Ni^2＋：LiNbO3的光学吸收谱和EPR的研究

应用三角晶场中d^2(d^8)电子组态的包括静电相互作用和自旋－轨道耦合相综合利用物强场能量矩阵,采用完全对角化方法,精确地计算了具有C3V对称的Ni^2 :LiNbO3的光学吸收谱和EPR谱。理论结果与实验值符合得很好。     

光指针式微小位移测量仪

光指针式微小位移测量仪巧用光路将微小的位移量放大,从光指针终端的标度盘上可以直接读取实际的位移数值.     

(EuxRE1-x)(β-NTA)3Phen配合物的合成、表征及荧光性能研究

在无水乙醇溶液中合成了以铕及铕掺人不同比例的Y2 或Tb3 为中心,以β萘基甲酰三氟丙酮(β-NTA)和邻菲咯啉(phen)为配体的配合物;对其进行了元素分析、摩尔电导、核磁共振氢谱、差热-热重、红外光谱分析及荧光性能的研究.其化学组成式为(EuxY1-x)(β-NTA)3 PJlen及(EuxTb1-x)(p-NTA)3Phen(x=0.1;0.3;0.5;0.7;0.9);摩尔电导测试数据表明,所有配合物均为非电解质;核磁共振氢谱和红外光谱表明,配体β-NTA通过烯醇式氧负离子采用双齿配位的形式与稀土离子配位,Phen的两个氮原子也与稀土离子双齿配位;荧光光谱实验结果表明,所有激发光谱都为一宽带峰,配体能很好的吸收能量,在惰性不发光Y3 的含量工小于0.3,发光Tb3 的含量小于0.5时,可以使Eu3 的特征荧光发射得到一定程度增强,这表明两种不同的离子都可以敏化Eu3 .     

Thermal analysis of GaN-based laser diode mini-array

Thermal characteristics of multiple laser stripes integrated into one chip is investigated theoretically in this paper. The temperature pattern of the laser diode mini-array packaged in a TO-can is analyzed and optimized to achieve a uniform temperature distribution among the laser stripes and along the cavity direction. The temperature among the laser stripes varies by more than 5 K if the stripes are equally arranged, and can be reduced to less than 0.4 K if proper arrangement is designed. For conventional submount structure, the temperature variation along the cavity direction is as high as 7 K, while for an optimized trapezoid submount structure, the temperature varies only within 0.5 K.     

γ-辐照对纯Y_2SiO_5和Eu~(3+)∶Y_2SiO_5晶体光谱性能的影响

研究了γ-辐照前后纯Y2SiO5和Eu3+掺杂的Y2SiO5晶体吸收光谱的变化,辐照后,未退火和氢气退火的纯Y2SiO5晶体在260~270 nm和320 nm波段产生了附加吸收峰,分别是由F心和O-心的吸收引起的;经过空气退火的纯YSO晶体中,由于消除了氧空位,因此辐照后没有出现色心吸收峰。在Eu3+∶Y2SiO5晶体中,不但有相同的F心和O-心吸收峰,而且还有Eu2+离子在300 nm和390 nm的吸收峰。随着辐照剂量的增加,色心附加吸收峰增强。空气退火能减少Eu3+∶Y2SiO5晶体中的色心,而氢气退火能增加色心。     

含纳米棒银溶胶的制备及其光谱性质研究

以CTAB表面活性剂胶束为模板用化学还原法制备出含有银纳米棒的银胶体,用透射电镜(TEM)对颗 粒形貌进行了表征.UV Vis吸收谱显示,含银纳米棒溶胶有两个吸收蜂,其中长波长吸收峰位置随胶粒长径比增 加迅速红移和宽化.用多尺寸统计平均的Mie散射模型计算了纳米棒银胶体的吸收谱,较好地解释了长波长吸收 峰的宽化.以此胶体为衬底材料,测量了染料分子的表面增强拉曼散射(SERS),结果显示,SERS强度随胶体中 所含纳米棒长径比的增加呈现先显著增强后缓慢减弱的变化规律,用电磁增强理论对有关现象进行了分析.     

Hydrodynamic Properties of Fe3O4 Kerosene-Based Ferrofluids with Narrow Particle Size Distribution

We investigate the hydrodynamic properties of Fe3O4 kerosene-based ferrofluids with narrow particle size distribution. The ferrofluids are synthesized by improving chemical coprecipitation technique. A narrow distribution of 8.6-10.8nm particle sizes is obtained from the magnetization curve with the free-form model based on the Bayesian inference theory. The fitting result is consistent with average particle size obtained from x-ray diffraction. With the increase of applied magnetic field and magnetic particle concentration, apparent viscosity of ferrofluids increases. At concentration 4.04%, the type of flow for the ferrofluid transforms from Newtonian to Bingham plastic fluid as the applied magnetic field increases.     

两种气液两相流模型的应用和比较

本文应用MUSIG模型[1]和均一直径模型对某溶液堆台架模型堆芯内气液流动传热进行了数值模拟.在MUSIG模型中堆芯内离散相气泡被分为5组不同直径的气泡,用于分析堆芯内气泡的流动变化和大小分布,采用Luo and Svendsen[2]和Prince and Blanch[3]模型描述不同直径气泡组间的破裂和聚合.在均一直径模型中,堆芯内的气体被考虑为同一直径的组分,并且不考虑其破裂与聚合现象.计算得到采用两个模型的模拟结果并且对其进行了对比研究.结果显示应用MUSIG模型的计算结果与台架实验结果吻合更好.     

The effects of sapphire nitridation on GaN growth by metalorganic chemical vapour deposition

In situ optical reflectivity measurements are employed to monitor the GaN epilayer growth process above a low-temperature GaN buffer layer on a c-plane sapphire substrate by metalorganic chemical vapour deposition. It is found that the lateral growth of the GaN islands and their coalescence are promoted in the initial growth stage if optimized nitridation time and temperature are selected when the substrate is pre-exposed to ammonia. As confirmed by atomic force microscopy observations, the quality of the GaN epilayers is closely dependent on the surface morphology of the nitridated buffer layer, especially grain size and nucleation density.     

符合计数在钚的属性测量中的应用研究

中子符合计数在核材料认证和管理中有着广泛的应用．系统阐述了中子符合计数的基本原理,对“点模型”公式作了推导．利用MCNP4B程序实现了中子符合计数的数值模拟.Neutron coincidence counting is widely used in the authentication and management of nuclear material. The basic principles of coincidence counting and the derivation of "point model" formulae of "point model" are introduced in this paper. The numerical simulation of the coincidence counting is implemented by use of the MCNP4B package.