煤层顶板砂岩高温下超声传播特征分析

通过对鹤壁矿务局煤层项板砂岩试件在高温状态下和高温冷却后的超卢波测试,揭示了砂岩在高温状态下和高温冷却后的超声波传播随温度的变化规律,从声速、振幅和主频几个方面研究了在高温状态下和高温冷却后煤层顶板砂岩内损伤裂纹的发展变化过程。试验结果表明,在高温状态下和高温冷却后,振幅对岩石裂纹状态敏感程度大于声速和主题,振幅和声速随温度变化的曲线上存在着一骤降点,但各自反映的温度点有差异。其研究成果埘煤炭地下气化炉围岩在高温下的节理裂隙演化过程、组构和力学特性研究具有重要的作用和意义。     

First-Principles Study of Electronic Structure of the Laves Phase ZrFe2

We perform the ab initio calculation for obtaining the density of states and magnetic properties of ZrFe2 Laves phase compound based on the method of augmented plane waves plus local orbital The results indicate that the ferromagnetic state is more stable than the paramagnetic one, but with a slightly larger volume. The 3d - 4d exchange interactions between Fe and Zr electrons lead to the antiparallel coupling for Fe 3d and Zr 4d states, which is responsible for the ferrimagnetic ordering of the compound. The resulting magnetic moment of about 1.98μB for Fe is spatially localized near the Fe site, while around Zr a small but extended negative spin states causes a moment of about -0.44 μB. Moreover, the resulting magnetic moments with the generalized gradient approximation are more consistent with experimental values than that of the local-spin density approximation.     

High accuracy amplitude and phase measurements based on a double heterodyne architecture

In the digital low level RF (LLRF) system of a circular (particle) accelerator, the RF field signal is usually down converted to a fixed intermediate frequency (IF). The ratio of IF and sampling frequency determines the processing required, and differs in various LLRF systems. It is generally desirable to design a universally compatible architecture for different IFs with no change to the sampling frequency and algorithm. A new RF detection method based on a double heterodyne architecture for wide IF range has been developed, which achieves the high accuracy requirement of modern LLRF. In this paper, the relation of IF and phase error is systematically analyzed for the first time and verified by experiments. The effects of temperature drift for 16 h IF detection are inhibited by the amplitude and phase calibrations.     

Preparation and tribological properties of DLC/Ti filmby pulsed laser arc deposition

This paper reports that DLC (diamond like carbon)/Ti and DLC films were prepared by using pulsed laser arc deposition. R-ray diffraction, Auger electron spectroscopy, Raman spectroscopy, atomic force microscopy, nanoindenter, spectroscopic ellipsometer, surface profiler and micro-tribometer were employed to study the structure and tribological properties of DLC/Ti and DLC films. The results show that DLC/Ti film, with $I(D)/I(G)$ 0.28 and corresponding to 76{\%} sp$^{3}$ content calculated by Raman spectroscopy, uniform chemical composition along depth direction, 98 at{\%} content of carbon, hardness 8.2 GPa and Young's modulus 110.5 GPa, compressive stress 6.579 GPa, thickness 46~nm, coefficient of friction 0.08, and critical load 95mN, exhibits excellent mechanical and tribological properties.     

傅里叶变换红外光谱仪遥测污染云团的吸收光谱算法

遥感傅里叶变换红外光谱技术因其具有对污染源作无干扰监测、多组分的同时连续测定、区域性或大范围地区的测量等优点,因而已广泛的应用于遥感测量技术。利用傅里叶变换红外(FTIR)光谱仪远距离探测目标,根据探测的目标源是否充满光谱仪的视场,建立了三种辐射模型。在所建立模型的基础上,选用了D&P公司生产的便携式Model-101型傅里叶变换红外光谱仪,实时探测目标云团和背景,运用差谱法和发射光谱法对探测结果进行了光谱分析,进而得到了扣除背景影响后的目标云团吸收光谱。给出了相应的仿真实验结果示例。实验结果表明,由差谱法得到的结果准确度较好。     

Efficient scheme of quantum SWAP gate and multi-atom cluster state via cavity QED

In this paper, we propose a physical scheme to realize quantum SWAP gate by using a large-detuned single-mode cavity field and two identical Rydberg atoms. It is shown that the scheme can also be used to create multi-atom cluster state. During the interaction between atom and cavity, the cavity is only virtually excited and thus the scheme is insensitive to the cavity field states and cavity decay. With the help of our scheme it is very simple to prepare the N-atom cluster state with perfect fidelity and probability. The practical feasibility of this method is also discussed.     

Enhancing the thermoelectric performance through the mutual interaction between conjugated polyelectrolytes and single-walled carbon nanotubes

We present a method of constructing composites composed of conjugated polyelectrolytes(CPEs)and singlewalled carbon nanotubes(SWCNTs)to obtain a high-performing flexible thermoelectric generator.In this approach,three kinds of polymers,namely,poly[(1,4-(2,5-didodecyloxybenzene)-alt-2,5-thiophene](P1),poly[(1,4-(2,5-bis-sodium butoxysulfonate-phenylene)-alt-2,5-thiophene](P2),and poly[(1,4-(2,5-bis-acid butoxysulfonic-phenylene)-alt-2,5-thiophene](P3)are designed,synthesized and complexed with SWCNTs as thermoelectric composites.The electrical conductivities of the CPEs/SWCNTs(P2/SWCNTs,and P3/SWCNTs)nanocomposites are much higher than those of non-CPEs/SWCNTs(P1/SWCNTs)nanocomposites.Among them,the electrical conductivity of P2/SWCNTs with a ratio of 1:4 reaches 3686 S·cm^-1,which is 12.4 times that of P1/SWCNTs at the same SWCNT mass ratio.Moreover,CPEs/SWCNTs composites(P2/SWCNTs)display remarkably improved thermoelectric properties with the highest power factor(PF)of 163μW·m^-1·K^-1.In addition,a thermoelectric generator is fabricated with P2/SWCNTs composite films,and the output power and power density of this generator reach 1.37μW and 1.4 W·m;(cross-section)at△T=70 K.This result is over three times that of the thermoelectric generator composed of non-CPEs/SWCNTs composite films(P1/SWCNTs,0.37μW).The remarkably improved electrical conductivities and thermoelectric properties of the CPEs/SWCNTs composites(P2/SWCNTs)are attributed to the enhanced interaction.This method for constructing CPEs/SWCNTs composites can be applied to produce thermoelectric materials and devices.     

职业化背景下高校辅导员职业能力建设研究

近年来,我国各级教育行政主管部门及各高校高度重视辅导员队伍建设工作,辅导员的职业能力建设取得了一定成效,但仍存在一些问题。分析职业化背景下高校辅导员职业能力建设的具体内容,有助于找到解决问题的途径。职业化背景下高校辅导员职业能力建设应当从三个方面着手:其一,贯彻落实中央文件精神;其二,完善辅导员工作体系;其三,发挥辅导员的能动性。     

积极引导消费市场促进产业调整升级

经济高峰期,追求快乐体验的欲望驱使着人们开肩消费的闸门,将家里的冰箱挤爆、阳台堆满,掩盖了危机下消费不足的忧患.     

水泥混凝土路面裂缝的控制

随着公路交通事业的日益发展,行车密度、载重量和速度日益提高,交通量的快速猛增,原有的公路已经无法满足需要而进行改建成高等级公路,并大量地使用水泥混凝土路面.