基于ANSYS的CPU散热器不同角度鳍片散热分析

由于计算机的体积不断缩小,CPU散热器的散热效果对CPU工作性能的影响越加明显,在智能计算机的有限空间散热问题值得深入讨论和研究.本文利用ANSYS软件建立了CPU散热器的三维有限元模型,对其进行热学性能分析.通过改变散热器鳍片角度得到了散热器的温度分布云图和热梯度分布云图,然后对离散数据进行线性拟合,分析了不同角度的散热器鳍片分别与最大温降、热流量、最大长度值之间的函数关系.研究表明,不同角度的鳍片对散热器的散热效果产生一定的影响,为散热器的优化设计提供了重要依据.     

Modular synthesis of candidate indole-based insulin mimics by Claisen rearrangement

A modular synthetic route to (indolyl)kojic acid anti-diabetes agents has been developed. Sonogashira coupling of a protected iodoaniline with a propargyl kojate was used to construct an (indole)methyl kojate. Its heteroaromatic Claisen rearrangement, followed by tautomerization to return the indole and pyrone rings, was used to create the biaryl C-C bond. This route should enable collections of insulin mimic drug candidates to be prepared from a few basic building blocks.     

Distribution of Selmer groups of quadratic twists of a family of elliptic curves

We study the distribution of the size of the Selmer groups arising from a 2-isogeny and its dual 2-isogeny for quadratic twists of elliptic curves with full 2-torsion points in Q. We show that one of these Selmer groups is almost always bounded, while the 2-rank of the other follows a Gaussian distribution. This provides us with a small Tate-Shafarevich group and a large Tate-Shafarevich group. When combined with a result obtained by Yu [G. Yu, On the quadratic twists of a family of elliptic curves, Mathematika 52 (1-2) (2005) 139-154 (2006)], this shows that the mean value of the 2-rank of the large Tate-Shafarevich group for square-free positive integers n less than X is , as X→∞.     

Single-molecule detection of DNA via sequence-specific links between F1-ATPase motors and gold nanorod sensors

We report the construction of a novel biosensing nanodevice to detect single, sequence-specific target DNA molecules. Nanodevice assembly occurs through the association of an immobilized F1-ATPase molecular motor and a functionalized gold nanorod via a single 3',5'-dibiotinylated DNA molecule. Target-dependent 3',5'-dibiotinylated DNA bridges form by combining ligation and exonucleation reactions (LXR), with a specificity capable of selecting against a single nucleotide polymorphism (SNP). Using dark field microscopy to detect gold nanorods, quantitation of assembled nanodevices is sufficient to distinguish the presence of as few as 1800 DNA bridges from nonspecifically bound nanorods. The rotary mechanism of F1-ATPase can drive gold nanorod rotation when the nanorod is attached via the DNA bridge. Therefore, rotation discriminates fully assembled devices from nonspecifically bound nanorods, resulting in a sensitivity limit of one zeptomole (600 molecules).     

Cobalt-catalyzed hydrogen desorption from the LiNH2-LiBH4 system

A doping of 5 wt% CoCl2 considerably decreases the dehydrogenation temperature of a mixture of LiNH2 and LiBH4. More that 8 wt% of hydrogen can be released at ca. 155 degrees C. X-Ray absorption near edge structure (XANES) spectroscopy indicated the formation of metallic Co after ball milling CoCl2 with LiNH2 and LiBH4. Extended X-ray absorption fine structure (EXAFS) spectroscopy measurements revealed that Co particles have poor crystallinity and are finely dispersed in the sample, which could lead to a high catalytic efficiency.     

Dielectric anisotropy of a homochiral rare-earth metal complex

A homochiral rare-earth metal Tb complex that exhibited a very large dielectric anisotropic property with a temperature-independent feature is obtained. Our findings on high-dielectric anisotropy will provide a new impetus in this field of materials science.     

On-line separation and preconcentration of inorganic arsenic and selenium species in natural water samples with CTAB-modified alkyl silica microcolumn and determination by inductively coupled plasma-optical emission spectrometry

A new, simple, and selective method has been presented for the separation and preconcentration of inorganic arsenic (As(III)/As(V)) and selenium (Se(IV)/Se(VI)) species by a microcolumn on-line coupled with inductively coupled plasma-optical emission spectrometry (ICP-OES). Trace amounts of As(V) and Se(VI) species were separated and preconcentrated from total As and Se at desired pH values by a conical microcolumn packed with cetyltrimethylammonium bromide (CTAB)-modified alkyl silica sorbent in the absence of chelating reagent. The species adsorbed by CTAB-modified alkyl silica sorbent were quantitatively desorbed with 0.10 ml of 1.0 mol l⁻¹ HNO₃. Total inorganic arsenic and selenium were similarly extracted after oxidation of As(III) and Se(IV) to As(V) and Se(VI) with KMnO₄ (50.0 μmol l⁻¹). The assay of As(III) and Se(IV) were based on subtracting As(V) and Se(VI) from total As and total Se, respectively. All parameters affecting the separation/preconcentration of As(V) and Se(VI) including pH, sample flow rate and volume, eluent solution and volume have been studied. With a sample volume of 3.0 ml, the sample throughput was 24 h⁻¹ and the enrichment factors for As(V) and Se(VI) were 26.7 and 27.6, respectively. The limits of detection (LODs) were 0.15 μg l⁻¹ for As(V) and 0.10 μg l⁻¹ for Se(VI). The relative standard deviations (RSDs) for nine replicate determinations at 5.0 μg l⁻¹ level of As(V) and Se(VI) were 4.0% and 3.6%, respectively. The calibration graphs of the method for As(V) and Se(VI) were linear in the range of 0.5–1000.0 μg l⁻¹ with a correlation coefficient of 0.9936 and 0.9992, respectively. The developed method was successfully applied to the speciation analysis of inorganic arsenic and selenium in natural water samples with satisfactory results.     

Addition reactions of fluoroalkanesulfonyl azides to [60] fullerene under thermal or microwave irradiation condition

The reactions of [60] fullerene with excess fluoroalkanesulfonyl azides R_fSO₂N₃ in o-dichlorobenzene under thermal or microwave irradiation condition afforded monoadduct opened [5,6]-bridged azafulleroids. While, similarly treatment of 2,2,2-trifluoroethyl azides CF₃CH₂N₃ with C₆₀ gave two monoadducts, i.e., opened [5,6]-bridged azafulleroids, closed [6,6]-bridged Aziridino-fullerene, and some multi-addition product. A general mechanism for these addition reactions was proposed.     

Vilmoraconitine, a novel skeleton C19-diterpenoid alkaloid from Aconitum vilmorinianum

A novel C₁₉-diterpenoid alkaloid vilmoraconitine (1) was isolated from the roots of Aconitun vilmorinianum. Its structure was mainly determined by MS, 2D NMR, and X-ray methods. This is the first aconitine-type C₁₉-diterpenoid alkaloid with one three-membered ring at C-8, C-9, and C-10.