广义Stirling数及其性质

This paper gives a common generalization of generalized stirling number in [1]-[9].namely (x|a)n=∑k≥0 Aa,b(n,k)(x|b)k and obtains some properties..     

空间太阳极紫外三波段成像光谱仪系统设计

太阳上层大气,即日冕、过渡区和色球,是由炽热的高度动态的磁化等离子体构成,其中高度电离的离子发射出丰富的极紫外谱线。空间太阳极紫外光谱成像观测对于捕获太阳上层大气中爆发活动的动态物理演化过程,以及实现对大气等离子体特征参数的精确测量具有重要的意义。然而现有的极紫外光谱成像仪器只能针对太阳上层大气的一个或两个目标区域进行成像观测,缺乏采用单一仪器对整个太阳上层大气区域在大空间和宽波段尺度范围内的光谱进行诊断的能力,严重制约了人们对太阳爆发活动中的能量及物质输运过程的理解。为了利用单个仪器实现对日冕、过渡区和色球的高分辨率同时诊断观测,本文提出并设计了一款同时工作在17～21 nm、70～80 nm和95～105 nm三个波段的太阳极紫外成像光谱仪,该仪器基于非罗兰圆结构下的椭球面变线距（EVLS）光栅像差校正理论,采用狭缝扫描式成像光谱结构,实现了具有大离轴狭缝视场的高空间、高光谱分辨的消像散光谱成像。基于蒙特卡罗统计模拟方法对太阳极紫外三波段成像光谱仪的最优模型开展光线追迹仿真实验,仿真结果表明,所设计的成像光谱仪取得了良好的光栅像差校正效果,系统空间分辨率优于0.6″,光谱分辨率在1...     

An improved effective liquid drop model for cluster radioactivity

The effective liquid drop model(ELDM) is improved by introducing an accurate nuclear charge radius formula and an analytic expression for assaulting frequency. Within the improved effective liquid drop model(IMELDM), the experimental cluster radioactivity half-lives of the trans-lead region are calculated. It is shown that the accuracy of the IMELDM is improved compared with that of the ELDM. At last, the cluster radioactivity half-lives that are experimentally unavailable for the trans-lead nuc...     

用三坐标测量机调整掠入射光栅谱仪

用三坐标测量机调整掠入射光栅谱仪是我们在研制掠入射光栅谱仪中采用的新方法．我们用这种方法研制了一台曲率半径为１ｍ的光栅谱仪，在２—３２ｎｍ波段范围内，谱线分辨达０．００５ｎｍ，与通常采用的用光源摄谱调整光栅谱仪的方法相比，节省了人力、物力，缩短了研制周期．     

^95Zr核的高自旋态研究

利用102MeV的^28Si束流，通过^60Ni(^28Si，2pn)熔合蒸发反应布居了^85Zr核的高自旋态，测量了γ-γ符合及DCO比值，建立了一个有43条能级，75条γ跃迁的能级纲图，新增加了36条γ跃迁，25条能级。将能级自旋推高到（49/2^ ），首次观察到了转边带的第二回弯。并确认了一条建立在17/2^-负字称带上的磁转动带。     

超形变奇—奇核^194RI中的双堵塞效应

采用处理含有对力的推转壳模型的粒子数字恒方法研究了A－190区奇奇核194TI中6条超形变带，计算结果与实验符合得非常好，根据我们的PNC计算结果，分别指定了194TI的6条超形变带的组态，详细分析了质子和中子的堵塞效应对转动惯形的影响，转动惯量随转动频率的变化主要来源于高N闯入壳（对中子N＝7，对质子N＝6）的贡献，而其他大壳对转动惯量的贡献基本上不随转动频率变化。     

酞菁锌参杂二氧化硅凝胶基质的光谱学特征

利用溶胶-凝胶技术将四磺化酞菁锌（ZnPcS4）成功地引入到了二氧化硅凝胶基质中，制备了均匀掺杂的有机/无机复合干凝胶。研究ZnPcS4分子在溶胶-凝胶过程中紫外-可见吸收光谱的变化规律以探索其在复合体系中的存在状态。实验表明，在溶胶阶段，随着时间的延长，紫外-可见吸收光谱中单体的吸收峰强度增大，说明凝胶中酞菁单体的浓度增大；而形成凝胶后，随着时间的延长，紫外-可见吸收光谱中单体的吸收峰强度减小，二聚体的吸收峰强度增大，说明由于体系结构和微化学环境的变化，酞菁分子趋向于聚合。     

Solc型双折射滤波器离轴消光比的研究

提出了一种Solc型双折射滤波器的离轴消光比的一般性计算方法，利用所得结果模拟出了Solc型双折射滤波器的锥光干涉图以及发散光积分消光比与波长和发散角的关系曲线，实验结果证实了理论推算的合理性，此外本方法也适用于计算各种类型双折射滤波器的离轴消光比。     

Simultaneous Measurement of Transverse Load and Temperature Using a single Long—Period Fibre Grating Element

A single long-period fibre grating (LPFG)element written by focused high-fraequency CO2 laser pulses is demonstrated for simultaneous measurement of transverse load and temperature.Temperature and transverse load can be directly measured by detecting the resonant wavelength shift and the resonant peak amplitude change of the LPFG,respectively,as there are two special circular orientations along the fibre axis where the resonant peak amplitude change of the LPFG has a linear relationship with the load applied and is insensitive to the resonant wavelength shift.Such a sensor could solve the cross-sensitivity problem between transverse load and temperature due to the unique feature of this type of LPFG,i.e. the wavelength-load-sensitivity of the LPFG strongly depends on loading orientations due to the non-uniform distribution of the refractive index on the cross-section of the LPFG caused by the thermal shock effect and other effects of the high-frequency CO2 laser pulses exposure method used.     

Modelling of Laser—Generated Guided Waves in Bonded Plates with a Weak Interface by the Two—Layer Normal Mode Expansion Method

The two-layer normal mode expansion method is employed to analyse the laser-generated elastic guided waves in bonded plates accounting for the adhesive bond layer in terms of a weak interface with the spring model.The sensitivity of dispersion and transient characteristics of the guided wave to the stiffness coefficients characterizing the cohesive quality is analysed in details.This Method provides a new prominsing way for the characterization of the cohesive quality in bonded plates.