Controlled/living polymerization of 2‐(diethylamino)ethyl methacrylate and its block copolymer with tert‐butyl methacrylate by atom transfer radical polymerization

Polymerization of 2‐(diethylamino)ethyl methacrylate (DEAEMA) via homogeneous atom transfer radical polymerization under various reaction conditions is described. The effects of the initiators and solvents were examined. With 1,1,4,7,10,10‐hexamethyl triethylenetetramine/copper(I) chloride/p‐toluenesulfonyl chloride as the ligand/catalyst/initiator system in methanol, poly(DEAEMA) with a polydispersity index as low as 1.07 was synthesized. Kinetic studies demonstrated the polymerization was very well controlled and exhibited the living characteristic of the process. Well‐defined block copolymers of DEAEMA and tert‐butyl methacrylate (tBMA) were successfully synthesized. The copolymers could be synthesized with equally good results by starting with either p(DEAEMA) or p(tBMA) as the macroinitiators. However, only the macroinitiators terminated with chlorine should be used. The corresponding macroinitiators with bromine as a transferable group did not yield well‐defined copolymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2688–2695, 2003     

Design and analysis of a plug-in robust compensator: an application to indirect-field-oriented-control induction machine drives

It is well known that the system performance for an indirect-field-oriented-control induction motor drive degrades under the variation of rotor resistance and in the presence of external load torque. In this paper, a plug-in robust compensator for speed and position control enhancement of an indirect-field-oriented-control induction machine drive is developed. In the case where a controller for the induction machine already exists or is in operation with satisfactory nominal tracking performance, this plug-in compensator, designed using the H/sub /spl infin// loop-shaping techniques, can be plugged into the existing controller without affecting the already satisfactory nominal tracking performance of the existing closed-loop system but with the capability to improve the system performance under plant parameter variations and in the presence of external disturbances. Simulation and experimental results are given to validate the proposed plug-in robust compensator.     

微波辐射电镜生物样品制备方法研究

本文报道一种快速微波辐射电镜样品制备方法──水浴法，以及这个方法在动植物样品超薄切片制备中的应用。实验结果表明，水浴法使得样品可以接受相对较长时间的微波辐射而不致造成任何损伤，浸泡液和样品的温度控制简单而且准确，样品处理的结果内外均匀一致，超微结构保存优秀，完全可与常规制样法和Ｌｏｇｉｎ法的结果相媲美，而且在某些方面水浴法要优于常规法和Ｌｏｇｉｎ法。     

Bioavailability Enhancement of Cepharanthine via Pulmonary Administration in Rats and Its Therapeutic Potential for Pulmonary Fibrosis Associated with COVID-19 Infection

Cepharanthine (CEP) has excellent anti-SARS-CoV-2 properties, indicating its favorable potential for COVID-19 treatment. However, its application is challenged by its poor dissolubility and oral bioavailability. The present study aimed to improve the bioavailability of CEP by optimizing its solubility and through a pulmonary delivery method, which improved its bioavailability by five times when compared to that through the oral delivery method (68.07% vs. 13.15%). An ultra-performance liquid chromatography tandem-mass spectrometry (UPLC-MS/MS) method for quantification of CEP in rat plasma was developed and validated to support the bioavailability and pharmacokinetic studies. In addition, pulmonary fibrosis was recognized as a sequela of COVID-19 infection, warranting further evaluation of the therapeutic potential of CEP on a rat lung fibrosis model. The antifibrotic effect was assessed by analysis of lung index and histopathological examination, detection of transforming growth factor (TGF)-β1, interleukin-6 (IL-6), α-smooth muscle actin (α-SMA), and hydroxyproline level in serum or lung tissues. Our data demonstrated that CEP could significantly alleviate bleomycin (BLM)-induced collagen accumulation and inflammation, thereby exerting protective effects against pulmonary fibrosis. Our results provide evidence supporting the hypothesis that pulmonary delivery CEP may be a promising therapy for pulmonary fibrosis associated with COVID-19 infection.     

Robustly topological mixing of Kan's map

In 1994, I. Kan constructed a smooth map on the annulus admitting two physical measures, whose basins are intermingled. In this paper, we prove that Kan's map is $C^2$ robustly topologically mixing.     

