稀土改性β沸石对流化催化裂化催化剂性能的影响

以稀土改性β沸石替代质量分数为5％的REUSY作为流化催化裂化模式催化剂的活性组分，利用轻油微反活性试验和固定一流化床装置评价了其催化性能。结果表明，在流化催化裂化催化剂中加入一定量稀土改性β沸石，可以提高原料油的转化率，降低催化剂的比积炭及催化裂化汽油的烯烃含量，并能使汽油的辛烷值有所提高或保持不变。稀土改性β沸石是优良的流化催化裂化催化剂活性组分。     

Noether symmetry and conserved quantity for a Hamilton system with time delay

In this paper, the Noether symmetries and the conserved quantities for a Hamilton system with time delay are discussed. Firstly, the variational principles with time delay for the Hamilton system are given, and the Hamilton canonical equations with time delay are established. Secondly, according to the invariance of the function under the infinitesimal transformations of the group, the basic formulas for the variational of the Hamilton action with time delay are discussed,the definitions and the criteria of the Noether symmetric transformations and quasi-symmetric transformations with time delay are obtained, and the relationship between the Noether symmetry and the conserved quantity with time delay is studied. In addition, examples are given to illustrate the application of the results.     

Ablation enhancement by defocused irradiation assisted femtosecond laser fabrication of stainless alloy

We evaluate the effects of the holes geometry drilled by a femtosecond laser on a stainless alloy with various defocused irradiation time, which ranges from 0 min to 1 h. The laser ablation efficiency is increased by a factor of3 when the irradiation time is elevated from 0 to 30 min. Also, the morphology of the hole is observed by a scanning electron microscope, where the result indicates that the defocused irradiation time has a significant influence on the morphology changes. The reason for such changes is discussed based on the pretreatment effect and the confined plasma plume. As an application example, the microchannel is fabricated by a femtosecond laser combined with the defocused irradiation to demonstrate the advantage of the proposed method in fabricating functional structures.     

纳米颗粒透明分散体及其高性能有机无机复合材料

纳米颗粒分散是无机纳米材料在有机体系中应用的关键.本文提出了采用纳米颗粒液相分散体制备高度分散纳米透明有机无机复合材料的新方法,发明了超重力反应-萃取相转移方法制备纳米颗粒液相透明分散体技术,介绍了其制备原理和实施效果,以及其在纳米复合节能膜、纳米润滑油脂和高固含量光学材料等有机无机纳米复合材料中的最新研究进展.     

微波消解样品-火焰原子吸收光谱法测定焦炭灰中钾、钠含量

0.100 0g焦炭灰样品经氢氟酸-硝酸(1+3)溶液8mL消解,用火焰原子吸收光谱法测定其中钾和钠的含量。钾和钠的质量浓度分别在4mg.L-1及2mg.L-1以内与其吸光度呈线性关系,检出限(3σ)分别为12μg.L-1及6μg.L-1。方法用于分析焦炭灰标准物质,测定值与认定值相符,钾和钠的相对标准偏差(n=11)依次在2.7%～3.8%和1.3%～3.1%之间。     

两个4-连接配位网络的锌(Ⅱ)配位聚合物的合成、结构和荧光性质

以5-氨基四氮唑(HATz),异烟酸(HPyc)和ZnSO4·7H2O或Zn(NO3)2·6H2O为反应物,在DMF溶剂热条件下分别得到了2个锌(Ⅱ)配位聚合物{[(CH3)2NH2]·[Zn(ATz)(SO4)]}n(1)和{[Zn(ATz)(Pyc)]·0.5DMF}n(2),并对它们的组成和结构进行了表征。配合物1是由4-连接(4,4)网络拓扑的[Zn(ATz)(SO4)]nn-二维阴离子层和[(CH3)2NH2]+阳离子间通过氢键作用形成的二维波浪层结构。配合物2则是1个二重穿插的4-连接金刚烷拓扑的三维微孔金属-有机框架结构,客体DMF分子填充在孔道内。室温下的固体荧光实验表明,在350 nm的光激发下,配合物1和2分别在为445 nm和458 nm处出现强烈的荧光发射。     

高效液相色谱-四极杆/静电场轨道阱高分辨质谱法快速分析三子散的入血成分及代谢产物

蒙药三子散由诃子、川楝子、栀子3味药材等比例组成,其临床用药主要采用口服给药方式,药物在体内的吸收、分布、代谢、排泄过程与药物发挥药理作用和疗效的产生密切相关,因此考察灌胃给药后的入血成分有助于阐明三子散的药效物质基础。研究采用血清药物化学研究思路,将Wistar大鼠分成空白组和给药组,给药组给予三子散水提物,腹主动脉取血,离心制备血清样品,采用高效液相色谱-四极杆/静电场轨道阱高分辨质谱(HPLC-Q/Orbitrap HRMS),在SHIMADZU GIST C₁₈色谱柱(150 mm×4.6 mm, 5 μm)上进行色谱分离;以甲醇和0.1%(v/v)甲酸水溶液为流动相进行梯度洗脱,柱温30 ℃,流速0.5 mL/min,进样量10 μL,采用加热电喷雾电离(HESI)源,正、负离子同时扫描。通过比对三子散含药血清和空白血清的图谱差异,查阅数据库、各类成分体内代谢途径、三子散成分的相关文献,采用Xcalibur 3.0软件进行峰提取、峰匹配等质谱数据处理,结合Compound Discover 3.0软件对化合物代谢途径的预测分析和裂解规律的推断,解析三子散水提液经大鼠灌胃后血清中的原型成分和代谢产物。结果表明,在给药大鼠血清样品中鉴定出55种入血成分,其中41种原型成分,14种代谢产物。入血的原型成分主要为鞣质类、环烯醚萜类和小分子酚酸类。该研究较为全面地阐释了三子散水提液在大鼠血中的移行成分,有助于揭示三子散的药效物质基础,为该药的临床应用提供参考。     

“蓝瓶子”实验再探究*

利用SPSS 25.0统计软件对“蓝瓶子”实验进行正交实验设计,通过统计学分析得出最佳实验条件。利用氧化还原传感器(ORP)对“蓝瓶子”振荡体系的电极电势变化曲线进行分析,并针对蓝色的产生和消失过程设计3组对比实验深入探究,阐明其反应原理,意在引导学生深刻理解趣味实验现象背后的微观反应本质。