均匀设计在UHMWPE纺丝拉伸工艺优化中的应用

以UHMWPE干法初生丝为原料进行三级连续热拉伸。参考均匀设计研究了拉伸过程中的各级温度、拉伸比、进丝速度共7个影响因素对产品丝的强度影响,利用二次多项式逐步回归优化了工艺条件,并用留一法计算PRESS对模型的预报功能进行验证。工艺优化后的纤维平均强度可达33.47cN/dtex,达到了优化的目的。     

一类半线性分数阶微分方程解的存在性

本文考虑如下一类含两项分数阶导数的半线性分数阶微分方程解的存在性问题: (_^c)D_t^α u(t)+ (_^c)D_t^β u(t)=f(t,u(t) ),0β>0, (_^c)D_t^β u(t)为Caputo分数阶导数. 我们利用Schauder不动点定理证明了在适当条件下解的存在性,所得结果改进了已有结论。     

DU型橡胶带式过滤机在催化剂微球装置中的应用分析

本论述结合某厂两套微球装置中橡胶带式过滤机的应用现状,从设备材料、设计、制造等方面,分析滑台与真空室堵塞、电气及仪表、胶带托辊及转向辊轴承座三类故障原因,结合实际工况,提出真空室、滑台堵塞故障处理方案,设计胶带托辊及转向辊轴承座改进措施,通过检修维护方案和改进措施的实施,减少了此类设备故障发生.通过实际应用发现,本论述方案解决了DU型橡胶带式过滤机在催化剂微球生产中的适应性问题,提升了设备运行周期,降低了维护费用,为同类型设备在催化剂生产应用中提供一定的参考价值.     

Measuring Loschmidt echo via Floquet engineering in superconducting circuits

The Loschmidt echo is a useful diagnostic for the perfection of quantum time-reversal process and the sensitivity of quantum evolution to small perturbations. The main challenge for measuring the Loschmidt echo is the time reversal of a quantum evolution. In this work, we demonstrate the measurement of the Loschmidt echo in a superconducting 10-qubit system using Floquet engineering and discuss the imperfection of an initial Bell-state recovery arising from the next-nearest-neighbor (NNN) coupling present in the qubit device. Our results show that the Loschmidt echo is very sensitive to small perturbations during quantum-state evolution, in contrast to the quantities like qubit population that is often considered in the time-reversal experiment. These properties may be employed for the investigation of multiqubit system concerning many-body decoherence and entanglement, etc., especially when devices with reduced or vanishing NNN coupling are used.     

Incommensurate-commensurate magnetic phase transition in double tungstate Li2Co(WO4)2

Magnetic susceptibility, specific heat, and neutron powder diffraction measurements have been performed on polycrystalline Li$_{2}$Co(WO$_{4}$)$_{2}$ samples. Under zero magnetic field, two successive magnetic transitions at $T_{\rm N1}\sim 9.4$ K and $T_{\rm N2}\sim 7.4$ K are observed. The magnetic ordering temperatures gradually decrease as the magnetic field increases. Neutron diffraction reveals that Li$_{2}$Co(WO$_{4}$)$_{2}$ enters an incommensurate magnetic state with a temperature dependent $\bm k$ between $T_{\rm N1}$ and $T_{\rm N2}$. The magnetic propagation vector locks-in to a commensurate value $\bm k = (1/2, 1/4, 1/4)$ below $T_{\rm N2}$. The antiferromagnetic structure is refined at 1.7 K with Co$^{2+}$ magnetic moment 2.8(1) $\mu_{\rm B}$, consistent with our first-principles calculations.     

Improved functional-weight approach to oscillatory patterns in excitable networks

Studies of sustained oscillations on complex networks with excitable node dynamics received much interest in recent years. Although an individual unit is non-oscillatory, they may organize to form various collective oscillatory patterns through networked connections. An excitable network usually possesses a number of oscillatory modes dominated by different Winfree loops and numerous spatiotemporal patterns organized by different propagation path distributions. The traditional approach of the so-called dominant phase-advanced drive method has been well applied to the study of stationary oscillation patterns on a network. In this paper, we develop the functional-weight approach that has been successfully used in studies of sustained oscillations in gene-regulated networks by an extension to the high-dimensional node dynamics. This approach can be well applied to the study of sustained oscillations in coupled excitable units. We tested this scheme for different networks, such as homogeneous random networks, small-world networks, and scale-free networks and found it can accurately dig out the oscillation source and the propagation path. The present approach is believed to have the potential in studies competitive non-stationary dynamics.     

闭孔泡沫金属变形模式的有限元分析

运用有限元软件ABAQUS/Explicit模拟了三维Voronoi闭孔泡沫金属在不同的冲击速度下的变形行为。随着冲击速度的提高,得到了3种变形模式:准静态均匀模式、过渡模式和冲击模式,并以相对密度和冲击速度为坐标建立了变形模式图。引入应力均匀性指标和变形局部化指标,确定了模式转化的临界速度,并与已有的冲击速度预测公式进行了比较。根据临界速度的数值和理论结果,提出了一种确定锁定应变的方案,结果介于压实应变和完全密实应变之间。     

与几何凸函数有关的一些单调函数的构造

本文利用文献[1]中的有关几何凸函数的不等式,来完成一些单调函数的构造,从而更好地说明几何凸函数的内在性质和特点.     

第三主族金属簇合物

金属簇合物化学是在金属有机化学与无机配合物化学基础上发展起来的一门新兴学科。第ⅢA族元素由于其缺电子特性而备受关注,大量以前认为不存在的、具有双键或叁键的第三主族金属簇合物分子相继被合成,并且通过X射线衍射和光谱学分析得到了它们的结构和性质。本文介绍了第ⅢA族金属簇合物的实验及理论研究进展,同时也提出了一些需要深入解决的新问题。     

OCS,CO2,N2O与烯、炔烃之间π…π作用的电子密度拓扑研究

采用MP2/aug-cc-pVDZ方法对氧硫化碳(OCS)、二氧化碳(CO2)、一氧化二氮(N2O)与乙烯(C2H4)、乙炔(C2H2)、2-丁炔(C4H6)之间形成的平行构型复合物中的分子间相互作用进行了理论研究.复合物的相互作用能按照B…C2H4B…C2H2>B…C4H6(B=OCS,CO2,N2O)的顺序依次减小.采用电子密度拓扑分析理论方法,讨论了复合物中π…π作用的成键特性.电子密度拓扑分析表明复合物中形成了弱的分子间相互作用,且以静电作用为主;π电子密度分子图与全电子密度分子图中键径方向是一致的,说明π…π作用在本文所讨论的体系中起着很重要的作用.NBO分析表明净电荷迁移从电子给体C2H4,C2H2,C4H6到电子受体OCS,CO2,N2O,迁移数按照B…C2H4相似文献