Influence of pH on electrophoretic behavior of phenothiazines and determination of pKa values by capillary zone electrophoresis

The influence of buffer pH on the electrophoretic behavior of 13 structurally related phenothiazines and determination of pK(a) values by capillary zone electrophoresis (CZE) were investigated. The results indicate that phenothiazines with a piperazine substituent behave quite differently from those with substituents having an aliphatic side chain or a piperidine moiety over the pH range studied. To separate these phenothiazines, it is preferable to select buffer pH in the range of 2.5-3.5. The pK(a) values of phenothiazines with three different types of substituents attached at the 10-position of the phenothiazine ring were determined. The determination of pK(a) values of phenothiazines allows us to rationalize the influence of buffer pH on the migration behavior of these compounds in CZE.     

Design, synthesis, and binding affinities of pyrrolinone-based somatostatin mimetics

[structure: see text] Tetrapyrrolinone somatostatin (SRIF) mimetics (cf. 1), based on a heterochiral (D,L-mixed) pyrrolinone scaffold, were designed, synthesized, and evaluated for biological activity. The iterative synthetic sequence, incorporating the requisite functionalized coded and noncoded amino acid side chains, comprised a longest linear synthetic sequence of 23 steps. Binding affinities at two somatostatin receptor subtypes (hsst 4 and 5) reveal micromolar activity, demonstrating that the d,l-mixed pyrrolinone scaffold can be employed to generate functional mimetics of peptide beta-turns.     

A membrane separation technique for optimizing sample preparation of MALDI-TOF MS detection

Here, we report a new method based on the combination of membrane separation technology and nanomaterial to rapid detection of peptides and protein with MALDI-TOF MS. This method shows advantages as it can inhibit the heterogeneous of sample spot and enhance the target molecular signal intensity.     

First-second shell interactions in metal binding sites in proteins: a PDB survey and DFT/CDM calculations

The role of the second shell in the process of metal binding and selectivity in metalloproteins has been elucidated by combining Protein Data Bank (PDB) surveys of Mg, Mn, Ca, and Zn binding sites with density functional theory/continuum dielectric methods (DFT/CDM). Peptide backbone groups were found to be the most common second-shell ligand in Mg, Mn, Ca, and Zn binding sites, followed (in decreasing order) by Asp/Glu, Lys/Arg, Asn/Gln, and Ser/Thr side chains. Aromatic oxygen- or nitrogen-containing side chains (Tyr, His, and Trp) and sulfur-containing side chains (Cys and Met) are seldom found in the second coordination layer. The backbone and Asn/Gln side chain are ubiquitous in the metal second coordination layer as their carbonyl oxygen and amide hydrogen can act as a hydrogen-bond acceptor and donor, respectively, and can therefore partner practically every first-shell ligand. The second most common outer-shell ligand, Asp/Glu, predominantly hydrogen bonds to a metal-bound water or Zn-bound histidine and polarizes the H-O or H-N bond. In certain cases, a second-shell Asp/Glu could affect the protonation state of the metal ligand. It could also energetically stabilize a positively charged metal complex more than a neutral ligand such as the backbone and Asn/Gln side chain. As for the first shell, the second shell is predicted to contribute to the metal selectivity of the binding site by discriminating between metal cations of different ionic radii and coordination geometries. The first-shell-second-shell interaction energies decay rapidly with increasing solvent exposure of the metal binding site. They are less favorable but are of the same order of magnitude as compared to the respective metal-first-shell interaction energies. Altogether, the results indicate that the structure and properties of the second shell are dictated by those of the first layer. The outer shell is apparently designed to stabilize/protect the inner-shell and complement/enhance its properties.     

Development of high-temperature pulsed slit nozzle and its application to supersonic jet absorption spectrometry

A high-temperature pulsed slit nozzle, consisting of a circular pulsed nozzle and an interface to convert a circular flow into a slit flow has been constructed. The absorption spectrum is measured by scanning the wavelength of the monochromator equipped with a xenon arc lamp and by detecting the transmitted light through a jet with a photomultiplier. A rotationally cooled spectrum is clearly observed for aniline only when a long slit nozzle is employed. The absorptivity increases proportionally to the slit length at least up to 6 cm. The time for recording a spectrum is 3.5 min, which is reduced to several seconds by transmitting a white light through a jet and by measuring the spectrum with an optical multichannel analyzer. The detection limit is estimated to a partial vapor pressure of 0.4 torr for aniline. The present system can be conveniently used in routine analysis, because of a wide spectral coverage of the lamp source.     

