散斑条纹的快速高精度处理技术

本文提出一种快速高精度散斑杨氏条纹(斑纹)场处理方法——同态阀值滤波法。用它实现了散斑场条纹的快速、逐点连续高精度处理。     

K2O-ZnO-Al2O3-B2O3-SiO2系掺Cr3+透明莫来石微晶玻璃的研究

采用了X射线衍射、透射电镜和吸收光谱及荧光光谱技术研究了K2O－ZnO-Al2O3-B2O3－SiO2系掺Cr^3 玻璃的析晶性能和光谱。研究结果表明：在K2O－Al2O3-B2O3-SiO2系掺Cr^3 玻璃的基础上引入ZnO后，析晶性能明显改善；析晶温度降低，析出的纳米莫来石微晶均匀、规则；微晶玻璃的发光强度明显增强。     

Reliability of Reinforced Concrete Buildings During Constructio

The safety analysis of reinforced concrete buildings during construction should be based on the comprehensive understanding of loads, load effects, structural resistance, and available safety index of the structure. This paper analyzes the characteristics and probabilistic models of resistance, loads, and load effects. A method was developed to calculate the probability of failure based on Monte Carlo simulation and models proposed in previous articles. Construction examples were used to analyze the influence of live load on the probability of failure. The results show that when the live load increases, the maximum probability of failure increases with acceleration. The results suggest that the construction live load should be carefully addressed during construction.     

甲基百里(香)酚蓝新负载树脂的特 性及应用

本文以金属指示剂甲基百里(香)酚蓝作为鳌合剂制得具有相应鳌合基团的负载树脂.研究了该树脂的某些分析特性及其在富集天然水中微量铜、钻、镍、锌中的应用.     

参数曲面保凸的一个定理

本文讨论了参数曲面的凸性，给出了参数曲面为凸的充要条件．并给出了具体的应用实例．     

剖宫产后再次开腹手术的临床资料分析

目的探讨刮宫产后产褥期再次开腹手术的指征、处理和结局。方法查阅2000-2006年在本院分娩患者的病历，对行刮宫产手术者，就其刮宫产指征、剖宫产术后再次开腹者手术指征、手术方式、刮宫产指征进行分析。结果2000-2006年在本院5132例分娩中，有1800例（35％）行剖宫产术。刮宫产术后有30例（1．6％）行再次开腹手术。主要指征包括：子宫收缩乏力6例（20％），胎盘附着处出血6例（20％），前腹壁裂开11例（38％）。30例再次开腹手术中，有5例（17％）是要求剖宫产者，有11例（38％）进行了子宫次全切或全切手术，有1例并发DIC，危及生命。结论严格控制剖宫产指征，手术过程中避免疏忽，从而避免再次开腹手术，减少合并症和孕产妇死亡。     

并行双回转光纤单元跑合过程中爬行现象浅析

并行双回转的爬行现象对高精度光纤定位是十分不利的.为了克服这种爬行现象,首先从动力学角度建立光纤爬行的动力学模型,论证了光纤爬行的实质是一种复杂的摩擦自激振动现象,然后结合实际跑合过程,从机械学的角度进一步分析获得传动齿轮安装偏斜、中心轴支撑同心不良、中心零定位弹簧片安装过紧和偏心消隙弹簧不能正常储能、释能是导致光纤爬行的根本原因,并对此提出了一些可行的解决措施,收到了良好的效果.     

双光子吸收效应对孤子和孤子对传输的影响

用分步傅立叶变换法求解含双光子吸收效应的光孤子NLS方程,研究了双光子吸收效应对一阶孤子和孤子对传输的影响,发现双光子吸收效应除对孤子产生等效损耗外,还影响了孤子对在传输中的相互作用。在特定的双光子吸收系数条件下双光子吸收效应可以使孤子对平行地向前传输。     

Collision-induced timing jitter in dispersion-managed WDM soliton system with filtering

Taking into account the randomicity of collision positions and the arbitrary encoding of data in channel,the influences of different dispersion management on collision-induced timing jitter in a filtered wavelength division multiplexing (WDM) soliton system are obtained statistically and numerically by applying a set of coupled ordinary differential equations which are derived through variational procedure. The optimal dispersion managements which can greatly reduce the collision-induced timing jitter are found. The multi-channel collision-induced timing jitters in a filtered WDM soliton system are given with an optimal dispersion management and constant dispersion.