空穴阻挡中间层的加入对WOLEDs光谱稳定性的提高

制备了多层结构合成的白光有机电致发光器件(WOLEDs),通过在发光层中加入一层空穴阻挡层TPBi来提高器件的光谱稳定性。当TPBi厚度为2.5 nm时,在电压由8 V升高到12 V的过程中,CIE色坐标的变化量为(0.031,0.006)。器件的电流效率为24.7 cd/A,外部量子效率最大为8.2%。相对于没有加入中间层的器件,8 V电压下的色坐标由(0.435,0.472)变为(0.333,0.439)。实验结果表明,在发光层中添加中间层可以改变器件发光的色坐标并提升光谱的稳定性。     

有机电致发光器件中新型芴类小分子材料的光谱特性

针对新型芴类小分子材料6,6′-(9H-fluoren-9,9-diyl)bis(2,3-bis (9,9-dihexyl-9H-fluoren-2-yl) quinoxaline) (BFLBBFLYQ)和空穴传输材料N,N′-biphenyl-N,N′-bis-(3-methylphenyl)-1, 1′-biphenyl-4,4′-diamine(TPD)及二者混合体系的荧光光谱和吸收光谱进行了测试表征,制备了结构为indium-tin oxide (ITO)/BFLBBFLYQ∶TPD/Alq/Mg∶Ag的双层有机电致发光器件。研究发现,BFLBBFLYQ∶TPD混合薄膜存在一个不同于单独分子薄膜的低能量发射光谱,发光峰在530 nm处,与tris(8-hydroxyquinolinato)aluminum(Alq)薄膜的荧光光谱相同,亦与结构为BFLBBFLYQ∶TPD/Alq双层器件的电致发光光谱相同。鉴于荧光染料4-(dicyanomethylene)-2-tert-butyl-6(1,1,7,7-tetramethyljulolidyl-9-enyl) -4H-pyran(DCJTB)的吸收光谱与Alq的荧光光谱有很好的重叠,利用Forster能量传递理论,将DCJTB红色染料引入双层器件,通过调节掺杂位置,考察器件的发光光谱情况,进而对BFLBBFLYQ∶TPD/Alq双层器件的载流子复合区域进行了研究。结果表明,双层器件的载流子复合区域位于BFLBBFLYQ∶TPD/Alq界面附近的Alq层内。     

Improving efficiency of inverted perovskite solar cells via ethanolamine-doped PEDOT:PSS as hole transport layer

In order to fabricate high-performance inverted perovskite solar cells (PeSCs), an appropriate hole transport layer (HTL) is essential since it will affect the hole extraction at perovskite/HTL interface and determine the crystallization quality of the subsequent perovskite films. Herein, a facile and simple method is developed by adding ethanolamine (ETA) into poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as HTL. The doping of a low-concentration ETA can efficiently modify the electrical properties of the PEDOT:PSS film and lower the highest occupied molecular orbital (HOMO) level, which is more suitable for the hole extraction from the perovskite to HTL. Besides, ETA-doped PEDOT:PSS will create a perovskite film with larger grain size and higher crystallinity. Hence, the results show that the open-circuit voltage of the device increases from 0.99 V to 1.06 V, and the corresponding power conversion efficiency (PCE) increases from 14.68% to 19.16%. The alkaline nature of ethanolamine greatly neutralizes the acidity of PEDOT:PSS, and plays a role in protecting the anode, leading the stability of the devices to be improved significantly. After being stored for 2000 h, the PCE of ETA-doped PEDOT:PSS devices can maintain 84.2% of the initial value, which is much higher than 67.1% of undoped devices.     

