一种基于图像融合的运动目标快速检测算法

提出了一种新的运动目标检测方法,这种方法可以有效的提取目标轮廓。应用一种图像差分技术得到运动目标的初始轮廓线。使用了动态轮廓线使其收敛到目标轮廓。提出了一种新的目标轮廓特征级融合方法,求解两类模式图像的收敛动态轮廓线控制点向量差的范数平方极小化。这种方法不需要图像配准降低了融合的计算复杂度,有效提高了可见光图像中目标轮廓提取的精度。对比检测实验证实了算法的有效性。设计了一种基于Newmark方法的动态轮廓线快速迭代算法,将该方法和方法作了比较,对比实验表明这种方法的时间复杂度降低了22%。     

重稀土高氯酸盐甲基苯甲酰甲基亚砜配合物的合成及Tb3+的发光

合成了重稀土高氯酸盐甲基苯甲酰甲基亚砜配合物RE(ClO4)3·L5·C2H5OH(RE=Gd,Tb,Dy,Tm,Yb;L=C6H5COCH2SOCH3).经元素分析、稀土络合滴定、摩尔电导及热重分析确定了配合物的组成,测定了配体及配合物的IR谱、1H NMR及铽配合物的磷光光谱、荧光激发和发射光谱,根据荧光发射光谱数据计算了铽配合物的各能级值.     

The effect of a permanent dipole moment on the polar molecule cavity quantum electrodynamics

A dressed-state perturbation theory beyond the rotating wave approximation(RWA) is presented to investigate the interaction between a two-level electronic transition of polar molecules and a quantized cavity field. Analytical expressions can be explicitly derived for both the ground- and excited-state-energy spectrums and wave functions of the system, where the contribution of permanent dipole moments(PDM) and the counter-rotating wave term(CRT) can be shown separately.The validity of these explicit results is discussed by comparison with the direct numerical simulation. Compared to the CRT coupling, PDM results in the coupling of more dressed states and the energy shift is proportional to the square of the normalized permanent dipole difference, and a greater Bloch–Siegert shift can be produced in the giant dipole molecule cavity QED. In addition, our method can also be extended to the solution of the two-level atom Rabi model Hamiltonian beyond the RWA.     

低聚壳聚糖几何结构和物理化学属性的理论研究

运用密度泛函B3LYP/6-31G+(d)方法对gg构象的低聚壳聚糖进行了结构优化、频率计算和电子结构,并用更高精度的WB97XD/6-311+G(d,p)方法计算了平均结合能及零点能校正,分析了热力学性质.结果表明,由于低聚壳聚糖中的氢键作用,使其形成螺旋结构;聚合度的增加,使平均结合能随之下降,结构的稳定性增强;在降解过程中,均为放热反应,验证了利用降温来提高降解产率的实验的可行性;此外,聚合度的增加,使能隙减小且快速收敛于聚合度为7的6.99 eV,稳定的反应活性与实验相符;HOMO、LUMO的电子密度分布表明,化学活性集中在C2位的氨基、C6位的羟基以及链的两端位置.该结果对低聚壳聚糖模型的建立和低聚壳聚糖降解过程、活性位置以及物理化学属性的尺寸依赖等现象的研究有着指导意义.     

钢铁检测微型光谱仪的研制

针对国内光电直读型钢铁检测微型光谱仪研究的不足,提出基于Czerny-Turner结构的系统设计方法,讨论了优化方法及验证方法,并加工出了光谱仪。光谱仪采用三次多项式拟合标定波长,实测分辨率在436 nm~608 nm全谱段达0.225 nm、中心谱段达0.135 nm,基本满足钢铁检测要求。提出一种基于多帧判断的定性分析方法,7种待测元素检出限优于1.5%,通过建立拟合光谱数据库实现半定量分析,25种样品检测精度达2%,为钢铁牌号识别提供重要参考。     

无线激光通信在高速视频传输中的应用

利用无线激光通信传输速率高的优势,设计并实现了一套622Mbps视频传输系统。将视频转换、数据处理、激光收发等功能集中在单块电路板上,提高了灵活性。使用片内异步先进先出队列（FIFO）组成乒乓操作,对连续视频数据流进行有效切换控制。采用曼彻斯特编码较好地从接收信号中恢复出数据和时钟,有利于接收串行数据流的边界检测和同步。实验表明,本系统可以稳定地传输视频,满足地面距离应用的需要,为进一步研究激光通信各项技术提供了平台。     

High-power high-stability Q-switched green laser with intracavity frequency doubling of diode-pumped composite ceramic Nd:YAG laser

We successfully obtain high-average-power high-stability Q-switched green laser based on diode-side-pumped composite ceramic Nd:YAG in a straight plano-concave cavity. The temperature distribution in composite ceramic Nd:YAG crystal is numerically analyzed and compared with that of conventional Nd:YAG crystal. By use of a composite ceramic Nd:YAG rod and a type-II high gray track resistance KTP (HGTR-KTP) crystal, a green laser with an average output power of 165 W is obtained at a repetition rate of 25 kHz, with a diode-to-green optical conversion of 14.68%, and a pulse width of 162 ns. To the best of our knowledge, both the output power and optical-to-optical efficiency are the highest values for green laser systems with intracavity frequency doubling of this novel composite ceramic Nd:YAG laser to date. The power fluctuation at around 160 W is lower than 0.3% in 2.5 hours.     

Flow Structures Around Micro-bubbles During Subcooled Nucleate Boiling

The flow structures were investigated around micro bubbles on extremely thin wires during subcooled nucleate boiling.Jet flows emanating from the bubbles were observed visually with the fluid field measurement using high-speed photography and a PIV system.The jet flows induced a strong pumping effect around a bubble.The multi-jet structure was further observed experimentally, indicating the evolution of flow structure around micro bubbles.Numerical simulations explore that the jet flows were induced by a strong Marangoni effect due to high temperature gradients near the wire.The bubble interface with multi-jet structure has abnormal temperature distribution such that the coolest parts were observed at two sides of a bubble extending into the subcooled bulk liquid rather than at the top.Evaporation and condensation on the bubble interface play important roles not only in controlling the intensity of the jet flow,but also in bringing out the multi-jet structure.     

RIBLL终端LASCAR闪烁体阵列探测器研制进展

介绍了RIBLL终端LASCAR闪烁体阵列探测器的工作原理和结构特点. 描述了为满足放射性核束实验的要求而对阵列所作的重要改进. 给出了LASCAR构型优化改造的工作设想和实施步骤. The principles and structure characteristics of LASCAR scintillator array detector at RIBLL terminal are described. Special emphases are laid upon the latest progress for the development of LASCAR array detector to meet the requirements of the RIB experiments. The working plan and steps for optimizing configuration of the LASCAR multi unit neutron scintillator array detector are also presented.     

3 ω线法测量液体热参数影响因素分析

首先给出基于谐波探测技术测量液体导热系数和热扩散系数的3ω线法的基本原理.采用实验和理论分析相结合的方法,分析了加热丝结构参数和自身热参数对温度波动和测量结果的影响.给出了加热丝直径和长度的合理范围.液体导热系数比较小时可以利用三次谐波的实部和虚部的交点测量液体的比热容.