Simple Nd:YAG laser generates vector and vortex beam

We report a simple Nd:YAG laser that emits radially polarized beam with helical wavefront. The laser cavity consists of a piece of laser crystal and a plane output coupler, and there is no additional polarization component inside it. The pump light is converted into annular profile through de-focal coupling into a multi-mode fiber. For the continuous-wave(CW) operation, the laser emits radially polarized vortex beam, and it is observed that the helical wavefront of the laser beam is switched from right handedness to left handedness when the output coupler is tilted slightly. For the Q-switched operation under the insertion of a Cr4t:YAG saturable absorber inside the cavity, we obtain radially polarized outputs with left-handedness helical wavefront. By tilting the laser crystal slightly, the laser output switches to azimuthal polarization at pump power larger than 4.5 W and left-handedness helical wavefront of laser beam is preserved.     

Frequency-locking and threshold current-lowering effects of a quantum cascade laser and an application in gas detection field

In this paper,the frequency-locking and threshold current-lowering effects of a quantum cascade laser are studied and achieved.Combined with cavity-enhanced absorption spectroscopy,the noninvasive detection of H_2 with a prepared concentration of 500 ppm in multiple dissolved gases is performed and evaluated.The high frequency selectivity of 0.0051 cm~(-1) at an acquisition time of 1 s allows the sensitive detection of the(1-0) S(l) band of H_2 with a high accuracy of(96.53±0.29)%and shows that the detection limit to an absorption line of 4712.9046 cm~(-1) is approximately(17.26±0.63) ppm at an atmospheric pressure and a temperature of 20 ℃.     

灌浆理论浅析

详细分析了两种灌浆液体的类型牛顿体和宾汉姆体的力学特征以及二者之间异同和联系,介绍了岩土体结构的基本理论、灌浆的基本理论、渗透灌浆理论机制及内容、劈裂灌浆理论机制及内容、压密灌浆理论机制及内容。     

Hydroxo-Lanthanide Cluster Organic Framework Built by Hexanuclear Cluster Units

A novel hydroxo-lanthanide cluster organic framework, Sm₃L₈(μ ₃-OH)(H₂O)·H₂O (1), derived from the 4-pyridin-4-ylbenzoic acid (HL) has been hydrothermally made and structurally characterized by single crystal X-ray diffraction. Structure analysis shows the hexanuclear Sm₆ cluster unit is composed of inorganic tetranuclear hydroxo [Sm₄(OH)₂]¹⁰⁺ (Sm₄) cluster and dimeric [Sm₂(COO)₄]²⁺ (Sm₂) core. The Sm₆ cluster units are connected by L ligands to form a 2D Ln-based cluster organic framework. From the topological point of view, the layer architecture can be described as 4-connected sql net. Furthermore, the elemental analysis, PXRD, IR and TGA are also studied.     

Development and Investigation of a Mesh-Electrode Linear Ion Trap (ME-LIT) Mass Analyzer

A mesh-electrode linear ion trap (ME-LIT) mass analyzer was developed and its performance was primarily characterized. In conventional linear ion trap mass analyzers, the trapped ions are mass-selected and then ejected in a radial direction by a slot on a trap electrode. The presence of slots can strongly affect the electric field distribution in the ion trapping region and distort the mass analysis performance. To compensate for detrimental electric field effects, the slot is usually designed and fabricated to be as small as possible, and also has very high mechanical accuracy and symmetry. A ME-LIT with several mesh electrodes was built to compensate for the effects caused by slots. Each mesh electrode was fabricated from a plate electrode with a relatively large slot and the slot was covered with a conductive mesh. Our preliminary experimental results show that the ME-LIT could considerably diminish the detrimental electric field effects caused by slots, and increase the mass resolving power and ion detection efficiency. Even with 4-mm-wide slots, a mass resolution in excess of 600 was obtained using the ME-LIT. Mass resolution could be remarkably improved using mesh electrodes in ion traps with asymmetric electrodes. The stability diagram of the ME-LIT was mapped, and highly efficient tandem mass spectrometry was demonstrated. The ME-LIT was qualified as a LIT mass analyzer. The ME-LIT can improve the mass resolution and decrease the requirements of mechanical accuracy and symmetry of slots, so it shows potential for a wide range of practical uses.

Morphological transformations of nonequilibrium assemblies of amphiphilic diblock copolymer

Amphiphilic diblock copolymer polystyrene-block-poly(ethylene oxide) (PS-PEO) assembled into nonequilibrium bicontinuous structures or mixture of vesicles, bilayers and nanorods upon rapid micellization induced by rapid addition of selective solvent (water) into the PS-PEO solutions in a common solvent (dimethyl formamide) with different concentrations. These kinetically trapped assemblies were unstable and slowly evolved into thermodynamically favorable spheres and vesicles. The addition of non-ionic surfactant Pluronic P123 upon rapid micellization generated novel nanocages and flower-like vesicles. The nanocages spontaneously transformed into tubules capped with vesicles. These novel assemblies are beyond the classic phase diagram of block copolymer self-assemblies, especially for those primarily based on thermodynamics.     