基于叠栅条纹的光刻对准理论分析及标定方法

在线光栅用于纳米光刻对准理论的基础上,为实现光栅方向的标定和掩模硅片对准,提出一种利用相位斜率消除角位移的新方法,并给出线光栅标记及其对准原理。在对准前,掩模对准标记和硅片对准标记存在角位移,重点讨论了此种情况下叠栅条纹的特性以及与光栅物理参数的关系,并给出了相应的计算公式。基于傅里叶频域分析法,对叠栅条纹频率成分与条纹的关系做了简要分析。利用提取叠栅条纹行列方向的一维相位,通过数据拟合,得出了相位斜率与角位移的内在关系,实现了条纹方向的标定。模拟实验结果表明,该方法简单可靠,可分辨的最小角位移低于0.02°。     

Enhancement of Frster energy transfer from thermally activated delayed fluorophores layer to ultrathin phosphor layer for high color stability in non-doped hybrid white organic light-emitting devices

Fluorescence/phosphorescence hybrid white organic light-emitting devices(WOLEDs) based on double emitting layers(EMLs) with high color stability are fabricated.The simplified EMLs consist of a non-doped blue thermally activated delayed fluorescence(TADF) layer using 9,9-dimethyl-9,10-dihydroacridine-diphenylsulfone(DMAC-DPS) and an ultrathin non-doped yellow phosphorescence layer employing bis[2-(4-tertbutylphenyl)benzothiazolato-N,C2']iridium(acetylacetonate)((tbt)_2Ir(acac)).Two kinds of materials of 4,7-diphenyl-1,10-phenanthroline(Bphen) and 1,3,5-tris(2-Nphenylbenzimidazolyl) benzene(TPBi) are selected as the electron transporting layer(ETL),and the thickness of yellow EML is adjusted to optimize device performance.The device based on a 0.3-nm-thick yellow EML and Bphen exhibits high color stability with a slight Commission International de l'Eclairage(CIE) coordinates variation of(0.017,0.009) at a luminance ranging from 52 cd/m~2 to 6998 cd/m~2.The TPBi-based device yields a high efficiency with a maximum external quantum efficiency(EQE),current efficiency,and power efficiency of 10%,21.1 cd/A,and 21.3 lm/W,respectively.The ultrathin yellow EML suppresses hole trapping and short-radius Dexter energy transfer,so that Forster energy transfer(FRET)from DMAC-DPS to(tbt)_2Ir(acac) is dominant,which is beneficial to keep the color stable.The employment of TPBi with higher triplet excited state effectively alleviates the triplet exciton quenching by ETL to improve device efficiency.     

基于新型空穴传输材料的有机电致发光器件的研究

利用真空蒸镀方法以N2,N7-二(间甲苯胺基)-N2,N7-二苯基-2,7-二胺基-9,9-二甲基芴[2,7-bis(pmethoxyphenyl-m'-tolylamino)9,9-dimethylfluorene,TPF-OMe]为空穴传输层、8-羟基喹啉铝[tris(8-hydroxyquinolinato)aluminum,Alq3)]作为发光层及电子传输层,制备了双层器件.与制作的典型双层结构N,N'-二苯基-N,N'-二(3-甲基苯基)-1,1'-联苯-4,4'-二胺[N,N'-biphenyl-N,N'-bis-(3-methylphenyl)-1,1'-biphenyl-4,4'diamine,TPD/Alq3]器件相比,电流密度较大,发光效率低,发光谱峰为516 nm,色坐标为(0.30,0.53),为Alq3材料发光.以TPF-OMe为发光层兼空穴传输层,2,9-二甲基-4,7-二苯基-1,10-菲罗啉(2,9-dimethyl-4,7-diphenyl-l,10-phenanthroline,bathocuproine或BCP)为空穴阻挡层,Alq3为电子传输层,制作三层有机电致发光器件.结果表明,光谱峰值在414 nm,色坐标为(0.20,0.24),为蓝色光,是TPF-OMe材料本身发光,器件在15 V电压下电流密度为1137 mA/cm2,亮度为900 cd/m2,在3 V偏压下有最大流明效率,为0.11 lm/W.基于TPF-OMe材料的器件的击穿温度比基于TPD材料的器件高近20℃,原因可能在于TPF-OMe材料比TPD材料高19℃的玻璃化转变温度(Tg).     

