旋转调制捷联惯导激光陀螺仪误差自补偿新方法

基于旋转调制的自补偿技术是进一步提高激光陀螺仪捷联惯导系统导航精度的有效方法。研究了旋转调制捷联惯导系统中的激光陀螺仪误差补偿方法。建立旋转式捷联惯导系统激光陀螺仪的误差传播方程,分析激光陀螺仪旋转误差效应及误差传播特性,在此基础上建立了调制策略编排目标函数;研究了双轴交替旋转调制模式下的调制策略编排方案,提出了一种改进的16次序双轴交替旋转调制方法,建立了基于双轴转动角速度的动态误差方程,实现了转动过程中激光陀螺仪的常值项误差、标度因数误差、安装误差的有效补偿,进一步抑制速度误差积累所引起的位置误差。仿真结果验证了该方法的有效性,提高了捷联惯导系统导航精度,可为旋转调制光学捷联惯导系统设计提供理论参考。     

Closed-form breakdown voltage/specific on-resistance model using charge superposition technique for vertical power double-diffused metal–oxide–semiconductor device with high-κ insulator

An improved vertical power double-diffused metal–oxide–semiconductor(DMOS) device with a p-region(P1) and high-κ insulator vertical double-diffusion metal–oxide–semiconductor(HKP-VDMOS) is proposed to achieve a better performance on breakdown voltage(BV)/specific on-resistance(Ron,sp) than conventional VDMOS with a high-κ insulator(CHK-VDMOS).The main mechanism is that with the introduction of the P-region,an extra electric field peak is generated in the drift region of HKP-VDMOS to enhance the breakdown voltage.Due to the assisted depletion effect of this p-region,the specific on-resistance of the device could be reduced because of the high doping density of the N-type drift region.Meanwhile,based on the superposition of the depleted charges,a closed-form model for electric field/breakdown voltage is generally derived,which is in good agreement with the simulation result within 10% of error.An HKP-VDMOS device with a breakdown voltage of 600 V,a reduced specific on-resistance of 11.5 m?·cm~2 and a figure of merit(FOM)(BV~2/Ron,sp)of 31.2 MW·cm~(-2) shows a substantial improvement compared with the CHK-VDMOS device.     

加窗VISAR测试技术研究

本文介绍与VISAR配合的加窗干涉仪测试技术，利用这一技术得到了6.5GPa冲击压力下铜-LiF晶体窗口之间的界面速度变化过程。实验中采用铜样品表面作为信号光反射面，对窗体本身提出采用楔形的技术，有助于消除表面反射光和窗体寄生干涉对VISAR信号的干扰，从而提高信号的信噪比和可靠度。     

Study of a bulk-Micromegas with a resistive anode

The design and performance of a Micromegas with a resistive anode are presented in this paper. A thin resistive sheet with volume resistivity of 10¹² Ω·m cm is glued onto the readout electrode surface and its performance is investigated by using a ⁵⁵Fe X-ray radioactive source in the operation gas of argon and isobutene mixtures (Ar/Iso=95/5). The gas gain at different mesh high voltage, counting rate and working time are given. Energy spectra at different working voltages are measured and the results are discussed. We have oberved that a Micromegas with a resistive anode can be operated at higer gain than a standard Micromegas without sparks.     

Micromegas prototypes with thermo-bond film separators

In this paper we report the results of Micromegas prototypes constructed by attaching micromesh to an anode using thermo-bond films. The excellent metal attaching ability and good dielectical property of this kind of film make it a promising material to be used as avalanche gap spacers. Several prototypes are successfully made. The electron transmission properties are first studied and then the gas gain is measured in argon-isobutane mixtures. The maximum gain of more than 10⁴ is easily obtained. The energy resolutions for ⁵⁵Fe 5.9 keV K_α ray can be better than 20% over one magnitude in gain for different operational gas mixtures and the best energy resolution of 13.7% (FWHM) can be achieved with the gas mixture of 94% argon concentration. The preliminary test results of the prototypes with sensitive area of 45 mm×45 mm without internal support show good uniformity across the sensitive area.     

