Sol-gel synthesis and electrical properties of ceria-based solid electrolytes

A series of solid electrolytes (Ce_(0.8)RE_(0.2))_(1-x)M_xO_(2-δ)(RE: Rare earth, M: Alkali earth) were prepared by sol-gel methods. XRD indicated that a pure fluorite phase was formed at 800℃. The synthesis temperature by the sol-gel methods was about 700℃ lower than by the traditional ceramic method. The electrical conductivity and impedance spectra were measured. XPS showed that the oxygen vacancy increased obviously by doping MO, thus, resulting in the increase of the oxygen ionic transport number and conductivity. The performance of ceria-based solid electrolyte was improved. The effects of RE_2O_3 and MO on the electrical properties were discussed. The conductivity and the oxygen ionic transport number of (Ce_(0.8)Sm_(0.2))_(1-0.05)Ca_(0.05)O_(2(?)δ) is 0.126 S·cm~(-1) and 0.99 at 800℃, respectively.     

(Ce0.8RE0.2)1-xMxO2-δ固体电解质的溶胶-凝胶合成及其电性质

利用溶胶 凝胶法合成了 (Ce0 .8RE0 .2 ) 1-xMxO2 -δ(RE :稀土 ,M :碱土 )系列固体电解质 ,XRD表明 80 0℃即形成萤石结构 ,较高温固相反应合成温度低约 70 0℃ .测定了样品的电导率和阻抗谱 .XPS测试表明 ,掺杂碱土氧化物后吸附氧浓度明显增大 ,氧空位增多 ,电导率和氧离子迁移数增大 ,改善了CeO2 基固体电解质的性能 .讨论了碱土及稀土离子对电性质的影响 .(Ce0 .8Sm0 .2 ) 1-0 .0 5 Ca0 .0 5 O2 -δ80 0℃时电导率0 1 2 6S·cm-1,氧离子迁移数 0 .99.     

A Novel Complex of Na（I）-Nitronyl Nitroxide [Na（NIT- 1＇-MeBzIm）3]ClO4： Synthesis and Crystal Structure

A novel complex [Na（NIT-1＇-MeBzIm）3]ClO4 （NIT-1＇-MeBzIm = 2-{2＇-[（1＇- methyl）benzimidazolyl]}-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide） has been prepared and structurally characterized by elemental analysis, IR spectra and X-ray diffraction methods. The title complex crystallizes in trigonal, space group P3 and Z = 2. Crystal data： C45H57ClN12NaO10, Mr = 984.47, a = 13.9411（8）, b = 13.9411（8）, c = 14.8622（16） A, γ= 120°, V= 2501.5（3） A^3, Dc = 1.307 g/cm^3, μ（MoKα） = 0.152 mm^-1, F（000） = 1038, R = 0.0637 and wR = 0.1813 for 1957 observed reflections with I 〉 2σ（I）. X-ray analysis reveals that the Na（I） ion is six-coordinated with three NIT-1＇-MeBzlm radicals. As we know, three radicals coordinating to the Na（I） ion in the main group by a chelate way is the first example. The Na（I） ion resides in a distorted octahedron with a facial configuration. Meanwhile, the intermolecular weak interactions result in a 2-D double layer conformation where the uncoordinated perchlorate anions are inserted in the packing space and take part in the H-bond interactions, and each complex is connected with six neighboring complexes and three perchlorate anions.     

固体电解质BaCe_(1-x)RE_xO_(3-δ)的电导率及燃料电池性能

利用溶胶 -凝胶法合成了 Ba Ce1 - x REx O3-δ( RE:稀土 )系列固体电解质 ,结果证明纯 Ba Ce O3 导电性较差 ,RE3+ 的引入 ,取代了晶格中的 Ce4+ ,增加了氧空位 ,大大提高了体系的导电性。文章还研究了掺杂的 Ba Ce O3体系的导电机理 ,讨论了不同稀土离子掺杂对电导率的影响 ,以 Ba Ce1 - x REx O3-δ为固体电解质组装了 H2 /O2 燃料电池 ,电池的开路电压接近 1V,短路电流密度超过 10 0 m A/cm2 ,以 Ba Ce0 .8Gd0 .2 O2 .9为 SOFC电解质 ,80 0℃时最大输出功率密度达 30 m W/cm2 。     

液态金属电极的电化学储能应用

液态金属电极电导率高,电极界面容易构建,在充放电过程中可有效避免电极结构形变、枝晶生长等问题,在储能电池领域具有重要应用价值. 本文主要讨论了液态金属电极在液态金属电池、钠硫电池和ZEBRA电池中的应用进展,重点介绍了液态金属电池关键材料体系、充放电机制及电池构型等,评述了液态金属电极储能应用中涉及的熔盐电解质、固态陶瓷隔膜、多场影响因素等方面的重要研究进展,分析了高温密封、腐蚀防护等关键问题,明确了液态金属电极在储能电池应用中的发展方向.     