Experimental and kinetic investigation of the pyrolysis,combustion, and gasification of deoiled asphalt

The pyrolysis, combustion, and gasification behaviors of deoiled asphalt were studied by a thermogravimetric analyzer and the kinetics were also analyzed using a multi-stage first-order integral model. All the experiments were conducted at non-isothermal conditions with heating rates range of 10–40 K min^?1 under N₂ (pyrolysis), air (combustion), or CO₂ (gasification) atmosphere, respectively. The results showed that, for pyrolysis, the reaction mainly occurred between 498 and 798 K and could be divided into two stages: the first was caused by the volatilization of small molecules and the second probably due to the cracking reactions. For combustion, the mass loss process could be divided into three stages: the devolatilization and oxidation first, the ignition and combustion of the volatiles second, and finally the combustion of the formed char. Under CO₂ atmosphere, the mass loss behavior was similar with that of the N₂ atmosphere at lower temperatures, but when the temperature was higher than 1,233 K, the gasification reaction obviously happened. The results of kinetic investigation showed that the multi-stage first-order integral method agreed well with the above experiments.     

The electrochemical Peltier heats of Fe(CN) 6 3− /Fe(CN) 6 4− system at 295.15 K

A specially designed thermo-electrochemical calorimeter was applied to measure the electrochemical Peltier heats (EPH) of Fe(CN) ₆ ^3?/4? system at 295.15 K. The curves of the electrode potential changes and temperature changes against time for Fe(CN) ₆ ^3?/4? couple with five groups of different concentrations were obtained under the condition of various constant-current polarizations. The EPH values for the considered electrode reaction are determined to be ?41.31, ?42.73, ?44.28, ?45.87, and ?46.65 kJ mol^?1 at the respective concentrations of 0.125, 0.175, 0.225, 0.275, and 0.300 mol dm^?3; and the EPH and the apparent enthalpy change corresponding to the infinite dilution to be ?37.42 and ?84.10 kJ mol^?1 at 295.15 K, respectively.     

The influence of silicone shell on double-layered microcapsules in intumescent flame-retardant natural rubber composites

The mechanisms of the thermal degradation of polyhedral oligomeric octaphenylsilsesquioxane (OPS), octa(nitrophenyl)silsesquioxane (ONPS), and octa(aminophenyl)silsesquioxane (OAPS) were investigated. The –NO₂ or –NH₂ substituents on the phenyl group affected the mechanism of the POSS thermal degradation. The thermal stabilities of OPS, ONPS, and OAPS were characterized by TG and FTIR. Thermal degradation of OPS included mainly the degradation of caged polyhedral oligomeric silsesquioxane structures and phenyl groups. Nitro or amino substituents decreased its thermal stability. The thermal degradation processes of OPS, ONPS, and OAPS differed. Phenyl groups and cyclobutadiene were observed in the OPS degradation products. Oxygen radicals that caused intensive CO₂ release between 350 and 450 °C were generated by the degradation of ONPS –NO₂. OAPS released mainly aminophenyl groups at 370 °C, whereas a small number of phenyl groups decomposed at 500 °C. The OAPS reactivity could enhance the thermal stability of POSS structure in the polyimide OAPS composites.     

Improvement of electrochemical performance for Li-rich spherical Li1.3[Ni0.35Mn0.65]O2+x modified by Al2O3

The Li-rich Li_1.3[Ni_0.35Mn_0.65]O_2+x microspheres are firstly prepared and subsequently transferred into the Al₂O₃-coated Li-rich Li_1.3[Ni_0.35Mn_0.65]O_2+x microspheres by a simple deposition method. The as-prepared samples are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and charge/discharge tests. The results reveal that the Al₂O₃-coated Li-rich Li_1.3[Ni_0.35Mn_0.65]O_2+x sample has a typical α-NaFeO₂ layered structure with the existence of Li₂MnO₃-type integrated component, and the Al₂O₃ layer is uniformly coated on the surface of the spherical Li-rich Li_1.3[Ni_0.35Mn_0.65]O_2+x particles with a thickness of about 4 nm. Importantly, the Al₂O₃-coated Li-rich sample exhibits obviously improved electrochemical performance compared with the pristine one, especially the 2 wt.% Al₂O₃-coated sample shows the best electrochemical properties, which delivers an initial discharge capacity of 228 mAh g^?1 at a rate of 0.1 C in the voltage of 2.0–4.6 V, and the first coulombic efficiency is up to 90 %. Furthermore, the 2 wt.% Al₂O₃-coated sample represents excellent cycling stability with capacity retention of 90.9 % at 0.33 C after 100 cycles, much higher than that of the pristine one (62.2 %). Particularly, herein, the typical inferior rate capability of Li-rich layered cathode is apparently improved, and the 2 wt.% Al₂O₃-coated sample also shows a high rate capability, which can deliver a capacity of 101 mAh g^?1 even at 10 C. Besides, the thin Al₂O₃ layer can reduce the charge transfer resistance and stabilize the surface structure of active material during cycling, which is responsible for the improvement of electrochemical performance of the Li-rich Li_1.3[Ni_0.35Mn_0.65]O_2+x .