基于改进GoogLeNet的锌渣识别算法

针对目前热镀锌工艺中捞渣机器人工作效率低、缺乏选择性等问题,提出一种基于深度学习的锌渣识别算法,以提高捞渣生产线无人化水平.首先,在GoogLeNet网络基础上进行改进,并搭建了适用于实际生产环境的锌渣识别模型;其次,利用经验丰富的工作人员所标注的薄渣和厚渣这两类锌渣图片来建立数据库,完成锌渣分类模型的训练;最后,将工...     

线型优化最大熵线性预测方法自回归模型三种求解方法的比较

采用三种方法：修正协方差法MCOV(Modified Covariance Method)、递推极大似然估计法RMLE(Recursive Maximum Likelihood Estimator)和伯格法(Burg Method)求解线型优化最大熵线性预测方法中的自回归模型系数,并且在不同求解方法情况下,将阶次、信噪比对光谱复原的影响作了详尽的比较.研究结果表明:在线型优化最大熵线性预测方法的自回归模型系数三种求解方法中,修正协方差法要优于递推极大似然估计法和伯格法.     

迈克尔逊风场干涉仪基准光程差及步长误差容限分析

迈克尔逊干涉仪风场探测是在一定的基准光程差的基础上,通过动镜步进或四分区镀膜的方法,获得一个波长范围内步进间隔为λ/4的四步干涉强度.在此过程中存在的基准光程差误差及步长误差将对结果产生影响.对在一定的结果不确定度允许范围内的误差变量的容限值进行了讨论.在可以预知的误差存在情况下的精确结果的得出给出了计算方法.     

贵州汇川喇叭河国家湿地公园维管束植物区系分析

2018年的8月、11月和2019年的1月、5月,对遵义汇川喇叭河国家湿地公园内的植物开展了种类区系调查,根据野外调查记录与标本的鉴定,共记录维管束植物298种,含119科240属,其中被子植物274种,隶属99科218属,裸子植物7科7属8种,蕨类植物13科15属16种.植物区系分析结果显示,湿地公园内维管束植物属世...     

Preparation and tribological properties of DLC/Ti filmby pulsed laser arc deposition

This paper reports that DLC (diamond like carbon)/Ti and DLC films were prepared by using pulsed laser arc deposition. R-ray diffraction, Auger electron spectroscopy, Raman spectroscopy, atomic force microscopy, nanoindenter, spectroscopic ellipsometer, surface profiler and micro-tribometer were employed to study the structure and tribological properties of DLC/Ti and DLC films. The results show that DLC/Ti film, with $I(D)/I(G)$ 0.28 and corresponding to 76{\%} sp$^{3}$ content calculated by Raman spectroscopy, uniform chemical composition along depth direction, 98 at{\%} content of carbon, hardness 8.2 GPa and Young's modulus 110.5 GPa, compressive stress 6.579 GPa, thickness 46~nm, coefficient of friction 0.08, and critical load 95mN, exhibits excellent mechanical and tribological properties.     

PSM��ѹ��Դ��������ϵͳ����

介绍了HL-2A装置上用于二级加热系统的PSM高压脉冲电源的反馈控制系统.该电源控制系统以DSP+FPGA作为控制核心,输出112路驱动脉冲,以此来控制112个IGBT的通断,包括了驱动、通信、计算、反馈等部分,使电源系统输出稳定高压.设计了远程通信系统,其中基于VB的上位机与控制系统之间采用CAN总线技术来实现电源系统的相关参数设定及传输.DSP与FPGA实现了计算、反馈等功能.完成了相关的代码编写与系统测试.实验测试结果表明,该控制系统实现了高压电源的稳定输出,满足了实验的需求.     

Tribological properties of diamond-like carbon films deposited by pulsed laser arc deposition

A novel method, pulsed laser arc deposition combining the advantages of pulsed laser deposition and cathode vacuum arc techniques, was used to deposit the diamond-like carbon (DLC) nanofilms with different thicknesses. Spectroscopic ellipsometer, Auger electron spectroscopy, x-ray photoelectron spectroscopy, Raman spectroscopy, atomic force microscopy, scanning electron microscopy and multi-functional friction and wear tester were employed to investigate the physical and tribological properties of the deposited films. The results show that the deposited films are amorphous and the sp$^{2}$, sp$^{3}$ and C--O bonds at the top surface of the films are identified. The Raman peak intensity and surface roughness increase with increasing film thickness. Friction coefficients are about 0.1, 0.15, 0.18, when the film thicknesses are in the range of 17--21~nm, 30--57~nm, 67--123~nm, respectively. This is attributed to the united effects of substrate and surface roughness. The wear mechanism of DLC films is mainly abrasive wear when film thickness is in the range of 17--41~nm, while it transforms to abrasive and adhesive wear, when the film thickness lies between 72 and 123~nm.     

On a system of second order differential equations with periodic impulse coefficients

A thorough investigation of the systemd~2y(x):dx~2 p(x)y(x)=0with periodic impulse coefficientsp(x)={1,0≤xx_0>0) -η, x_0≤x<2π(η>0)p(x)=p(x 2π),-∞相似文献   

TiN和Ti1-xSixNy薄膜的微观结构分析

使用x射线衍射(XRD)、x射线光电子谱(XPS)、高分辨透射电子显微镜(HRTEM)和原子力显微镜(AFM)多种观测手段分析了TiN薄膜和Ti1-xSixNy纳米复合薄膜的微观结构.实验分析证明Ti1-xSixNy薄膜是由直径为3-5nm的纳米晶TiN和非晶Si3N4相构成,并且Ti1-xSixNy薄膜的表面粗糙度小于相同条件下制备的TiN薄膜,在Ti1-xSixNy薄膜体系的自由能中引入界面能的概念,在此基础上分析了体系中TiN晶粒的取向问题.     

脉冲放电等离子体烟气脱硫脱硝工业试验

脉冲放电等离子体烟气治理技术具有流程简单，一次投资成本低，无二次污染，可同时脱硫脱硝，形成的副产物可回收利用等特点。