排序方式: 共有144条查询结果,搜索用时 46 毫秒
21.
A seed laser oscillating at different frequencies is proved to have the potential to mitigate the stimulated Brillouin scattering(SBS) effect in a fiber amplifier,which may increase the emission power of a coherent beam combination(CBC) system greatly.In this study,a basic mathematical model describing the multi-wavelength CBC is proposed on the fundamentals of CBC.A useful method for estimating the combination effect and analysing the feasibility and the validity of the multi-wavelength coherent combination is provided.In the numerical analysis,accordant results with four-wavelength four-channel CBC experiments are obtained.Through calculations of some examples with certain spectra,the unanticipated excellent combination effect with a few frequencies involved is explained,and the dependence of the combination effect on the variance of the amplifier chain length and the channel number is clarified. 相似文献
22.
窄谱光纤激光器在光束合成等领域有着广泛的应用,然而模式不稳定效应的出现严重限制着窄谱光纤激光器的功率提升。提出并验证了采用新型981 nm稳波长泵浦方案,能够应用于窄谱激光放大并提升模式不稳定效应阈值,通过采用单端后向泵浦结构,将单模窄谱光纤放大器功率提至4 kW以上。实验中采用白噪声相位调制展宽单频激光作为窄谱种子,主放大级分别采用稳波长976 nm和981 nm两种泵浦源单端后向泵浦。在采用976 nm泵浦源泵浦时,窄谱激光最高放大至3.4 kW,出现典型的模式不稳定效应特征,功率提升受到限制。在采用981 nm泵浦源泵浦时,窄谱激光最高放大至4.05 kW,且并未出现模式不稳定效应,输出光束质量M2因子为1.3,进一步功率提升仅受限于泵浦功率。通过优化激光器设计、结合双向泵浦结构,有望实现更高功率的窄谱光纤激光输出。 相似文献
23.
对光纤激光极限功率的探索和其受限因素的分析, 有利于为大功率光纤激光器的发展提供理论依据和实验指导. 本文考虑热效应、光效应、非线性效应和抽运亮度等因素对光纤激光极限功率的影响, 分析了掺镱和掺铥光纤的极限功率和受限因素. 在此基础上, 结合激光在光纤中单模传输的条件, 计算了单模掺镱和掺铥光纤激光的极限功率. 计算结果表明, 在现有技术条件下, 使用常规的976 nm和793 nm激光二极管抽运, 单模掺镱和掺铥光纤激光的极限功率分别为4.2 kW和7.8 kW, 其中单模掺铥光纤激光的功率水平还远低于它的极限功率的原因是受抽运亮度的限制. 最后分析指出减小纤芯的数值孔径和改进少模光束的光束质量是提升单模光纤激光极限功率的重要途径. 相似文献
24.
为了研究热致相位失配对中红外连续波单谐振光学参量振荡器(CW-SRO)输出效率的影响, 结合CW-SRO计算模型和热传导方程,利用有限元分析方法,重点对输出3.3 m波长闲频光的CW-SRO进行了分析。计算了不同信号光输出耦合率及不同泵浦功率下CW-SRO晶体输出截面上热致相位失配量的分布。由计算结果可以看出:晶体吸收腔中振荡信号光是导致晶体热效应的主要因素;在相同的输入条件下,泵浦功率在30 W以上时CW-SRO的热致相位失配将会大大降低其泵浦损耗率;通过增加信号光输出耦合率的方法,可以减少热致相位失配对CW-SRO输出效率的影响,但CW-SRO的振荡阈值会增加。 相似文献
25.
26.
27.
We present a high-power,single-frequency,narrow linewidth fiber amplifier based on master oscillator power amplification chains in an all-fiber configuration.The effect of the delivery fiber on the maximum output power is studied.A home-made 1064-nm seed laser with a 20-kHz linewidth is boosted to 129 W,and limited by stimulated Brillouin scattering(SBS) when the delivery fiber is 1.2 m long.By shortening the delivery fiber length to 0.7 m,the SBS threshold is increased efficiently and the maximum output power rises to 168 W with an 82.9% power conversion efficiency.The experimental results indicate that the output power can be further raised by shortening the delivery fiber length and increasing the pump power. 相似文献
28.
29.
30.