A molecular dynamics simulation of segregation behaviours of horizontally vibrated binary granular mixture

This paper performs the two-dimensional, soft-sphere molecular dynamics simulations to study the granular segregation in a binary granular mixture with the same size but different density in the container with the sawtooth base under horizontal vibration. The segregation phase diagram is presented in the acceleration-frequency space. When the acceleration is high enough to result in relative motions of the particles, the system can be in various states (mixed state, vertical and horizontal segregation state), which depend on both acceleration and frequency. Due to the sawtooth base there is stratified flow effect besides density effect. The density effect raises the light particles. The stratified flow drives the particles in the upper levels to the right and the particles in the lower particles to the left, those fact results in the appearance of the left segregation state. The left segregation state can be changed to the right segregation by changing the shape of the sawtooth. As the vibration frequency increases, the stratified flow effect becomes weaker and weaker, so at high vibration frequencies the vertical segregation state appears instead of the left segregation state.     

使用广义粗网有限差分方法加速中子输运特征线方法

提出广义粗网有限差分方法(GCMFD),可以使用三维任意几何形状的粗网格来加速中子输运特征线方法(MOC),同时给出确定广义粗网有限差分方法中宽度因子的方法.将广义粗网有限差分方法应用到三维特征线方法程序TCM中,若干基准题的验证表明,广义粗网有限差分方法可以使用任意形状粗网格来加速特征线方法,使用自动调整宽度因子的方法后,广义粗网格有限差分方法可以得到较好的加速效果.     

调强放射治疗子野权重优化方法研究

由于子野分割带来的误差, 使得调强放疗(Intensity Modulated Radiation Therapy, 简称IMRT)计划系统所制作的计划往往不能满足临床要求。 本研究将采用基于共轭梯度法的子野权重优化方法来减小此误差, 提高制作计划的效率和效果。 采用共轭梯度法优化子野权重和微调子野形状, 最终使得子野分割前后强度误差最小。 在精确放疗系统中对常见的临床病例（鼻咽癌和周围性肺癌）进行测试, 通过对比靶区和危及器官的剂量体积直方图以及CT片上的等剂量线, 发现子野权重优化后靶区的平均剂量分别从87.0%提高到100.2%和从90.0%提高到98.4%, 更好地满足临床要求。     

1.65μm附近CH4分子高分辨率吸收光谱研究

采用连续可调谐二极管半导体激光器为探测光源,以可调怀特型长光程多通池(46.36～1158.90m)作为吸收池,采用直接吸收的方法,探测了室温下1.65μm附近CH4分子的高分辨率吸收光谱。在6043.00～6053.72cm-1范围内探测了5组不同压力和光程下的吸收光谱,观测到了259条线新的CH4分子吸收谱线,实验数据用Gaussian线型进行拟合,得到了这些吸收谱线的线强、线位置以及线强的标准偏差值,并对光谱中难以分辨的吸收谱线进行了分析。探测得到的最小谱线线强是4.3×10-27cm-1·(molcule·cm-2)-1,吸收谱线线强大于3.0×10-24cm-1·(mol·cm-2)-1由于吸收饱和而未被处理,同时所测得的光谱也显示出CH4分子在1.65μm附近有非常丰富的弱吸收谱线和复杂的结构。文中所报道的吸收谱线都是HITRAN2004数据库中所未报道的,而且也未见有其他文献报道过。     

冲击型微小三通内弹环状流的相分配特性

本文在入口条件为弹环状流的条件下,考察了氮气-水两相流在水力直径为0.5 mm的水平等径冲击型三通中的相分配特性。根据入口与两个分支夹角的不同,冲击型三通分为T型冲击三通和Y型冲击三通。结果发现:相分配受入口流型的影响因冲击角而异。对于T型三通,入口流型对相分配的影响较小;而对于Y型三通,随着入口条件从靠近弹状流区域过渡到靠近环状流区域,相分配往等干度分配线靠近。变动冲击角对气液两相流的相分配有一定的影响,影响程度因入口条件而异。