Design of Sensitive Biocompatible Quantum‐Dots Embedded in Mesoporous Silica Microspheres for the Quantitative Immunoassay of Human Immunodeficiency Virus‐1 Antibodies

A novel sandwich‐type electrochemiluminescence (ECL) immunosensor was developed to enable the sensitive detection of HIV‐1 antibodies. This system incorporated mesoporous silica (mSiO₂) complexed with quantum dots (QDs) and nano‐gold particles, which were assembled to enhance signal detection. Magnetic beads were used by immobilizing the secondary anti‐IgG antibody. This was first employed to capture HIV‐1 antibody (Ab) to form a Fe₃O₄/anti‐IgG/Ab complex. A high loading and signal‐enhanced nanocomposite (hereafter referred to as Au‐mSiO₂‐CdTe) was used as a HIV‐1 antigen label. The Au‐mSiO₂‐CdTe nanocomposite was conjugated with the Fe₃O₄/anti‐IgG/Ab complex to form an immunocomplex (hereafter referred to as Fe₃O₄/anti‐IgG/Ab/HIV‐1/CdTe‐mSiO₂‐Au). This complex could be further separated by an external magnetic field to produce ECL signals. Due to the large specific surface area and pore volume of mSiO₂, the loading of the CdTe QDs was markedly increased. Thus, the loaded QDs released a powerful chemiluminescent signal with a concordantly increased sensitivity of the immunosensor. The immunosensor was highly sensitive, and displayed a linear range of responses for HIV‐1 antibody across a dilution range of 1 : 1500 through 1 : 50 with the detection limit of 1 : 4500. The immunoassay can be a promising candidate in early diagnosis of HIV infection.     

ZIF-67 derived carbon wrapped discontinuous CoxP nanotube as anode material in high-performance Li-ion battery

Transition metal phosphides (TMPs) are prospective anode materials for lithium-ion batteries (LIBs) due to their high theoretical capacities and low redox voltages. Herein, we report a template directing method to develop a tube-sheath hybrid composing of cobalt phosphide particles encapsulated in metal organic frameworks (MOFs) derived N-doped carbon sheaths (Co_xP@NC). The utilization of directing template leads to a homogenous distribution of the subsequently formed cobalt phosphide particles, restrains the aggregation of cobalt phosphides, and thus results in the superb rate capability and cyclability. Contributable to the integrated merits of the interior downsized cobalt phosphide particles and the outer ZIF-67 derived porous carbon sheath, the volume expansion during cycling is effectively suppressed. The Co_xP@NC hybrid shows superb electrochemical performance as anode material for LIB, with good reversible capacity of 928 mAh·g^?1 after 100 cycles at 0.1 A g^?1, and high stability of 526 mAh·g^?1 after 600 cycles at 1.0 A g^?1. This work provides a route for rational design of MOF derived carbon-based anode material for LIB, which could also be applied as a promising platform in diverse field.     

Self-Compacting Alkali-Activated Materials: Progress and Perspectives

Alkali-activated materials (AAMs) are considered to be alternative cementitious materials for civil infrastructures. Nowadays, efforts have been made in developing AAMs with self-compacting ability. The obtained self-compacting AAMs (SCAAMs) accomplish superior passing and filling properties as well as excellent mechanical and environmental advantages. This work critically revisits recent progresses in SCAAMs including mixture proportions, fresh properties, mechanical strength, microstructure, acid and sulfate resistance, high temperature behaviors, impact resistance and interface shear strength. To facilitate direct comparison and interpretation of data from different publications, mixture proportions were normalized in terms of the content of key reactive components from precursors and activators, and correlation with mechanical behaviors was made. Moreover, special attention was paid to current research challenges and perspectives to promote further investigation and field application of SCAAMs as advanced construction material.     

基于P89LPC922的Mifare卡预付费智能水表的设计与实现

介绍了一种低功耗智能水表的设计方案。该水表以Philips公司的低功耗单片机P89LPC922为控制芯片,配有电源电路、阀门驱动电路、计量电路、Mifare卡的读写电路、液晶显示等部分。根据该方案设计的水表已投入市场。     

偶氮四唑叠氮基甲脒AFZT高压物性的第一性原理计算

偶氮四唑叠氮基甲脒AFZT的爆轰性能表现优异,在高能炸药领域中具有广阔的应用前景.本文采用基于密度泛函理论的第一性原理方法计算了AFZT在0～50 GPa压力下的晶体结构、电子性质以及氢键相互作用,并分析了这些性质在压力下的变化规律.在压力的作用下,AFZT晶体在5 GPa下发生了结构转变并伴随着电子结构中带隙值的突变,其带隙先减小后增大再减小,总态密度的峰值随着压力的增加而减小.结构中叠氮甲脒阳离子上的N8-N9与N9-N10键在压力下表现得最稳定,N-H^…N类型的氢键在所有相互作用中占据主导地位.此外,AFZT结构沿不同晶轴压缩的难易程度与此方向上氢键相互作用分布的疏密有关,并且其氢键主要沿xz平面分布而在y轴上分布极少,这导致了它沿y轴方向最易被压缩.