同轴结构中压力波法测量空间电荷分布的物理模型研究

从压力波法测量平板样本中空间电荷分布的理论分析出发,提出了对于同轴结构的固体电介质中空间电荷分布的压力波法测量的物理模型,并得出了测量电流的解析的数学表达式.依据泊松方程,考虑样品内的电场强度、介电常数和空间电荷密度随外界声波扰动而发生变化,将圆柱试样受到的压力波的影响分解成样品形变和质点位移两部分,进而得到了以同轴结构中空间电荷分布的压力波法测量的电压与电流表达式.测量电流的数学表达式表明,对于同轴结构,压力波法的测量电流信号不像平板结构中那样基本正比于空间电荷分布,而是应该做进一步的修正处理.     

Fabrication and characterization of ultra-low noise narrow and wide band Josephson parametric amplifiers

We have fabricated two types of lumped-element Josephson parameter amplifiers (JPAs) by using a multilayer micro-fabrication process involving wet etching of Al films. The first type is a narrow band JPA which shows typical gain above 14 dB in a bandwidth around 35 MHz. The second type is a wideband JPA which is coupled to an input 50 Ω transmission line via an impedance transformer that changes the impedance from about 15 Ω on the non-linear resonator side to 50 Ω on the input transmission line side. The wideband JPA could operate in a 200 MHz range with a gain higher than 14 dB. The amplifiers were used for superconducting qubit readout. The results showed that the signal to noise ratio and hence the readout fidelity were improved significantly.     

关于93Mo中21/2+晕阱的来源(英文)

本研究通过壳模型计算研究了N=51的同中子素91Zr、93Mo和95Ru中高自旋晕态21/2+的同核异能态现象。计算发现,低角动量的p_1/2轨道上的质子是仅在93Mo中存在21/2+晕阱的主要原因。同时,本工作还研究了N=52的同中子素92Zr、94Mo和96Ru中10₁+-12₁+能级结构的系统性,发现94Mo中的10₁+-12₁+能级间隙相对最小,考虑到与93Mo的17/2₁+-21/2₁+能级相似的组态,这一结果为93Mo中出现21/2+晕阱提供了补充性的论证。Isomerism of the high-spin yrast 21/2+ states of the N=51 isotones 91Zr, 93Mo and 95Ru has been investigated using the shell model calculations. It is found that the low-j πp_1/2 is responsible for the only yrast trap in 93Mo. In addition, the relatively smaller 10₁+-12₁+ level spacing in 94Mo has been found by investigating the systematics of the 10₁+-12₁+ level structures in the N=52 isotones 92Zr, 94Mo and 96Ru. This result provides a supplementary argument to the origin of the 21/2+ yrast trap in 93Mo from the viewpoint of the similarity between the configurations of 10₁+-12₁+ states in 94Mo and those of 17/2₁+-21/2₁+ states in 93Mo.     

Determination of the thermal noise limit in test of weak equivalence principle with a rotating torsion pendulum

Thermal noise is one of the most fundamental limits to the sensitivity in weak equivalence principle test with a rotating torsion pendulum. Velocity damping and internal damping are two of many contributions at the thermal noise, and which one mainly limits the torsion pendulum in low frequency is difficult to be verified by experiment. Based on the conventional method of fast Fourier transform, we propose a developed method to determine the thermal noise limit and then obtain the precise power spectrum density of the pendulum motion signal. The experiment result verifies that the thermal noise is mainly contributed by the internal damping in the fiber in the low frequency torsion pendulum experiment with a high vacuum. Quantitative data analysis shows that the basic noise level in the experiment is about one to two times of the theoretical value of internal damping thermal noise.     

