烘焙预处理对稻壳燃料品质及热解特性的调控机制研究

研究493–573 K惰性烘焙和有氧烘焙对稻壳元素构成、组分分布、芳香结构、孔隙结构、热解特性和反应动力学的影响规律。结果表明,烘焙温度对生物质燃料品质影响最为明显,氧化剂的加入可以增加生物质燃料品质对温度变化的敏感性。烘焙温度的升高促使生物质中含氧结构逐渐解离,当烘焙条件为573 K的烟气气氛时,样品的H/C和O/C比明显降低(0.188和0.259)。多种氧化剂能够协同调控生物质的官能团结构、活性芳香结构和孔隙结构,温度的升高促使稻壳中羟基减少、活性芳香结构占比逐渐降低和轻质挥发分的解离,在573 K烟气烘焙后活性结构占比达到最小值1.79、比表面积达到最大值295.78 m²/g。稻壳的热解动力学参数可以通过Coats-Redfern近似函数求解,烘焙可以有效提高生物质发生热解的温度和活化能(14.84→28.82 kJ/mol)。相较于惰性气氛和贫氧气氛,烟气气氛能够更加节能、高效地提高生物质的燃料品质和存储稳定性。     

基于支持向量回归机的空调逐时负荷滚动预测算法

针对当前空调负荷预测算法精度不高难以满足空调系统节能优化控制的问题,提出基于支持向量回归机(Support Vector Regression,SVR)的空调逐时负荷滚动预测算法,建立SVR滚动预测模型,模型参数采用网格搜索遍历算法进行寻优。为简化模型的复杂性,还对影响空调负荷的主要因素进行了相关性分析。此外,算法利用当日前1 h的滚动信息,不断对模型进行修正以提高负荷预测精度。最后探讨以期望误差为预测精度评价指标时,不同训练样本长度对神经网络和SVR算法预测精度的影响。预测结果表明:基于支持向量回归机的空调逐时负荷滚动预测算法较BP神经网络算法的预测精度提高10.3%,比常规支持向量回归机算法预测精度提高23.9%,训练样本较小时,算法预测性能更为优越。     

在电子冷却存在情况下HIRFL-CSR上观测到的束流不稳定现象

本文描述了冷却储存环运行过程中得到的一些Schottky信号和束流位置探测器上的信号,这些信号与束流的不稳定性有一定的关系,有些是由于硬件引起的,有些是束流本身产生的,分别给出了注入时、冷却后和冷却力测量过程中离子束中心频率随时间的变化,分析了产生这些现象的原因,尝试寻找解决的方法,以期提高束流的稳定性,为下一步Schottky质量测量实验做准备.     

HIRFL-CSR commissioning in 2006 and 2007

HIRFL-CSR, a new heavy ion cooler-storage-ring system at IMP, had been in commissioning since the beginning of 2006. In the two years of 2006 and 2007 the CSR commissioning was finished, including the stripping injection (STI), electron-cooling with hollow electron beam, C-beam stacking with the combination of STI and e-cooling, the wide energy-range synchrotron ramping from 7 MeV/u to 1000 MeV/u by changing the RF harmonic-number at mid-energy, the multiple multi-turn injection (MMI), the beam accumulation with MMI and e-cooling for heavy-ion beams of Ar, Kr and Xe, the fast extraction from CSRm and single-turn injection to CSRe, beam stacking in CSRe and the RIBs mass-spectrometer test with the isochronous mode in CSRe by using the time-of-flight method.     

A pilot experiment for mass measurement at CSRe

A pilot experiment of mass measurement was performed at CSRe with the method of isochronous mass spectrometry. The secondary fragments produced via RIBLL2 with the primary beam of 400 MeV/u ^36Ar delivered by CSRm were injected into CSRe. The revolution periods of the stored ions,which depend on the mass-to-charge ratios of the stored ions,were measured with a time-of-flight detector system. The results show that the mass resolution around 8×10^-6 for △m/m is achieved.     