On the Criteria of Instability for Electrochemical Systems

Both cyclic-voltammetry-based and impedance-based experimental criteria that have been developed recently for the oscillatory electrochemical systems are critically appraised with two typical categories of oscillators.Consistent conclusions can be drawn by the two criteria for the category of oscillators that involve the coupling of charge transfer mainly with surface steps(e.g.ad-and desorption)such as in the electrooxidation of C1 organic molecules.Whereas,impedance-based criterion is not applicable to the category of oscillators that involve the coupling of charge transfer mainly with mass transfer(e.g.diffusion and convection) such as in the Fe(CN)6^3- reduction accompanying periodic hydrogen evolution.The reason is that the negative impedance cannot include the feedback information of convection mass transfer induced by the hydrogen evolution.However,both positive and negative nonlinear feedbacks,i.e., the diffusion-limited depletion and convection-enhanced replenishment of the Fe(CN)6^3- surface concentration,that coexist between the bistability,i.e.,Fe(CN)6^3- reduction with and without hydrogen evolution at lower and higher potential sides respectively,are all reflected in the crossed cyclic voltammogram(CCV).It can be concluded that the voltammetry-based criterion(in time domain)is more intuitive,less time-consuming and has a wider range of applications than the impedancebased one (in frequency domain).     

Study of quasi-monodisperse In2O3 nanocrystals: synthesis and optical determination

In this communication, we report a successful synthesis of quasi-monodisperse In2O3 nanocrystals with high crystallinity in a high-temperature organic solution. The average size of nanocrystals can be tuned using a dynamic injection technique. TEM and XRD investigations indicate that each nanocrystal is a single crystal. The optical determination implies that the photoluminescence behavior of these In2O3 nanocrystals is different from that of the bulk, probably due to the combination of weak quantum-confinement-effects and the nature of high crystallinity in nanocrystals.     

Composition-controlled synthesis of bimetallic gold-silver nanoparticles

This paper reports findings of an investigation of the synthesis of monolayer-capped binary gold-silver (AuAg) bimetallic nanoparticles that is aimed at understanding the control factors governing the formation of the bimetallic compositions. The synthesis of alkanethiolate-capped AuAg nanoparticles was carried out using two related synthetic protocols using aqueous sodium borohydride as a reducing agent. One involves a two-phase reduction of AuCl(4)(-), which is dissolved in organic solution, and Ag(+), which is dissolved in aqueous solution. The other protocol involves a two-phase reduction of AuCl(4)(-) and AgBr(2)(-), both of which are dissolved in the same organic solution. AuAg nanoparticles of 2-3 nm core sizes with different compositions in the range of 0-100% Au have been synthesized. The two synthetic routes were compared in terms of bimetallic composition and size properties. Our new findings have allowed us to establish the correlation between synthetic feeding of metals and metal compositions in the bimetallic nanoparticles, which have important implications to the exploration of gold-based bimetallic nanoparticles for constructing sensing and catalytic nanomaterials.     

Analytical expressions for the electrical potential near planar, cylindrical, and spherical surfaces for symmetric electrolytes

The conjecture of Tuinier (J. Colloid Interface Sci. 258 (2003) 45) for the electrical potentials near a cylindrical surface and near a spherical surface under the conditions of symmetric electrolyte and large scaled radius are derived by solving the corresponding Poisson-Boltzmann equation. The surface charge density-surface potential relations for these surfaces are also derived under the conditions of constant surface potential. We show that the level of surface charge density for planar, cylindrical, and spherical surfaces follows the order spherical surface > cylindrical surface > planar surface.     

Some Properties of Solutions to the Novikov Equation with Weak Dissipation Terms

In this paper, we investigate the Novikov equation with weak dissipation terms. First, we give the local well-posedness and the blow-up scenario. Then, we discuss the global existence of the solutions under certain conditions. After that, on condition that the compactly supported initial data keeps its sign, we prove the infinite propagation speed of our solutions, and establish the large time behavior. Finally, we also elaborate the persistence property of our solutions in weighted Sobolev space.