In Situ Observation of Skeletal Shape Transition during BaB2O4 Crystal Growth in High-Temperature Solution

The transition from a fiat solid-liquid interface to a skeletal shape during BaB2O4 （BBO） single crystal growth in Li2B4O7 flux is observed in real time by an optical high-temperature in-situ observation system. The movement of crystal step is also investigated. The observation results demonstrate that the steps propagate along and parallel to the fiat interface when the crystal size is small. Nevertheless, they will ‘bend＇ close to the face centre if the crystal size becomes greater. Atomic force microscopy reveals that more deposition places near the face centre give rise to the bending of advancing steps and thus the formation of a vicinal interface structure. Measurements of step velocity show that the velocity keeps nearly constant at different moments for one specific step, whereas the step on a newly formed layer advanced faster than that on a previously formed one when the crystal size is larger than 210μm or so. Thus interracial morphological instability occurs and a skeletal interface is obtained.     

Annealing effects on the microwave permittivity and permeability properties of Fe79Si16B5 microwires and their micowave absorption performances

This paper reports that amorphous magnetic microwires(Fe79Si16B5) have been fabricated by a melt-extraction technique and have been annealed at 600°C and 750°C respectively.Differential scanning calorimeter measurements show that nanocrystalline magnetic phase(α-Fe) has been formed in the amorphous matrix when it was annealed at 600°C.Hard magnetic phase(Fe2B) was formed in the microwires annealed at 750°C,which increases the magnetic coercivity.Microwave permittivity and permeability are found to be dependent on the microstructures.The permittivity fitting results show that multi Lorentzian dispersion processes exist.For microwires annealed at 750°C,their resonance peaks due to the domain wall movements and natural resonance are found higher than those of microwires annealed at 600°C.The microwave absorption performance of microwires annealed at 600°C is found better than microwires annealed at 750°C.     

碳纳米管阵列水渗透性质的研究

碳纳米管阵列组成的碳纳米管分子膜在生物学分子器件等方面有重要应用. 本文利用分子动力学方法计算研究水分子对(11, 11)碳纳米管阵列的渗透过程. 结果发现, 只有当阵列间隙面积大于57.91 Ų时, 水分子才能进入阵列间隙中, 并揭示了碳管内部、阵列间隙内水分子结构随相邻碳管间距变化的演化趋势以及管内外水分子电偶极矩的分布特性.     

基于循环码的常重复合码的构造

研究给出了一类基于循环码的常重复合码的构造,并利用指数和计算其参数.与相关的常重复合码相比,该码具有更多的码字,且渐近性较好.     

基于MCPT解法器库的专用辐射探测模拟软件研发与应用北大核心CSCD

甲状腺内^(131)I放射性活度与辐射探测结果的比例关系与甲状腺几何尺寸、探测距离等因素相关,是估算甲状腺内^(131)I含量与其可能造成的辐照损伤的关键参数。基于MCPT辐射输运数值模拟算法器库开发了用于开展NaI探测器伽马辐射测量模拟的应用程序,进而建立了多组具有不同容积的甲状腺型容器和不同探测距离的物理模型,最终通过蒙特卡罗数值计算得到了不同测量状态下探测器的探测效率。在甲状腺型容器与探测器距离较远时,数值模拟给出的结果与理论计算结果一致,证明此应用程序可用于定量分析NaI的探测效率。数值模拟结果表明,小距离模型的结果受甲状腺样容器的大小和距离的显著影响,模拟给出的探测效率表为开展深入细致的实验研究奠定了基础。     

基于DenseNet的散射成像景深拓展研究

针对拼接干涉测量技术除了引入拼接误差,还将引入机械运动误差的问题,为此提出一种X射线反射镜的非零位干涉测量方法,无需拼接便可实现零回程误差的高精度干涉测量。利用一块高精度平面镜来标定干涉系统在全视场范围内的回程误差。通过将待测非球面镜划分成多个子孔径,每个子孔径可近似看作一个平面,这样可以从标定数据库中找到该子孔径所对应的回程误差,通过简单的矩阵拼接可得到整个待测非球面镜的回程误差。以X射线椭圆柱面反射镜为例进行实验,实现X射线椭圆柱面反射镜非零位干涉测量面形的回程误差有效标定,相比于拼接干涉测量方法二者结果一致性较好,证实所提方法的正确性。     

非微扰QCD真空中夸克真空凝聚的结构(英文)

基于Dyson-Schwinger方程(DSEs)所确定的夸克传播子和算符成积展开(OPE),在彩虹近似下,预言了QCD真空中非定域夸克真空凝聚的结构。这种结构由夸克自能函数Af和Bf决定,通过数值求解DSEs就可以得到这些自能函数。但是,直接数值求解DSEs方程非常复杂,这里采用Roberts和Williams提出的参数化方法,用参数化的夸克传播函数σf v(p2)和σf s(p2)计算夸克自能函数。同时,也计算了定域的夸克真空凝聚值,夸克胶子混合的真空凝聚值,以及夸克的虚度。理论预言和计算结果均与标准QCD求和定则、格点QCD和瞬子模型的理论结果大致相符。和这些模型的结果相比,参数化方法得到的轻夸克(u,d,s)的定域真空凝聚偏大,这主要是由于模型依赖导致的。与u,d夸克相比,s夸克的真空凝聚比较大,这是因为s夸克自身质量较大的缘故。当然,Roberts-Williams参数化的夸克传播子只是一个经验公式,只能近似描述夸克的传播。     

(n,n)-(2n, 0)碳纳米管异质结的扭转力学特性

相近直径的锯齿型和扶手椅型碳纳米管可以共轴组合形成5-7碳环交替出现的柱形对称异质结. 本文利用分子动力学方法研究了直径相近且等长锯齿型和扶手椅型碳纳米管形成的(n, n)-(2n, 0)结在扭转过程中的扭矩和轴向应力随扭转角度的变化规律以及应力传递过程. 研究发现, (n, n)-(2n, 0)结扭转应变在达弹性限度内不会产生轴向应力, 该效应对基于碳纳米管扭转特性的纳米振荡器件的设计具有重要意义.     

大学物理课堂演示实验应定位在科学性实验

目前大学物理课堂教学中演示实验通常用于演示物理现象,没有充分发挥出演示实验的作用.本文指 出,演示实验应定位在科学性实验.为此,课堂演示实验的设计要体现出物理的严密性、科学性,在验证理论知识的 同时,让学生也学会科学的分析方法与实验方法.学生应作为大学物理演示实验的主体,参与到演示实验的操作、 数据采集、分析中;教师在课堂教学中主要是提出问题、启发思路和引导争论,充当实验操作员与引导学生的角色.     

Influence of laser mode on splitting beam illumination effect of Dammann grating

The influences of various laser modes on the splitting beam effect of Dammann grating are studied in theory and by numerical simulation. The results show that fundamental mode laser resembles plane wave while high order mode laser differs from plane wave in the splitting beam effect by Dammann grating. Therefore, the fundamental mode laser is more suitable to be the light source to improve the energy efficiency in far-distance image detecting systems, such as laser image ladar, which use Dammann grating in the ilhlmination svstem.