High performance pentacene organic field-effect transistors consisting of biocompatible PMMA/silk fibroin bilayer dielectric

Pentacene organic field-effect transistors （OFETs） based on single- or double-layer biocompatible dielectrics of poly（methyl methacrylate） （PMMA） and/or silk fibroin （SF） are fabricated. Compared with those devices based on sin- gle PMMA or SF dielectric or SF/PMMA bilayer dielectric, the OFETs with biocompatible PMMA/SF bilayer dielectric exhibit optimal performance with a high field-effect mobility of 0.21 cm2/Vs and a current on/off ratio of 1.5 × 104. By investigating the surface morphology of the pentacene active layer through atom force microscopy and analyzing the elec- trical properties, the performance enhancement is mainly attributed to the crystallization improvement of the pentacene and the smaller interface trap density at the dielectric/organic interface. Meanwhile, a low contact resistance also indicates that a good electrode/organic contact is formed, thereby assisting the performance improvement of the OFET.     

基于NPB的蓝色有机电致发光器件的制备和表征

在常规的双层绿色有机电致发光器件氧化铟锡(ITO)/N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine(NPB)/8-hydroxyquinolinealuminum(Alq3)/Mg∶Ag的基础上,通过选择适当的空穴阻挡层材料,制备得到以NPB为发光层的蓝色发光器件,其结构为ITO/NPB/bathocuproine(BCP)/Alq3/Mg∶Ag,其最大亮度和最大流明效率分别达到2900cd/m2和0.55lm/W。电致发光谱峰位于445nm,CIE色坐标为(x=0.16,y=0.09),且二者都不随外加电压而变化;利用各功能层的能级结构,对不同结构的器件性能差异进行了分析。     

导电聚合物有序超薄膜的合成及其作为有机电致发光器件空穴注入层

采用修饰多层LB膜的方法制备了导电聚合物聚-3,4-乙烯二氧噻吩/二十烷酸(PEDOT:AA)复合层状有序膜, 构筑了一种导电聚合物镶嵌的多层有序膜结构. 将这种导电聚合物有序薄膜沉积于ITO电极表面, 将其作为有机电致发光二极管(OLED)的空穴注入层, 并研究了ITO/(PEDOT:AA)/MEH-PPV/Al器件的性能. 研究结果表明, 与采用聚3,4-乙烯二氧噻吩/聚苯乙烯磺酸(PEDOT:PSS)自组装膜和旋涂膜作为空穴注入层的ITO/(PEDOT:PSS)/MEH-PPV/Al器件相比, 器件的发光效率增加, 起亮电压降低. 我们认为这是由于PEDOT:AA薄膜提供了一种有序层状结构后, 减小了ITO与MEH-PPV间的接触势垒, 改善了空穴载流子注入效率. 进一步的研究表明, 由于PEDOT:AA多层膜间靠较弱的亲水、疏水作用结合, 这种导电多层有序膜的热稳定性与普通LB膜相似, 在较高温度下发生从层状有序态到无序态的变化, 这是导致OLED器件性能发生劣化的主要原因.     

NPB厚度对异质结OLED载流子复合区域的调控

通过调控p型半导体N,N′-bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine(NPB)层的厚度,制备了结构为ITO/NPB/aluminum(Ⅲ)bis(2-methyl-8-quinolinato)-4-phenylphenolate(BAlq)/NPB(0~18nm)/tri-(8-hydroxyquinoline)-aluminum(Alq₃)/Mg:Ag的多层有机电致发光器件.分析结果表明,在该类异质结器件中,NPB不仅可以作为空穴传输材料,在适当的厚度范围内,它还可以起到调控载流子复合区域的作用;当NPB厚度在0~18nm之间变化时,随着其厚度增加器件发光颜色可由蓝色变为绿色.通过器件发光光谱的表征可以得知,器件的载流子复合区域相应地由BAlq层转移至Alq₃层.