Surface properties of sensors based on aminophenol-polymerized film

In this work, carbon electrodes modified with aminophenols were developed for the production of pesticides biosensors based on acetylcholinesterase. The polymers were potentiodynamically deposited on a graphite electrode surface by the oxidation of monomers, 2-aminophenol, 3-aminophenol and 4-aminophenol. The electrochemical behaviour and surface analysis of the electrodes modified by polyaminophenols non-immobilized and immobilized on acetylcholinesterase were studied by cyclic voltammetry, electrochemical impedance spectroscopy and atomic force microscopy. Roughness values obtained for graphite electrodes modified with poly(4-aminophenol) and poly(4-aminophenol)/acetylcholinesterase were 174 and 86 nm, respectively. The acetylcholinesterase enzyme was immobilized on a graphite and a graphite modified with poly(4-aminophenol), and these electrodes were coupled in the flow system. Potentiometric response due to hydrogen ions generated by an enzymatic system in the presence of acetylcholine chloride substrate was evaluated. The results showed that the graphite/poly(4-aminhophenol) sensor presents high sensitivity to hydrogen ions when compared with other graphite/polyaminophenols sensors. The biosensor coupled in a continuous flow system was employed for the detection of dichlorvos. The detection and quantification limits were 0.8 and 2.4 μmol L⁻¹ dichlorvos, respectively. This sensor reveals an efficient and promising material for biomolecules immobilization.     

Structure and hydrolysis of the U(IV), U(V), and U(VI) aqua ions from ab initio molecular simulations

Ab initio molecular dynamics simulations at 300 K, based on density functional theory, are performed to study the hydration shell geometries, solvent dipole, and first hydrolysis reaction of the uranium(IV) (U(4+)) and uranyl(V) (UO(2)(+)) ions in aqueous solution. The solvent dipole and first hydrolysis reaction of aqueous uranyl(VI) (UO(2)(2+)) are also probed. The first shell of U(4+) is coordinated by 8-9 water ligands, with an average U-O distance of 2.42 ?. The average first shell coordination number and distance are in agreement with experimental estimates of 8-11 and 2.40-2.44 ?, respectively. The simulated EXAFS of U(4+) matches well with recent experimental data. The first shell of UO(2)(+) is coordinated by five water ligands in the equatorial plane, with the average U═O(ax) and U-O distances being 1.85 ? and 2.54 ?, respectively. Overall, the hydration shell structure of UO(2)(+) closely matches that of UO(2)(2+), except for small expansions in the average U═O(ax) and U-O distances. Each ion strongly polarizes their respective first-shell water ligands. The computed acidity constants (pK(a)) of U(4+) and UO(2)(2+) are 0.93 and 4.95, in good agreement with the experimental values of 0.54 and 5.24, respectively. The predicted pK(a) value of UO(2)(+) is 8.5.     

Lithium storage mechanisms and effect of partial cobalt substitution in manganese carbonate electrodes

A promising group of inorganic salts recently emerged for the negative electrode of advanced lithium-ion batteries. Manganese carbonate combines low weight and significant lithium storage properties. Electron paramagnetic resonance (EPR) and magnetic measurements are used to study the environment of manganese ions during cycling in lithium test cells. To observe reversible lithium storage into manganese carbonate, preparation by a reverse micelles method is used. The resulting nanostructuration favors a capacitive lithium storage mechanism in manganese carbonate with good rate performance. Partial substitution of cobalt by manganese improves cycling efficiency at high rates.     

Optimization of the photocatalytic activity of CdO + CdTiO3 coupled oxide thin films obtained by sol-gel technique

In the preparation of CdO + CdTiO₃ polycrystalline thin films by the sol-gel method, the optical, structural and crystalline properties, as well as the photocatalytic activity (PA) depends strongly on the sintering temperature (Ts) of the films and of the Ti/Cd ratio used in the precursor solution. In this work, CdO + CdTiO₃ thin films were prepared using a Ti/Cd constant ratio in the precursor solution. The films were sintered at six different Ts in the 450-550 °C range, in an open atmosphere. The structure of the films was characterized by X-ray diffraction and the PA was evaluated by the photobleaching of methylene blue in an aqueous solution using a UV-vis spectrometer. The relative intensity of the diffraction peaks associated with CdO and CdTiO₃, change with the Ts. The better photocatalytic activities were obtained for the films sintered at 490 °C and 550 °C. When the CdO was removed from the films by chemical etching the PA decreased, showing the importance of coupling both oxides.     

