原位TiC颗粒增强灰铸铁复合材料的组织及其摩擦磨损性能

采用原位反应铸造法制备了TiC颗粒增强灰铸铁复合材料,并考察了复合材料的组织、力学性能和摩擦磨损性能．结果表明：随着合金熔体中Ti含量增加,复合材料中TiC颗粒的数量增加,尺寸减小,而石墨的数量降低,且其形态由片状转化为点状;含有大量TiC颗粒及少量点状石墨的复合材料的力学性能和耐磨性优良,即使在较高载荷下,复合材料中的TiC颗粒和点状石墨仍具有协同减摩抗磨作用,从而使得复合材料的摩擦磨损性能优于普通灰铸铁．     

关于第14届材料磨损国际会议的简要评述

对第14届材料磨损会议重点涉及的生物摩擦学、金属磨损、表面涂层、冲蚀、纳米摩擦学、复合材料以及磨损监测等研究领域的最新进展进行了评述，对摩擦学领域今后的研究重点进行了展望．     

JAHN-TELLER EFFECT AND SUPERCONDUCTING MECHANISM OF THE HOLE-DOPED C60 SOLID

A possible superconducting mechanism of the hole-doped C₆₀ solid is discussed. Under the assumption that the superconductivity results from the strong coupling between electrons at Fermi surface and intramolecular vibrations, a simple expression for the electron-phonon coupling parameter λ is derived. The related transition temperature is estimated and can be much greater than that of the alkali-metal-doped C₆₀ solid.     

热漏对内可逆卡诺循环性能的影响

本文在内可逆卡诺循环的基础上，进一步讨论热漏对循环的影响。结果表明，考虑热漏很有意义，可使循环的功率－效率特性与实际热机的观测性能相符，并可得到一些更为精确的新结论。     

JAHN-TELLER EFFECT AND SUPERCONDUCTING MECHANISM OF THE HOLE-DOPED C60 SOLID

A possible superconducting mechanism of the hole-doped C₆₀ solid is discussed. Under the assumption that the superconductivity results from the strong coupling between electrons at Fermi surface and intramolecular vibrations, a simple expression for the electron-phonon coupling parameter λ is derived. The related transition temperature is estimated and can be much greater than that of the alkali-metal-doped C₆₀ solid.     

参量放大器腔中光力诱导透明与本征模劈裂性质

研究了在含有光学参量放大器的光力学腔中关于弱探测光的光力诱导透明与本征模劈裂的性质.研究发现,光学参量放大器的驱动场相位和非线性增益值的大小对光力诱导透明窗口宽度和本征模劈裂性质有非常重要的影响,特别是当控制光频率工作在光力学红边带下,通过适当调制相位和非线性增益可以实现比空腔时(没有光学参量放大器时)还狭窄的光力诱导透明窗口,此时伴随着陡峭的色散曲线.这些研究结果有利于在光力耦合系统中实现快慢光、光存储等量子信息处理过程.     

Measuring Loschmidt echo via Floquet engineering in superconducting circuits

The Loschmidt echo is a useful diagnostic for the perfection of quantum time-reversal process and the sensitivity of quantum evolution to small perturbations. The main challenge for measuring the Loschmidt echo is the time reversal of a quantum evolution. In this work, we demonstrate the measurement of the Loschmidt echo in a superconducting 10-qubit system using Floquet engineering and discuss the imperfection of an initial Bell-state recovery arising from the next-nearest-neighbor (NNN) coupling present in the qubit device. Our results show that the Loschmidt echo is very sensitive to small perturbations during quantum-state evolution, in contrast to the quantities like qubit population that is often considered in the time-reversal experiment. These properties may be employed for the investigation of multiqubit system concerning many-body decoherence and entanglement, etc., especially when devices with reduced or vanishing NNN coupling are used.     

基于衍射理论的哈达玛编码光谱成像数据重构

哈达玛变换光谱成像技术是一种在不牺牲分辨率的情况下,通过多通道复用的方法增加光学系统光通量,使得系统信噪比显著高于传统成像的新型计算光谱成像技术.本文针对系统成像过程中数字微镜器件衍射造成的图像降质问题,建立了基于标量衍射理论的哈达玛编码光谱成像图谱数据退化模型,提出以Lucy-Richardson (L-R)算法为核心的重构数据修正算法,提高重构数据立方体的图像质量和光谱精度.通过对成像过程的模拟和重构算法的仿真实验,数字化生成了系统成像衍射降质的物理过程,并验证了本文所采用修正方法的有效性.经过L-R修正之后的复原数据立方体的光谱角距离评价结果为0.1296,图像相似度评价因子优于0.85,相比修正前的重构数据质量有较大提升,表明算法对哈达玛编码光谱成像数据的重构及修正具有较好的效果.     

亚波长尺度下混合等离子泄漏模式激光

由于光存在衍射极限,因此传统方法不能实现亚波长尺度下的激光激射.为了打破这一衍射极限,本文设计了金属-介电层-半导体堆叠结构来实现深亚波长尺度下的激光激射,并讨论了相关结构对模式传播的影响.结构设计上,采用低介电常数金属银作为衬底、10?nm厚的LiF作为介电层、具有六边形截面的半导体纳米线ZnO作为高介电常数层,采用...     

C离子束诱变产生甜高粱汁酒精酵母高产菌株的研究

利用100 MeV/u C离子束对高产酒精酵母菌株进行了辐照诱变的研究。 采用红四氮唑作为筛选指示剂, 得到了5株产酒能力有所提高的突变酵母菌。 利用甜高粱汁的发酵结果表明, T4突变菌株的产酒精能力比原始出发菌株提高了18.6%, 且发酵液中的残糖含量也有所降低。 随后对T4菌株在甜高粱汁中的最适宜发酵条件做了初步探索, 结果表明: 最适发酵温度和pH值分别为30 ℃和4.5。 通过10 l发酵罐的验证试验表明: 在同样发酵条件下, T4菌株的发酵率和产酒精能力都比原始出发菌株提高了12%。 Five mutants with high ability of producing alcohol were selected out by using TTC as an indicator after irradiation of the alcohol yeast with 100 MeV/u carbon ions. The fermentation experiment in sweet sorghum juice showed that the alcohol production ability of mutant T4 strain increased 18.6% compared to the control strain. The residual sugar content in the juice was decreased too. After that, the optimum fermentation conditions of the T4 strain in sweet sorghum juice were investigated. The results showed that the optimum temperature and pH value for fermentation were 30 ℃ and 4.5, respectively. The verification experiment was fermented in a 10 l bio reactor and the obtained data indicated that the fermentative rate and the ability of producing alcohol in T4 strain was higher than that in the control strain under the same fermentation condition.