低燃料比高炉改善能量利用的方向

实验室和生产高炉的研究发现,铁矿石的还原过程明显存在两个速度高峰,它把高炉内部分为上部高级氧化铁还原区、中部还原反应迟钝区和下部浮士体还原区等三部分。其中浮士体还原区还包括自热储备区下端到矿石熔滴以前(约950℃—1400℃甚至更高)的混合还原区与滴下带内的液态直接还原区。由固体浮士体间接还原和焦炭溶损反应组成的混合还原区是高炉内能量利用的关键区域,只有改善矿石还原性,降低焦炭反应性以增加该区内的间接还原量,才能降低高炉燃耗。上部高级氧化铁的间接还原虽可提高煤气利用率,但不能降低燃料比。位于热储备区的还原迟钝区是浮士体的潜在还原区。喷吹含氢高的辅助燃料、改善矿石还原性、提高鼓风温度和含氧量等可以挖掘该区的还原潜力,进一步降低高炉的燃科消耗量。     

预处理对355nm激光作用下熔石英损伤增长的影响

测试了经化学蚀刻、紫外激光预处理及其共同处理后的熔石英355 nm激光损伤阈值;研究了处理前后其损伤斑面积随激光辐照脉冲数的增长情况。结果表明,处理后熔石英355 nm激光损伤阈值得到了提高,且损伤斑面积增长变慢。利用CO2激光对熔石英表面损伤点进行了修复处理,修复后的损伤点R-on-1抗损伤阈值和基底阈值相当,损伤增长得到有效抑制。     

光学元件激光预处理技术

国外学者用1064 nm激光对pickoff镜进行预处理,发现损伤阈值平均提高38.8%。国内研究者用CO2激光中度抛光后,熔石英基片的损伤阈值提到了30%左右,激光波长、扫描方式等对处理效果影响也比较明显。介绍了三种公认的预处理机制,将离线与在线处理方式做了简单地比较,并对国内外激光预处理技术的发展和前景进行了展望。     

航天相机主动热控测试系统设计

为了检测航天相机主动热控系统的功能、性能及可靠性,设计了主动热控仿真测试系统。依据传热学基本定律、航天器轨道理论和热控策略,给出了计算航天相机温度场的热网络数学模型,使主动热控系统能在模拟的空间热环境中连续工作,实现了对主动热控系统的闭环仿真测试。采用两个数字电位器相串联的方法模拟温度传感器的走势,得到的最大阻值为100 kΩ,精度达到10Ω,符合设计中对总电阻和电阻变化率的需求,实现了对主动热控系统的功能、性能以及可靠性的仿真测试。     

Effect of fused silica subsurface defect site density on light intensification

The effect of defect density on the modulation of incident laser waves is investigated. First, based on the actual defect distribution in the subsurface of fused silica, a three-dimensional (3D) grid model of defect sites is constructed. The 3D finite-difference time-domain method is developed to solve the Maxwell equations. Then the electrical field intensity in the vicinity of the defect sites in the subsurface of fused silica is numerically calculated. The relationships between the maximal electrical field intensity in fused silica and the geometry of the defect sites are given. The simulated results reveal that the modulation becomes more remarkable with an increase of the defect density. In addition, the effect of the distribution mode of defects on modulation is discussed. Meanwhile, the underlying physical mechanism is analyzed in detail.     

Role of chelating agent in chemical and fluorescent properties of SnO2 nanoparticles

A modified polyacrylamide gel route is applied to synthesize SnO2 nanoparticles. High-quality SnO2 nanoparticles with a uniform size are prepared using different chelating agents. The average particle size of the samples is found to depend on the choice of the chelating agent. The photoluminescence spectrum detected at λex = 230 nm shows a new peak located at 740 nm due to the surface defect level distributed at the nanoparticle boundaries.     

Shaping of few-cycle laser pulses via a subwavelength structure

We theoretically investigate the propagation of few-cycle laser pulses in resonant two-level dense media with a sub- wavelength structure, which is described by the full Maxwell-Bloch equations without the frame of slowly varying envelope and rotating wave approximations. The input pulses can be shaped into shorter ones with a single or less than one optical cycle. The effect of the parameters of the subwavelength structure and laser pulses is studied. Our study shows that the media with a subwavelength structure can significantly shape the few-cycle pulses into a subcycle pulse, even for the case of chirp pulses as input fields. This suggests that such subwavelength structures have potential application in the shaping of few-cycle laser pulses.     

溶胶-凝胶SiO2薄膜氨热两步后处理

 以正硅酸乙酯为前驱体,氨水作催化剂,采用溶胶-凝胶法提拉镀制SiO₂双面膜,对薄膜进行氨处理和热处理。采用椭偏仪、分光光度计、红外光谱、扫描探针显微镜、静滴接触角测量仪表征薄膜的特性。研究表明：经氨热两步后处理,膜厚持续减小,折射率经氨处理先增大了0.236,再经热处理又减小了0.202,膜层透光性变好,透过率峰值持续向短波方向移动;经两步后处理的膜面平整度明显变好,与水的接触角先增大到58.92°后减小到38.07°。     

疏水基底表面可控生长有机单晶阵列用于高性能晶体管

有机场效应晶体管(OFETs)、有机发光二极管等光电器件有望实现低成本柔性光电子应用,但低成本潜力取决于基于溶液法大面积沉积有机半导体单晶(OSSC)阵列的能力.然而,差的表面润湿行为和复杂的流体动力学过程限制了溶液沉积大面积OSSC阵列.本文中,我们通过添加微量的表面活性剂改善了润湿性能和流体干燥动力学,并增强了有机...