固-液系统中表面增强喇曼散射强度ISERS对浓度c的依赖关系及水杨酸分子的吸附等温特性研究

在恒定温度下,通过测量不同浓度溶液中吸附在Ag镜表面水杨酸分子(SA)的表面增强喇曼散射(SEKS)强度(I_SERS,对固-液系统中吸附在Ag镜表面上SA分子的I_SERS对溶液浓度的依赖关系进行实验研究,并对I_SERS与吸附分子数N^s的关系进行分析讨论。实验研究和理论分析的结果表明:利用SERS技术通过测量I_SERS与溶液浓度c的依赖关系,可为固-液系统中分子在固体表面的吸附过程及吸附特性研究提供 关键词：     

超微结构中的Landauer—Buttiker输运理论

随着超微结构或者所谓的介观结构的尺度不断缩小而逼近各种描述固体属性的特征长度(相位相干长度、弹性散射长度或者布洛赫波长)时电子波函数的量子属性在介观结构的输运现象中表现得越来越明显。近年来发展日趋完善的Landauer-Buttiker输运理论由于明确考虑了波函数相位对输运的影响,在介释介观结构中各种量子相干输运现象时获得了很大的成功。本文力图较系统地介绍Landauer-Buttiker输运理论的要点,讨论介观结构中电导的对称性、电势分布的涨落和电势电极引起的相干性等重要问题。有关计算介观结构各电极间的散射矩阵S或者透射系数的微观理论不属本文讨论范围之内。     

(p,2p)准弹性敲出反应的多重散射展开

为了能更精确地描述(p,2p)这一类准弹性敲出反应,本文发展了一种多重散射展开方法.基于时间无关的多重散射理论.T矩阵元被展开成多重散射级数的形式.T_fi=M(1)M+T(2)M+....已经证明,第一项T(1)M的作用几乎等于前三级Bron展开的总和,因而,只取多重散射级数的头一项,就有相当高的精确度,而T(1)M的计算比较简单.将现在这种方法应用于纯库仑力的情况(例如氢原子的(e,2e)以及⁶Li(p,2p)⁵He,得到相当令人满意的结果.     

Performance enhancement of an InGaN light-emitting diode with an AIGaN/InGaN superlattice electron-blocking layer

The efficiency enhancement of an InGaN light-emitting diode （LED） with an A1GaN/InGaN superlattice （SL） electron-blocking layer （EBL） is studied numerically, which involves the light-current performance curve, internal quan- tum efficiency electrostatic field band wavefunction, energy band diagram carrier concentration, electron current density, and radiative recombination rate. The simulation results indicate that the LED with an A1GaN/InGaN SL EBL has better optical performance than the LED with a conventional rectangular A1GaN EBL or a normal A1GaN/GaN SL EBL because of the appropriately modified energy band diagram, which is favorable ibr the injection of holes and confinement of elec- trons. Additionally, the efficiency droop of the LED with an AIGaN/InGaN SL EBL is markedly improved by reducing the polarization field in the active region.     

Tm3+,Yb3+共掺钨酸钙多晶材料的上转换发光及荧光温度特性

采用高温固相法制备了Tm³⁺,Yb³共掺CaWO₄多晶材料. 980 nm二极管激光器激发下,在可见区获得了¹G₄→³H₆,¹G₄→³H₄,³H₂,³H₃→³H₆ 跃迁产生的上转换荧光. 讨论了Yb³⁺ 离子浓度的变化对Tm³⁺ 的上转换发光强度的影响,同时根据荧光强度比的方法研究了689 和705 nm 红色上转换荧光在313–773 K 范围内的温度特性. 结果表明：基于Tm³⁺,Yb³⁺ 共掺CaWO₄ 多晶材料的红色上转换荧光可以实现温度监测,其测温的最大灵敏度值为5.7×10^-4 K^-1,相应的测量温度为458 K. 关键词： 上转换发光 3+')" href="#">Tm³⁺ 钨酸钙 荧光温度传感     

高Q值超薄完美吸波体设计方法研究

为了增强完美吸波体的吸波性能,提出了一种高Q值超薄完美吸波体的设计方法. 该方法将基片集成波导技术与一般完美吸波体设计方法有机结合,通过合理添加金属过孔实现了高Q值的完美吸波体设计. 利用该方法设计出了厚度0.0065λ、半波功率带宽5.8%的完美吸波体,其吸波率Q值为33.9,比普通完美吸波体吸波率Q值提升了20%以上;其1.5和3 dBsm的雷达散射截面缩减Q值分别提高了54%和67%以上;同时该方法消除了传统设计中的频率偏移问题. 实测与仿真结果表明所设计的吸波体具有高Q值特征,也具有良好的雷达散射截面缩减效果,散射截面缩减最高达14 dBsm. 仿真和实测验证了设计方法的可靠性. 关键词： 基片集成波导技术 频率偏移 吸波率 雷达散射截面