溶胀后的弹性印章进行毛细微模塑

用溶胀后的聚二甲基硅氧烷弹性印章进行毛细微模塑,得到了聚苯乙烯丙酮溶液的微四方点阵图案．较少的PS溶液滴加量会造成孤立不相连的微点阵图形．同时还获得了由于在收缩过程中各部分溶剂挥发速度不一造成的特殊的微点阵图案．     

Formation of Interfacial Layers in LaAlO3/Silicon during Film Deposition

We have studied the interracial reactions between amorphous LaAlO3 thin films and Si substrates, using high- resolution transmission electron microscopy and x-ray photoelectron spectroscopy. It has been shown that the interracial layer between LaAlO3 film and Si substrate chemical states show that the ratio of La 4d3/2 to Al 2p is SiLaxAlyOz. The depth distributions of La, Si and Al of the interfacial layer remains unchanged with the depth compared to that of the LaAlO3 film. Moreover, the Si content, in the interracial layer gradually decreases with increasing thickness of the interracial layer. These results strongly suggest that the Al element is not deficient in the interracial layer, as previously believed, and the formation of a SiLaxAlyOz interracial layer is mainly due to the diffusion of Si from the substrate during the LaAlO3 film deposition. With the understanding of the interracial layer formation, ones can control the interface characteristics to ensure the desired performances of devices using high-k oxides as gate dielectrics.     

有压腔式吸热器复杂耦合换热机理数值研究

本文建立了有压腔式太阳能吸热器(PVSR)轴对称计算模型,运用蒙特卡罗光线追踪法(MCRT)模拟了二次聚光器(SC)与有压腔式吸热器(PVR)系统内聚光过程与光热转换过程,进而与计算流体与传热的有限容积方法(FVM)结合研究了高温高压吸热器内复杂耦合传热过程.在此基础上,进一步对比考察了考虑不同换热过程的换热机理,分析...     

An extended segment pattern dictionary for a pattern matching tracking algorithm at BESⅢ

A pattern matching based tracking algorithm, named MdcPatRec, is used for the reconstruction of charged tracks in the drift chamber of the BES detector. This paper addresses the shortage of segment finding in the MdcPatRec algorithm. An extended segment construction scheme and the corresponding pattern dictionary are presented. Evaluation with Monte-Carlo and experimental data show that the new method can achieve higher efficiency for low transverse momentum tra     

教学中物理学与数学的关系

物理学以实验为基础,具有质和量的统一性,而数学研究的是事物共有数量关系和空间形式,本文主要对物理学与数学的基本特征、求解物理问题的认知特点与认知过程、数学知识在物理问题求解中的功能等进行探讨,旨在深层次认识我们正在教和学的物理学与数学。     

粗糙度与气体稀薄性对微尺度流动特性的影响

对氮气和氦气在粗糙微通道以及光滑微通道内流动进行了阻力特性实验研究。实验结果表明,即使在较小的相对粗糙度高度下,由于微通道中的粗糙度分布密集,会极大地增加流动阻力,这是导致文献中微通道流动阻力系数实验值相互偏差的主要原因之一;而对于滑移区的气体流动,气体稀薄性使流动阻力明显减小而导致流量增加。     

尾式铁(Ⅲ)卟啉的合成及其光谱性质研究

合成了不同侧链长度的苯并咪唑基尾式卟啉及其Fe（Ⅲ）配合物。化合物经质谱、^1HMR、UVVisible、IR等表征，表明苯并咪唑基与卟啉环通过醚氧键和醚硫键相连。光谱学研究表明侧链较短不利于尾端基团的配位，长度对尾端基团的配位起着重要作用。     

线状锗等离子体X射线线谱的时间分辨测量

用自行研制的X射线条纹晶体谱仪首次测量了线状锗等离子体的X射线时间分辨谱。给出了类Ne-锗L线共振线的时间演化过程,并用类Ne-锗L线共振线与其双电子俘获伴线的相对强度比粗估了锗等离子体的电子温度及其随时间的变化,实验给出了X光激光增益区介质的电子温度为400～760eV,同时给出了电子温度保持相对恒定的时间不小于90ps(电子温度变化小于2％)。     

板条固体激光器热稳特性的研究

本文报道板条激光器的热稳运行,在150W至10000W的泵浦功率下输出发散角基本保持不变,最大输出功率大于150W;并绘出了腔内插入柱面镜,以压缩输出激光发散角的初步结果.     

GGG晶体板状激光器特性的研究

测试GGG晶体板条的激光性能,并在高功率泵浦下对板条的热聚焦效应进行了研究.