用四叉事例样本确定J/ψ总数

详细介绍了用J/ψ衰变中的四叉事例样本确定J/ψ总数的方法,并用此方法确定了北京谱仪从1999年11月到2001年5月所收集的两批J/ψ数据的事例总数,分别为(27.00±1.48)×10⁶和(30.70±1.62)×10⁶.     

利用可调谐半导体激光光谱技术对含尘气体中NH3的测量

利用可调谐半导体激光吸收光谱技术(TDLAS)并结合波长调制,在近红外波段1531.7nm处对常温常压下的NH3进行浓度测量.在10 m的长程吸收池内得到了25×10-6的浓度信号,并且在25×10-5-400×10-6浓度范围内二次谐波信号与浓度具有良好的线性关系.讨论了粉尘颗粒对于二次谐波信号的干扰,并提出了利用激光强度线性拟合解决颗粒对气体测量干扰的方法.     

The symmetric and antisymmetric superexchange interactions in spin-Peierls system

The influences of Dzyaloshinskii Moriya （DM） interaction and Kaplan-Shekhtman-Entinwohlman-Aharony （KSEA） interaction on the dimerization of a spin-Peierls system are investigated theoretically by using the Lanczos numerical method. The ground state of the spin-Peierls system is still dimerized phase when both of the DM and the KSEA interactions have the same value with Heisenberg interaction. It is found that the KSEA interaction and uniform DM interaction are always against systemic dimerization, but the staggered DM interaction acts in favour of dimerization. Furthermore, the influences of the DM and the KSEA interactions are also studied in terms of the ground state index rate and the energy gap index rate of the dimerized Heisenberg system. The results show that the DM interaction makes the index rates larger, while the KSEA interaction makes them smaller.     

Corkscrew运动影响束流发射度的数值分析

在直线加速器中，始终存在束流质心轴、束流传输管道几何轴、束流聚焦传输磁场磁轴等三轴不一致问题。当束轴与磁轴存在夹角，而且束流脉冲（平顶）期间存在能量差别时，将引起束心的Corkscrew运动。斜入射的束流在轴向磁场中传输时，由于束流脉冲（平顶）期间不可避免的能量差别，导致不同时刻的束片质心螺旋运动的相位不同，在束流到达同一个位置时，不同时刻束片的质心在同一个考察点具有不同的横向位置。束心Corkscrew运动会造成很多不良后果。针对束心Corkscrew运动造成束流积分发射度的增长情况开展数值模拟研究，为采取相应的抑制措施提供参考和依据。     

Collision geometry and particle production in high energy heavy ion collision experiments

An overview of research status of soft physics in high energy heavy-ion collision experiments and recent experimental results are presented. This paper includes four parts: 1) Theoretical predictions of quark-gluon plasma and introduction for high energy heavy ion collision experiments. 2) Experimental status on collision     

Configuration of the valence neutrons of 17B

The reaction cross section of ~(17)B on ~(12)C target at(43.7±2.4)MeV/u has been measured at the Radioactive Ion Beam Line in Lanzhou(RIBLL).The root-mean-square matter radius(R_(rms))was deduced to be(2.92±0.10)fm,while the R_(rms)of the core and the valence neutron distribution are 2.28 fm and 5.98 fm respectively.Assuming a"core plus 2n"structure in ~(17)B,the mixed configuration of(2s_(1/2))and(1d_(1/2))of the valence neutrons is studied and the s-wave spectroscopic factor is found to be(80±21)%.     

红外视景仿真技术及其研究进展

从红外视景仿真技术意义出发，介绍了其所包含的几个基本部分；从目标辐射建模、背景辐射建模和大气建模三方面，总结了国内外红外视景仿真技术发展历程和状况。其中列举了国外多个典型红外视景仿真软件和几个较完善红外辐射模型，并统计了2000年以来国内高校在红外视景仿真方面的研究情况。统计数据表明，多个发达国家的红外视景仿真技术已逐步趋于成熟和产品化，而国内尚未开发出功能较完善的红外视景仿真系统，只能仿真较简单场景。     

聚(2-甲氧基-5-辛氧基)对苯乙炔/TiO2纳米复合材料的光物理性能研究

通过原位强碱诱导下的脱氯化氢缩合聚合法制备了一系列不同纳米TiO2含量的聚(2-甲氧基-5-辛氧基)对苯乙炔/纳米二氧化钛(PMOCOPV/TiO2)光电复合材料。红外光谱和拉曼光谱证实了在纳米TiO2表面的包覆层为PMOCOPV。紫外-可见吸收光谱表明随着TiO2含量的增加PMOCOPV/TiO2纳米复合材料的吸收强度提高。高分辨透射电镜观察发现PMOCOPV/TiO2是具有核-壳结构的纳米复合粒子,直径约30 nm,其中PMOCOPV包覆层的厚度约为8~10 nm。荧光光谱研究表明,PMOCOPV/TiO2纳米复合材料的最大发射波长随着TiO2含量的增加发生红移,荧光寿命约为1 ns,且随着TiO2含量的增加荧光强度和荧光寿命得到显著提高,并通过PMOCOPV/TiO2纳米复合材料中的激子离化和电荷传输过程以及复合材料中的电势能级探讨了PMOCOPV/TiO2的荧光量子效率和荧光强度增加的机理。     

40Ar+238U 实验介绍

主要介绍了利用兰州重离子加速器提供的270 MeV的40Ar离子束轰击238U靶，通过熔合蒸发反应进行试合成Z=110附近的新同位素的实验情况。分析了目前关于超重核研究的现状并描述了这次实验的目的、 可行性分析、 实验装置以及实验过程等。本次实验仍然用氦喷嘴技术对产物进行传输， 并用一套具有数对探测器组的转轮收集探测系统对产物进行收集和测量。 The state of the experiment to produce the new isotopes around Z=110 are presented in this paper. The emphasis is laid upon introducing the experiment purpose, the set up and the feasibility for producing this objective nuclide. In the experiment the new isotopes were produced by the complete fusion evaporation reaction of 238U with 270 MeV 40Ar at the Sector Focus Cyclotron (SFC) of Heavy Ion Research Facility in Lanzhou(HIRFL). The reaction products were also transported and collected by using the helium jet technique and rotating wheel apparatus.     

Application of Electron-Shelving Detection via 423 nm Transition in Calcium-Beam Optical Frequency Standard

A new scheme of small compact optical frequency standard based on thermal calcium beam with application of 423 nm shelving detection and sharp-angle velocity selection detection is proposed. Combining these presented techniques, we conclude that a small compact optical frequency standard based on thermal calcium beam will outperform the commercial caesium-beam microwave dock, like the 5071 Cs clock （from Hp to Agilent, now Symmetricom company）, both in accuracy and stability.