Intensity Tuning Characters of Frequency Split Lasers

Laser frequency splitting generated by intracavity birefringence elements has been applied widely, but tuning characters of such lasers have not been successfully studied quantitatively. Based on the vectorial extension of Lamb‘s semi-classical theory, we study the intensity tuning of frequency splitting of He-Ne lasers. It is found that the intensity tuning curve is affected obviously by the compositive ratio of isotopes in the gain medium and the frequency difference of splitting modes. The threshold of locking is also quantitatively obtained. All the calculations are consistent with the experimental results.     

频率分裂与模竞争现象教学实验He—Ne激光器

一、引言激光课程中,激光的频率特性和激光烧孔效应及模竞争这两部分内容都是必需但又较难理解的内容,因而辅助教学的实验就显得尤为重要。通常进行激光频率特性实验的装置是扫描干涉仪。实验方法是让激光束射入扫描干涉仪,在示波屏上观察激光纵模。学生所能做的仅是学习如何使用扫描干涉仪和激光束含有几个纵模的感性认识。学生无法控制这些纵模(频率)以及纵模间隔。实验的质和量相对于纵模(频率)这一概念的重要性来说,显得不够充实。     

两种甲氧基苯基咔咯铜配合物的合成及光谱性质

合成了两个中位苯基上具有甲氧基取代基的铜咔咯配合物(Tp-OCH3PC)Cu和(To,p-(OCH3)2PC)Cu,通过紫外-可见、红外光谱、元素分析、核磁共振及质谱对它们进行了表征。研究了配合物在非水溶剂中的电子顺磁共振、电化学和光谱电化学性质,结果表明无论在固体状态还是在非水溶剂中,配合物的中心金属离子均为三价铜Cu(Ⅲ),在给定的溶剂中Cu(Ⅲ)可以发生可逆的还原反应生成Cu(Ⅱ),也可以被可逆氧化为Cu(Ⅲ)的阳离子自由基。探讨了甲氧基取代基以及溶剂对配合物的紫外-可见光谱和氧化还原电位的影响。     

基于激光回馈的波片在盘位相延迟测量系统

 利用激光回馈测量波片相位延迟精度高的优越性,以激光回馈技术为基础,实现光学波片的在盘测量,即在加工过程中,波片光胶于光胶盘的状态下测量波片位相延迟,以提高波片生产效率和成品率。采用凹面镜作为回馈镜以提高回馈信号调制深度,对激光回馈内、外腔长进行稳定,提高了系统可靠性;研究了波片与光胶盘光胶对波片测量的影响,提出并验证了在光胶盘上开孔,在打孔的光胶盘上光胶、加工、测量波片的新工艺,最终实现了波片在盘测量,测量长期重复性优于1°,经过激光频率分裂系统校正后,系统精度优于0.5°。     

Hilbert空间的正交序列与Kubert恒等式

主要讨论了与Kubert恒等式有关的一些积分性质以及Hilbert空间中的正交序列与Kubert恒等式之间的关系,并给出利用这些关系来构造Hilbert空间中几个具体的正交序列.     

广义Cochrane和在四分之一区间上的分布

研究了广义Cochrane和在四分之一区间上的分布性质,利用特征和与Dirichlet L-函数的均值估计以及周期Bernoulli多项式的性质,得到一个较强的渐近公式.     

Self-mixing interferometry based on nanometer fringes and polarization flipping

Self-mixing interferometry (SMI) based on nanometer fringes and polarization flipping is realized. The interferometer comprises a single-mode He-Ne laser and a high-amplitude reflectivity feedback mirror. The nanometer fringes are obtained by tilting the external feedback mirror. The fringe density is 35 times higher than that derived with conventional two-beam interference, and each fringe corresponds to a λ/70 displacement in external cavity length. Moreover, polarization flipping occurs when the external feedback mirror moves in the opposite direction. Such movement can be used to easily distinguish displacement direction. Experimental results show an optical resolution of displacement measurement of 9.04 nm with a range of 100 μm. The proposed SMI presents promising application prospects in precisely measuring displacement and calibrating other micro-displacement sensors because of its optical wavelength traceability.     

吡啶基双苯并咪唑的合成及其荧光性能

以多聚磷酸(PPA)为催化剂和溶剂,氮气保护下,吡啶基芳香二酸与邻苯二胺经缩合反应合成了三个新的吡啶基双苯并咪唑化合物(2a~2c),其结构经¹H NMR, ¹³C NMR, FT-IR和元素分析表征。2a~2c的固体荧光发射波长分别为473 nm, 427 nm和453 nm。     

基于SR-WAXS技术的竹材纤维素晶胞模型研究

竹材中纤维素聚集态结构的不同,将直接影响到竹纤维复合材料性能,对于竹材纤维素晶胞单元的认识主要基于Meyer-Misch模型,由于天然纤维素的同质异构体,在每种植物中存在比例不同,所以竹材中纤维素应有其特有的晶胞模型。以毛竹(Phyllostachys edulis (carriere) J. Houz)为研究对象,通过同步辐射广角X射线散射技术对毛竹纤维素晶胞模型进行研究,利用单斜晶系晶面间距公式与毛竹纤维素衍射峰,精确计算晶胞模型。结果显示,若以b轴为纤维轴的单斜晶系纤维素单元,则晶胞参数为：a=8.35 ,b=10.38 ,c=8.02 ,β=84.99°,该晶胞包含四个葡萄糖基,由两条反向平行分子链构成。研究结果可为开发制作高性能竹纤维复合材料等高附加值应用提供理论依据。     

Polarization switching in a quasi-isotropic microchip Nd:YAG laser induced by optical feedback

This paper demonstrates the influence of external optical feedback on the polarization state of longitudinal modes in quasi-isotropic microchip Nd:YAG lasers. Under optical feedback, the polarization state of longitudinal modes in quasi-isotropic lasers relies strongly on the intracavity anisotropy loss and mode competition. When the intracavity anisotropy loss is small, external optical feedback can cause polarization switching and strong mode competition between two orthogonal linearly polarized eigenstates of one laser longitudinal mode, which leads to the distortion of laser intensity modulation waveform. The polarization switching is independent of the initial external cavity length. By increasing the intracavity anisotropy loss, one polarization eigenstate can be suppressed and the laser works in single-polarization state. A theoretical analysis based on the compound cavity model is presented, which is in good agreement with the experimental results. The results offer guidance to the development of laser feedback interferometers.