排序方式: 共有53条查询结果,搜索用时 8 毫秒
1.
阳离子聚丙烯酰胺表征及其阳离子度测定方法 总被引:3,自引:0,他引:3
采用反相微乳法,合成丙烯酰胺(AM)和甲基丙烯酰氧乙基三甲基氯化铵(DMC)的阳离子聚合物,并采用胶体滴定法测试聚合物的阳离子度,分析了溶液pH值、指示剂用量、滴定速度及残余乳化剂对阳离子度测试准确性的影响,并用红外光谱法确定了聚合物阳离子链节的存在。 相似文献
2.
A large-mode-area(LMA) ytterbium-doped photonic crystal fiber(PCF) with core NA of 0.034 and core diameter of 50 μm was made by the stack-and-draw technique. The core is formed by Yb~(3+)/Al~(3+)/F-/P~(5+) co-doped silica glass containing 0.09 mol% Yb_2O_3 with an absorption coefficient at 976 nm up to 3.2 d B/m. The core glass with homogeneous distribution of Yb~(3+) ions and refractive index difference of 4 × 10~(-4) compared with pure silica was prepared by the sol-gel method and heat homogenization at 2000°C. Laser power amplification of this LMA PCF was studied using a seed source of 21 ps pulse duration and 48.7 MHz repetition rate at 1030 nm wavelength. With pump power of 520 W, a maximum 272 W(266 k W peak power) quasi-single-mode laser output with M~2 of 2.2 was achieved in a 4.7 m fiber length bent at a diameter of 47 cm with slope efficiency of 52%, and no obvious mode instability, stimulated Raman scattering, or thermal damage on the end facet of the fiber were observed. 相似文献
3.
4.
The emission properties of 2-μm region fluorescence of Tm~(3+)-Ho~(3+) co-doped tellurite glasses are investigated. Introducing F~- ions to the composition of tellurite glasses plays a positive effect on the 2-μm emission.A maximum intensity of 2-μm emission is achieved when 1.5-mol%Tm_2O_3 and l-mol% Ho_2_O3 concentration are doped in the glasses.The emission cross section and gain coefficient of the ~5I_8→~5I_7 transition of Ho~(3+) are calculated.The emission cross section has a maximum of 1.29×10~(-2... 相似文献
5.
为了研究移动荷载作用下结构的安定性问题,以Melan静力型安定定理为基础,通过构造满足静力平衡条件的最佳残余应力场,并求解移动荷载作用下结构中的真实弹性应力场,发展了一种弹塑性安定性计算方法.该方法摆脱了传统安定性分析方法中的数学规划运算,解决了计算中维数障碍的问题.通过与前人研究结果对比,说明本方法的正确性.基于此方法,研究了列车荷载直接作用下路基的静力安定极限的第一类上限kI和静力安定极限kSD,进行轮载间距L和铁轨间距B对路基安定极限的敏感性分析,发现当轮载间距L和铁轨间距B大于等于10a时,轮载间距L和铁轨间距B对路基安定极限不再产生影响;通过分析材料泊松比v和内摩擦角φ对安定极限的影响,表明安定极限随着路基泊松比的增大略有减小,但随着内摩擦角的增大而有明显增加;并提出了一种基于安定极限荷载包络图的路基安定性评价方法和设计方法,据此可对铁路路基进行设计指导和安全性评价. 相似文献
6.
设计了一类线型聚多联苯2,6-二甲酰对苯二胺聚合物, 并对聚合物分子模型进行了计算机模拟, 通过分子力学和力学性质模块的计算得到了聚多联苯2,6-二甲酰对苯二胺的一些力学参数. 模拟结果表明, 聚多联苯2,6-二甲酰对苯二胺类型芳酰胺聚合物通过自组装可以呈现类倒插蜂窝结构排列, 除聚二联苯2,6-二甲酰对苯二胺和聚三联苯2,6-二甲酰对苯二胺以外, 该系列聚合物在xy平面内均具有负泊松比. 相似文献
7.
8.
用红外热成像技术可以表征高聚物材料拉伸形变过程的热效应特征.本文主要从测试装置的建立、红外热成像仪的镜头选择、材料发射率的确定及温度的采集方法等几个角度,介绍如何通过红外热成像仪提高测试高聚物材料形变热效应特征准确性的方法. 相似文献
9.
新课程下课堂作业的布置始终是课程目标关注的重点,而思想品德课作业以其固有的育人特点,也被许多人士所瞩目。文章试图从作业的形式、内容、流向、完成方式、评价手段等方面,对思想品德课的作业布置作一点有益的探索,以期在不断推进的教育改革大背景下,在新课程的洪流中,为思想品德课的教育教学工作做出一点贡献。 相似文献
10.