HIAF-CRing 中的俘获加速效率研究(英文)

以HIAF-CRing上典型离子238U34+为研究对象,对其纵向俘获和加速的动力学过程进行了研究。累积后的粒子能量为800 MeV/u, 经过绝热俘获和加速后,粒子被加速至1 130 MeV/u。研究结果表明,通过选择适当的俘获时间、绝热参数以及相空间面积因子等参数,应用优化后的高频俘获加速曲线,可以获得更高的俘获和加速效率。通过粒子纵向动力学追踪软件ESME 上进行模拟,得到了优化后的高频相位、高频电压曲线,使得俘获效率达到99.3%,加速效率近乎100%。同时确定出了CRing 高频腔加速U34+ 所需满足的特性参数,即电压需达到40 kV,频率范围是0:31s0:34 MHz。To reduce the beam loss during the capture and acceleration processes of CRing in HIAF project, the longitudinal beam motion is investigated using the typical ion of 238U34+during the two processes mentioned above. The ions will be captured adiabatically firstly and then will be accelerated from 800 to 1130 MeV/u with a high efficiency using optimized RF voltage and RF phase program. After that the bunched beam will be debunched for the later beam compression. Simulation of these processes by tracking appropriate distributions with the longitudinal beam dynamics code ESME has been used tofind optimum parameters such as RF phase, RF voltage. The variation of the parameter during the RF cycle and the character parameters of the RF cavity are presented.      

重离子治癌装置4 MeV/u IH型漂移管直线注入器的动力学设计

基于KONUS束流动力学理论,完成了一台工作频率为162.5 MHz、占空比为1%的交叉指型漂移管直线注入器（IH-DTL）的动力学设计。该IH-DTL内置两套三组合四极透镜,共有41个加速单元,可为同步加速器提供流强400 eμA、能量4 MeV/u的C4+束流。在动力学设计过程中着重对每个加速间隙的同步能量偏差、注入相位和间隙电压等参数进行优化,使得该IH-DTL的横向归一化RMS接收度达到0.24 πmm·mrad,且横纵向归一化发射度增长小于10%,有利于提高同步环的注入效率。然后根据动力学设计的结构参数进行IH-DTL的高频仿真计算,将得到的三维电磁场分布导入PIC粒子跟踪程序中进行束流动力学模拟。动力学模拟结果显示,束流在IH-DTL出口的横向自然发射度小于13 πmm·mrad,达到了同步环的注入要求,而且在7%的垂直二极场分量下,束流中心的横向偏移在±0.5 mm以内,整体的束流传输效率高于99%。An interdigital H-mode drift tube linac (IH-DTL) with KONUS beam dynamic has been designed, which operation frequency was chosen 162.5 MHz. This IH-DTL consists of 41 accelerating cells and two quadrupole magnets triplets, can provide the C4+ with the current of 400 eμA and energy of 4 MeV/u for the synchrotron. In the beam dynamic design, the synchronous particle energy, inject RF phase and the acceleration voltage of each gap are optimized carefully to make the transverse normalized RMS acceptance of the IH-DTL to be 0.24 πmm·mrad and the beam emittance growth small than 10%. Then the RF structure was designed and the 3D electromagnetic field was imported into the PIC particle tracking code for the beam dynamic simulation. The transverse beam emittance at the exit of the IH-DTL is small than 13πmm·mrad which meets the injection requirement of the synchrotron. What is more, under the 7% vertical dipole fields component, the offset between the beam center and the drift tube's axis is ±0.5 mm at most. The transmission efficiency of the IH-DTL is higher than 99% for the whole beam in the acceptance.     