Velocity map imaging and theoretical study of the Coulomb explosion of CH3I under intense femtosecond IR pulses

The Coulomb explosion of CH(3)I in an intense (10-100 TW cm(-2)), ultrashort (50 fs) and nonresonant (804 nm) laser field has been studied experimentally and justified theoretically. Ion images have been recorded using the velocity map imaging (VMI) technique for different singly and multiply charged ion fragments, CH(3)(p+) (p = 1) and I(q+) (q ≤ 3), arising from different Coulomb explosion channels. The fragment kinetic energy distributions obtained from the measured images for these ion fragments show significantly lower energies than those expected considering only Coulomb repulsion forces. The experimental results have been rationalized in terms of one-dimensional wave packet calculations on ab initio potential energy curves of the different multiply charged species. The calculations reveal the existence of a potential energy barrier due to a bound minimum in the potential energy curve of the CH(3)I(2+) species and a strong stabilization with respect to the pure Coulombic repulsion for the higher charged CH(3)I(n+) (n = 3, 4) species.     

Fast counter-electroosmotic capillary electrophoresis–time-of-flight mass spectrometry of hyaluronan oligosaccharides

Fast capillary electrophoresis–mass spectrometry measurements under counter-electroosmotic analyte migration conditions are presented. Efficient separations of a homologous series of six hyaluronan oligosaccharides (comprising 1–6 hyalobiuronic acid moieties) could be completed in 65 s. Separations were achieved in short-length fused silica capillaries under high electric field strengths of up to 1.25 kV·cm⁻¹. Capillary inner diameters ranging from 5 to 50 μm were investigated, resulting in an optimal value of 15 μm. The influence of capillary dimensions and buffer composition on separation efficiency and sensitivity are discussed. Optimal separations were achieved using a 28 cm × 15 μm capillary, a separation high voltage of 35 kV, a background electrolyte of 25 mM ammonium acetate adjusted to pH 8.5, and negative ionization mode. The optimized method was successfully applied to a bovine testicular hyaluronidase digest of hyaluronan. Only minimal sample pretreatment for protein-containing samples is required. The simple manual injection procedure and fast separations allow for a sample throughput of 35 samples per hour.     

Syntheses, structural and spectroscopic characterization of novel zinc(II)-bis(trithiocarbimato) complexes and bis(N-methylsulfonyldithiocarbimate)-sulfide

Four zinc(II)-bis(trithiocarbimato) complexes with the general formula A₂[Zn(RSO₂NCS₃)₂] [A = Ph₄P⁺: R = CH₃ (1), 4-CH₃C₆H₄ (2); A = Bu₄N⁺: R = CH₃ (3), 4-CH₃C₆H₄ (4)] were obtained by the reaction of sulfur with the correspondent zinc(II)-bis(dithiocarbimato) complexes. Additionally, the compound (Ph₄P)₂[(CH₃SO₂NCS₂)₂S)] (5) was prepared from the potassium methylsulfonildithiocarbimate by oxidation with iodine. The compounds were characterized by elemental analyses and IR, ¹H NMR and ¹³C NMR spectroscopies. The compounds 4 and 5 were also characterized by X-ray diffraction techniques. The compound 4 crystallizes in the centrosymmetric space group C2/c of the monoclinic system. The Zn(II) is in a distorted tetrahedral environment (ZnS₄) in compound 4, and differ from the coordination mode observed in compound 1, which involves one sulfur and one nitrogen atom of each trithiocarbimate ligand. Compound 5 is the first example of a compound containing a bis(N-alkylsulfonyldithiocarbimate)-sulfide dianion and crystallises in the non-centrosymmetric space group P4₁2₁2 of the tetragonal system.     

Three-dimensional triazenido layers attained through classical and non-classical hydrogen interactions and its coordination to palladium under prolific occurrence of bifurcated hydrogen bonding

The new ligand 1,3-bis(3-methoxy-4-methylbenzoate) triazene (1, bmmbt), and the already known ligand 1,3-bis(4-acetylphenyl)triazene (bapht), yield the two new palladium(II) complexes [(bmmbt)Pd(PPh₃)₂Cl]·DMSO (2) and [(bapht)Pd(PPh₃)₂Cl] (3) (Ph = phenyl; DMSO = dimethylsulfoxide). Compound 1 shows the existence of more than one interaction promoting the coupling between the triazene chains. Other remarkable types of interactions in 1 are bifurcated hydrogen contacts and non-classical CH···π bonding. Complexes 2 and 3 present a planar geometry, supported also through bifurcated intramolecular Cl···H-C interactions, as well as the occurrence of trifurcated Cl···H-C intermolecular interactions.     

Theoretical investigation on electron scattering by benzene in the intermediate-energy range

We present a theoretical investigation on electron scattering by benzene (C₆H₆) in the intermediate-energy range. Calculated elastic differential, integral, and momentum-transfer as well as total (elastic + inelastic) and total absorption cross sections are reported for impact energies ranging from 20 to 500 eV. A complex optical potential is used to represent the electron-molecule interaction dynamics. A theoretical method based on the single-center-expansion close-coupling framework and corrected by the Padé approximant [F.A. Gianturco, R.R. Lucchese, N. Sanna, J. Chem. Phys. 102 (1995) 5743] is used to solve the scattering equations. The comparison of our calculated results with the experimental and theoretical data available in the literature is encouraging.