次谐波聚束系统固态放大器相位特性

 为研究BEPCⅡ直线加速器次谐波聚束系统使用的两台固态放大器（20 kW/142.8 MHz,10 kW/571.2 MHz）的相位特性,利用基于现场可编程门阵列(FPGA)的数字测量方法对两台固态放大器的脉内相移和相位稳定度进行了测量。测量系统硬件包括频率综合器、FPGA数字信号处理板和PC;软件部分包括FPGA内部算法、通信及PC端界面程序。该测量系统能真实地反映两台固态放大器的相位特性,为次谐波聚束器的相位补偿提供了参考。     

Investigation on the fabrication of the 3rd harmonic superconducting cavity for the SSRF storage ring

A third harmonic superconducting niobium cavity has been proposed for installation in the Shanghai Synchrotron Radiation Facility （SSRF） storage ring to improve the Touschek lifetime. In order to investigate the feasibility of the superconducting cavity fabrication indigenously and the possibility to master the fabrica tion techniques, cavities were fabricated from copper and niobium sheets by deep drawing and electron-beam welding, and a series of measurements, such as resonant frequency, shape dimensions and wall thickness, were carried out during this process. After analysis of various problems existing in the fabrication process, technique improvements were proposed, and finally the precise shape as designed and resonant frequency within 1.2 MHz were achieved for the new completed cavities. In addition, full annealing was finally proved to be a good cure for niobium sheets＇ tearing up during deep drawing. By fabricating niobium cavities successfully, some problems to the next step were cleared. This paper introduces the process of cavity fabrication and its technique improvements towards forming, and the initial vertical test result of niobium cavity is also presented.     

Octet baryon masses with two-gluon exchange effect

We report our investigation on the octet baryon spectrum in the nonrelativistic quark model by taking into account the two-gluon exchange effect. The calculated octet baryon masses agree better with the experimental data. It is also shown that the two-gluon exchange interactions bring a significant correction to the Gell-Mann-Okubo mass formula.     

A Diode-Side-Pumped Dynamic Fundamental Mode Nd：YAG Laser

A fundamental mode Nd：YAG laser is experimentally demonstrated with a stagger pumped laser module and a special resonator. The rod is pumped symmetrically by staggered bar modules. A dynamic fundamental mode is achieved with the special resonator under different pump levels. A maximal continuous wave output of 61 W （M^2 = 1.4） is achieved with a single rod. An average output of 47 W, pulse width of 54 ns, pulse energy of 4.7 mJ and peak power of 87kW are obtained under the Q-switched operation of 10 kHz.     

含氢添加剂对合成cBN的影响及腔体温度分布

 通过对Li基触媒下立方氮化硼的高温高压合成实验结果的分析,研究了在Li基触媒作为主要触媒及氢化物作为添加剂的环境下,立方氮化硼的生长情况。同时由合成后样品中立方氮化硼的生成区域对V型生长区温度梯度分布进行了分析讨论。     

ICP-AES测定高纯碲中11种杂质元素

电感耦合等离子体原子发射光谱法 (ICP- AES)同时测定高纯碲中 11种杂质元素。用离峰扣背景法消除背景干扰 ,检出限能满足高纯碲中杂质元素的测定要求 ,加标回收率在 94 .0 %— 10 8%之间。     

ICP-AES测定工业用氢氧化钠中Fe、Si、Ca和Mg

电感耦合等离子体-原子发射光谱法(ICP-AES)同时测定了工业用氢氧化钠中Fe、Si、Ca、Mg,探讨了功率对测定结果的影响,用离峰扣背景法消除背景干扰,用基体校正系数消除基体干扰,加标回收率在97.9%—105%之间。     

硫酸铵-溴化钾-乙醇体系萃取分离金

研究了(NH4)2SO4存在下,KBr-乙醇体系萃取分离Au(Ⅲ）的行为。实验表明,Br^-与Au(Ⅲ）形成的AuBr4^-很容易被萃取到乙醇相中。当溶液中KBr、(NH4)2SO4和无水乙醇浓度分别为0．04g／mL、0．30g／mL、30％(V／V),pH=2—4时能使Au(Ⅲ）的萃取率达到100％,Al（Ⅲ）、Ni(Ⅱ)、Mn(Ⅱ)、Cr（Ⅲ）、Co(Ⅱ)、Fe（Ⅲ）、Zn(Ⅱ)、Cu(Ⅱ)、Mo（Ⅵ)、U(Ⅳ)基本不被萃取,实现了Au（Ⅲ）与上述离子的分离。     

苯胺和环氧丙烷共聚物电催化氧化甲酸

 采用循环伏安法制备了苯胺和环氧丙烷导电高分子共聚物(PAN-PPO)电极,研究了其对甲酸氧化的电催化性能. 结果表明,PAN-PPO对甲酸氧化具有较高的催化活性,其催化性能稳定. 研究了PAN-PPO电催化甲酸氧化的动力学特征. 结果表明,甲酸在PAN-PPO上可能直接经电催化氧化生成CO2,此反应受液相扩散控制,扩散系数为1.32×10-7 cm2/s,反应级数为1.     

运动介质中电磁波的能流密度

利用电磁场变换,讨论了运动介质中一列平面单色电磁波的能流密度给出超光速情形下电磁波及介质的性质。结果表明,随着介质运动速度的增加,电磁波能流密度方向可发生突变。