强流重离子加速器装置的增强器慢引出系统（英文）

中国科学院近代物理研究所承担的强流重离子加速器装置目前已进入了初步设计阶段。增强器作为该装置的主加速器,可利用双向涂抹技术将~(238)U~(35+)束的粒子数累积至1.0×10~(11),并将其从注入能量为17 MeV/u加速至高能量,引出能量的范围为200-835 MeV/u。为了提供s量级的准连续束以开展辐照实验,增强器中设计了慢引出系统,该系统将采用三分之一共振与RF-knockout的引出方法。同步加速器中有两种不同种类的六极磁铁,用于实现色品校正与共振驱动,并在设计中考虑了两者能同时运行并互不影响。针对增强器中不同引出能量的~(238)U~(35+)束,对其相应的稳定接受度模拟结果进行了比较,并给出了在引出静电偏转板处的光学匹配参数,这将为增强器中重离子束的慢引出及放射性次级束流分离器的入口光学设计提供重要的理论依据。     

Investigations of the dielectronic recombination of phosphorus-like tin at CSRm

The electron–ion recombination for phosphorus-like~(112) Sn~(35+)has been measured at the main cooler storage ring of the Heavy Ion Research Facility in Lanzhou, China, employing an electron–ion merged-beams technique. The absolute total recombination rate coefficients for electron–ion collision energies from 0 e V–14 e V are presented. Theoretical calculations of recombination rate coefficients were performed using the Flexible Atomic Code to compare with the experimental results. The contributions of dielectronic recombination and trielectronic recombination on the experimental rate coefficients have been identified with the help of the theoretical calculation. The present results show that the trielectronic recombination has a substantial contribution to the measured electron–ion recombination spectrum of~(112)Sn~(35+). Although a reasonable agreement is found between the experimental and theoretical results the precise calculation of the electron–ion recombination rate coefficients for M-shell ions is still challengeable for the current theory.     

BRing中电荷交换引起的束流损失分布模拟计算

在强流重离子加速器运行中,带电粒子与真空管道中的残余气体分子相互作用发生的电荷交换反应是影响重离子束流寿命的关键因素。这种电荷交换过程导致的束流损失将解吸出真空管壁上吸附的气体分子,进而引起真空压力的动态变化,将严重影响加速器的稳定运行和最终束流引出流强。中国科学院近代物理研究所将在广东省惠州市建造的强流重离子加速器装置（High Intensity heavy-ion AcceleratorFacility,简称HIAF）利用增强器（Booster Ring,简称BRing）提供束流流强高达2×1011 ppp的238U35+用于核物理及原子物理等实验研究。对强流重离子加速器BRing中238U35+束流发生电荷交换反应,损失一个电子成为238U36+的过程进行了追踪模拟,计算得到了U36+损失前的运动径迹和全环粒子损失位置分布,模拟结果显示U36+受到色散元件的影响,将集中损失在位于二极磁铁后的漂移节区域中。基于模拟结果,在束流损失位置处设计安装由低解吸率材料制作的准直器,优化设计后的准直效率高达95%以上;并模拟计算了有无准直器时真空压力和束流流强的变化,安装准直器后BRing的平均真空度变化小于10%,将确保BRing加速器的稳定运行。During heavy ion accelerator operation, the charge exchange effect between ions and residual gas molecules is the key factor to influence beam lifetime. The charge exchange process has ions lost on the wall and leads to a dynamical vacuum change, which will seriously affect the accelerator operation and reduce the extraction beam intensity. The Institute of Modern Physics' future project, called High Intensity heavy ion Accelerator Facility (HIAF), will be built in Huizhou city, Guangdong Province, China. The Booster Ring (BRing) will provide 2×11 ppp 238U35+ for nuclear physics experiments. This article studies the track of particle U36+ before impacting on the wall, which is the reference particle U35+ losing one electron, and gets the U36+ loss distribution along the BRing. The simulation result shows that U36+ will be influenced seriously by dispersion elements, and will be lost in the drift sections after the dipoles. Collimators made out of materials with low desorption will be installed in the particles lost positions. The collimator efficiency after optimization can be larger than 95%. It also shows BRing average pressure change and beam intensity change between collimators on and off. The result points out that the BRing average pressure change will be less than 10% with collimators on, which makes BRing operate stably.