自升式平台桩腿防腐蚀技术研究

应用外加电流法阴极保护技术,通过传动机构将辅助阳极及参比电极下放至海底;对比固定式高纯锌参比电极,桩腿的电位始终保持在100—250mV范围内（国标中相对于高纯锌参比电极保护电位为O-250mV）;对比便携式参比电极（Cu／CuSO4）,桩腿的电位基本在-900mV左右,（国标中相对于Cu／CuSO4参比电极保护电位为一850一-1100mv）。结果表明采用外加电流法阴极保护技术,将电极通过电缆投入海水后,能够较好的对圆柱形不可进水式桩腿进行保护,是对自升式平台桩腿防腐蚀技术安装工艺的积极探索。     

3种变性淀粉与CaCO3相互作用的红外光谱研究

通过仿生合成的方法,以羧甲基淀粉、醚化淀粉、磷酸酯淀粉作为有机基质,在制备CaCO3晶体的过程中,通过傅里叶变换红外光谱对3种变性淀粉进行了跟踪测试表征。结果表明：3种变性淀粉分子中的C-O谱峰的强度均发生了变化,随着反应时间的增加,C-O峰强度不断减小,且减小的幅度非常大。对3种变性淀粉与CaCO3的作用机理进行了初步探讨。     

Synthesis,Crystal Structure and Ferromagnetic Properties of a New Dicyanamide Bridged Dicopper(Ⅱ) Complex with IM-1′-MeBzIm-κ2 N,O Mode

A new dinuclear copper(Ⅱ) complex with imino nitroxide radicals [Cu2(NO3)2(IM-1′-MeBzIm)2(dca)2] (IM-1′-MeBzIm = 2-{2′-[(l′-methyl)benzimidazolyl]}-4,4,5,5-tetramethylimi-dazoline-1-oxyl, dca = dicyanamide anion) has been prepared and structurally characterized by single-crystal X-ray diffraction. The complex crystallizes in triclinic, space group P1, with a = 9.440(5), b = 10.124(6), c = 11.603(7), α = 102.904(7), β = 94.033(6), γ = 104.299(7)°, C34H40Cu2N16O8, Mr = 927.90, V = 1038.2(10) 3, Z = 1, Dc = 1.484 g/cm3, μ(MoKα) = 1.093 mm-1, F(000) = 478, R = 0.0609 and wR = 0.1512 for 2889 observed reflections with I > 2σ(I). X-ray analysis reveals that two Cu(Ⅱ) atoms are bridged by two dicyanamides to form a centrosymmetric Cu(Ⅱ)-Cu(Ⅱ) dinuclear entity. Every Cu(Ⅱ) ion is five-coordinated with a distorted square pyramidal coordination geometry and IM-1′-MeBzIm ligand coordinates to the metal ion with the κ2 N(1′-MeBzIm), O(IM) mode to avoid steric hindrance with the methyl group in the complex. Meanwhile, the molecules are linked by intermolecular hydrogen bonds, leading to a 1-D chain structure. Moreover, such chains are further linked by π-π stacking interactions to form a 2-D network structure. Magnetic measurement demonstrates that the intramolecular exchange couplings between Cu(Ⅱ) ion and the IM-1′-MeBzIm are ferromagnetic with J = 12.46 cm-1, where the spin Hamitonian is defined as■ = -2J12 within the complex.     

多树枝结构和立方结构PbS的水热合成及形成机理

在无模板条件下,用Pb(NO₃)₂做铅源,(CH₄N₂S)做硫源,用水热法在160 ℃反应24 h制备了结晶度好的多树枝结构PbS。利用XRD、SEM、EDX、TEM对产物进行了表征,结果表明所得产物为面心立方多树枝状结构,单个树枝的长度为1.0～3.0 μm。此外,在碱性条件下丙三醇/水体系中制备了具有不同凹面的立方结构PbS,边长为2.0～5.0 μm。对2种不同形态PbS的影响因素进行了讨论,并提出了形成机理。同时对其荧光及紫外性质进行了研究,结果表明立方结构的PbS在309和373.5 nm处出现了2个荧光峰,在211和232 nm处出现了2个紫外吸收峰。     

半导体复合氧化物气敏材料研究进展

综述了近几年半导体复合氧化物的发展,包括分类、气敏机理、制备方法等,对其发展趋势提出了一些看法。引用文献33篇。