.     

机器人头部的视觉跟踪系统研究

对运动目标进行识别和跟踪是机器人视觉的一项关键技术。提出了一种可以快速跟踪运动目标的系统设计方案,采用了双计算机处理和Memolink通信方式的机器人控制结构,以图像处理为基础,在图像经过校正之后,通过区域分割和目标识别两个步骤来确定目标的位置,并控制机器人对目标进行跟踪。实验表明,该方法具有较高的速度和准确性。     

向列液晶表面弹性能K13项的物理效应及检验方法

通过解析推导和数值计算的方法，得到了平衡态指向矢满足的微分方程和边界条件.研究了表面弹性能K13项对磁场作用下的弱锚定向列液晶盒Fréedericksz转变性质的影响.结果表明，表面弹性能K13项的存在对液晶系统的自由能有很大的影响，从而改变转变的性质，诱导液晶盒在阈值点发生一级Fréedericksz转变.给出了发生一级转变的物理条件，它除了与液晶的结构和材料有关外，还依赖于液晶表面弹性能K13项，同时给出了由此判断K13项是否存在的检验方法. 关键词： 表面弹性能K13项 弱锚定 Fréedericksz转变     

Development of Full Automatic External Welding Machine for Annular Welds of Pipeline

To meet the demands of rapid development of pipeline constructions in China, a complete set of full automatic external welding machine for annular welds of pipeline and welding procedure have been developed thereof. The system has been applied in the “West-East Pipeline Project” and its performance is proven. With this welding machine the welding parameters can be either preset before or adjusted in real time during the welding process, which avoids the blemishes of same type domestic and international products. Thus it is best propitious to in-situ construction conditions and workers‘ technical level in China. In this article the development of mechanical and control systems of this product is introduced and typical welding procedure parameters are provided.