物理课堂教学中的提问原则及技巧之我见

课堂教学中的提问是一门学问,更是一门艺术,它没有固定的模式,只要不断实践,不断摸索,就会提高自己的教学水平。在教学中科学地设计并恰当地进行课堂提问,可及时唤起学生的注意,创造积极的课堂气氛,激发学生的学习动机和兴趣,优化课堂结构,真正发挥教师的主导作用和学生的主体作用,从而展示教师的教学艺术,显现教师的教学魅力。本文主要从课堂提问的原则、提问的技巧这两个方面阐述一些个人的浅见。     

ZnTe（ZnTe：Cu）多晶薄膜的XPS研究

用共蒸发法在室温下制备了ZnTe及ZnTe：Cu多晶薄膜，测量了电导率温度曲线，发现不掺杂的ZnTe薄膜的暗电导随温度的增加而线形增加，呈常规的半导体材料特征；掺Cu的ZnTe薄膜在温度较低时，lnσ随温度升高而缓慢增加，随后缓慢降低，达到一极小值，当温度继续升高时又陡然增加，呈现异常现象。用XPS研究了N2气氛下退火前后表面状态，发现不掺Cu的ZnTe薄膜呈现富Te现象。掺Cu后Te氧化明显，以ZnTe形式存在的Te明显减少；ZnTe：Cu薄膜中Zn的含量在退火前后变化明显，退火前，Zn主要以ZnTe形式存在，退火后Zn原子向表面扩散，使表面成分更加均匀，谱峰变宽；退火时，部分Cu原子进入晶格形成CuxTe相，引起载流子浓度变化，导致ZnTe：Cu多晶薄膜的电导温度关系异常。     

Charge state distribution analysis of Al and Pb ions from thelaser ion source at IMP

A prototype laser ion source that could demonstrate the possibility of producing intense pulsed high charge state ion beams has been established with a commercial Nd:YAG laser (E_max=3 J,1064 nm,8-10 ns) to produce laser plasma for the research of Laser Ion Source (LIS). At the laser ion source test bench,high purity (99.998%) aluminum and lead targets have been tested for laser plasma experiment. An Electrostatic Ion Analyzer (EIA) and Electron Multiply Tube (EMT) detector were used to analyze the charge state and energy distribution of the ions produced by the laser ion source. The maximum charge states of Al¹²⁺ and Pb⁷⁺ were achieved. The results will be presented and discussed in this paper.     

Charge ordering modulations in a Bi_0.4Ca_0.6MnO₃ film with a thickness of 110 nm

The low temperature sample stage in a transmission electron microscope is used to investigate the charge ordering behaviours in a Bi 0.4 Ca 0.6 MnO 3 film with a thickness of 110 nm at 103 K.Six different types of superlattice structures are observed using the selected-area electron diffraction(SAED) technique,while three of them match well with the modulation stripes in high-resolution transmission electron microscopy(HRTEM) images.It is found that the modulation periodicity and direction are completely different in the region close to the Bi 0.4 Ca 0.6 MnO 3 /SrTiO 3 interface from those in the region a little further from the Bi 0.4 Ca 0.6 MnO 3 /SrTiO 3 interface,and the possible reasons for this are discussed.Based on the experimental results,structural models are proposed for these localized modulated structures.     

重氢原子进入钛晶体中引起的晶体结构转变与电解重水过程中“过热”现象的关系

对重氢原子进入钯或钛晶体中可能引起常温核聚变的机理探讨与实验研究结果，已在文献［１］中作了报导。后来又对钛阴极材料，在使用前后进行了Ｘ射线结构分析。发现在电解过程中发生过“过热”现象的钛阴极材料的晶体结构由原来的密排六方结构转变为立方结构，而没有发生“过热”现象的钛阴极材料的晶体仍然保持电解前的密排六方结构     

Edge assisted epitaxy of CsPbBr3 nanoplates on Bi2O2Se nanosheets for enhanced photoresponse

Bi$_{2}$O$_{2}$Se has been proved to be a promising candidate for electronic and optoelectronic devices due to their unique physical properties. However, it is still a great challenge to construct the heterostructures with direct epitaxy of hetero semiconductor materials on Bi$_{2}$O$_{2}$Se nanosheets. Here, a two-step chemical vapor deposition (CVD) route was used to directly grow the CsPbBr$_{3}$ nanoplate-Bi$_{2}$O$_{2}$Se nanosheet heterostructures. The CsPbBr$_{3}$ nanoplates were selectively grown on the Bi$_{2}$O$_{2}$Se nanosheet along the edges, where the dangling bonds provide the nucleation sites. The epitaxial relationships between CsPbBr$_{3}$ and Bi$_{2}$O$_{2}$Se were determined as ${[200]}_{\rm Bi_{2}O_{2}Se}||{[110]}_{\rm CsPbBr_{3}}$ and ${[110]}_{\rm Bi_{2}O_{2}Se}||{[200]}_{\rm CsPbBr_{3}}$ by transmission electron microscopy characterization. The photoluminescence (PL) results reveal that the formation of heterostructures results in the remarkable PL quenching due to the type-I band arrangement at CsPbBr$_{3}$/Bi$_{2}$O$_{2}$Se interface, which was confirmed by ultraviolet photoelectron spectroscopy (UPS) and Kelvin probe measurements, and makes the photogenerated carriers transfer from CsPbBr$_{3}$ to Bi$_{2}$O$_{2}$Se. Importantly, the photodetectors based on the heterostructures exhibit a 4-time increase in the responsivity compared to those based on the pristine Bi$_{2}$O$_{2}$Se sheets, and the fast rise and decay time in microsecond. These results indicate that the direct epitaxy of the CsPbBr$_{3}$ plates on the Bi$_{2}$O$_{2}$Se sheet may improve the optoelectronic performance of Bi$_{2}$O$_{2}$Se based devices.     

高能多粒子产生:实验综述

本文综述了欧洲核子研究中心P(?)对撞机上多粒子产生的性质、实验数据以及截面、多重数分布、赝快度分布、横动量分布、关联、粒子产额和衍射分解等。     

差动光程差倍增法测量微小位移

基于差动光程差倍增法将微小位移转化为多倍光程差,通过电桥光电转换电路,得到干涉条纹数的变化.采用差动干涉方法,提高了光程改变量与位移量的比例,使微小位移的测量精度提高到亚微米量级.     

近红外光谱方法在颌面外科皮瓣移植术后监测中的应用

近红外光谱技术作为一种无创组织氧监测手段,近年来在整形外科手术术后监测方面得到了越来越多的重视。文章利用一套近红外无损组织氧检测系统对6例手术成功病例的移植皮瓣侧和对照侧正常组织内的氧饱和度进行了长时间对比监测,发现两侧的组织氧饱和度之间存在显著性差异。还对一例血管吻合失败的病例下颌部的多个位置进行了检测,发现坏死部位的氧饱和度和正常组织相比处于很低的水平。实验结果表明,近红外光谱检测技术对于皮瓣内的血氧浓度动态变化具有很好的灵敏度,在移植皮瓣的术后监测方面具有良好的应用前景。     

CPLD在红外密集度光电立靶测试系统中的抗干扰的应用

通过对光电靶原理的分析,证明了弹丸所引起的光电靶输出信号与声波、蚊虫等所引起的光电靶输出信号是不同的。在此基础上,提出了一种利用CPLD(complexprogrammablelogicdevice)器件实现抗干扰电路的方法。仿真分析和应用结果表明:该电路能有效地抑制声波和蚊虫等带来的干扰,明显地提高了电路的抗干扰能力,保证了测试结果的可靠性和精确性。