Sulfonated carbon catalyzed oxidation of aldehydes to carboxylic acids by hydrogen peroxide

Sulfonated carbon as a strong and stable solid acid catalyst exhibited excellent catalytic performance in various acid-catalyzed reactions. Here, sulfonated carbon, as catalyst for oxidation reaction, was prepared via the carbonization of starch followed by sulfonation with concentrated sulfuric acid. N₂ physisorption, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray fluorescence and acid-base titration were used to characterize the obtained materials. The catalytic activity of sulfonated carbon was studied in the oxidation of aldehydes to carboxylic acids using 30 wt% H₂O₂ as oxidant. This oxidation protocol works well for various aldehydes including aromatic and aliphatic aldehydes. The sulfonated carbon can be recycled for three times without obvious loss of activity.     

Direct conversion of fructose-based carbohydrates to 5-ethoxymethylfurfural catalyzed by AlCl3·6H2O/BF3·(Et)2O in ethanol

Direct conversion of fructose-based carbohydrates to 5-ethoxymethylfurfural (EMF) catalyzed by Lewis acid in ethanol was investigated. It was found that BF₃·(Et)₂O was favorable for 5-hydroxymethylfurfural (HMF) etherification to EMF. BF₃·(Et)₂O combination with AlCl₃·6H₂O with the molar ratio of 1 was an effective catalyst system for synthesis of EMF from fructose-based carbohydrates. 55.0%, 45.4% and 23.9% of EMF yields were obtained from fructose, inulin and sucrose under optimized conditions, respectively.     

Amperometric detection of nitrite based on Dawson-type vanodotungstophosphate and carbon nanotubes

A nitrite sensor based on Dawson vanodotungstophosphates α₂-K₇P₂VW₁₇O₆₂·18H₂O (P₂W₁₇V) and carbon nanotubes (CNTs) was prepared by electrostatic layer-by-layer self-assembly technique. The sensor {PEI/PSS/[PDDA/P₂W₁₇V-CNTs]_n} was characterized by UV–vis spectroscopy, atomic force microscopy (AFM), scanning electron microscopy (SEM) and X-ray photoelectron spectra (XPS). The electron transfer and sensing ability of this sensor were explored using cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) technology. The results show that the incorporation of CNTs and P₂W₁₇V into the composite film endowed the modified electrode with fast transfer rate and high electrocatalytic activity towards oxidation of nitrite. This nitrite sensor with 10 bilayers has a broad linear range of 5 × 10⁻⁸ to 2.13 × 10⁻³ M, a low detection limit of 0.0367 μM (S N⁻¹ = 3), a high sensitivity of 0.35 mA mM⁻¹ NO₂⁻, an excellent anti-interference property in the presence of other potential interfering species and a good stable. It was successfully employed for determination of nitrite in real towards.     

High sensitivity chemiluminescence enzyme immunoassay for detecting staphylococcal enterotoxin A in multi-matrices

In this study, detection of staphylococcal enterotoxin A (SEA) in multi-matrices using a highly sensitive and specific microplate chemiluminescence enzyme immunoassay (CLEIA) has been established. A pair of monoclonal antibodies (mAbs) was selected from 37 anti-SEA mAbs by pairwise analysis, and the experimental conditions of the CLEIA were optimized. This CLEIA exhibited high performance with a wide dynamic range from 6.4 pg mL⁻¹ to 1600 pg mL⁻¹, and the measured low limit of detection (LOD) was 3.2 pg mL⁻¹. No cross-reactivity was observed when this method was applied to test SEB, SEC1, and SED. It has also been successfully applied for analyzing SEA in a variety of environmental, biological, and clinical matrices, such as sewage, tap water, river water, roast beef, peanut butter, cured ham, 10% nonfat dry milk, milk, orange juice, human urine, and serum. Thus, the highly sensitive and SEA-specific CLEIA should make it attractive for quantifying SEA in public health and diagnosis in near future.     

Electrochemical immunosensor based on nanoporpus gold loading thionine for carcinoembryonic antigen

Nanoporous gold (NPG) has recently received considerable attention in analytical electrochemistry because of its good conductivity and large specific surface area. A facile layer-by-layer assembly technique fabricated NPG was used to construct an electrochemical immunosensor for carcinoembryonic antigen (CEA). NPG was fabricated on glassy carbon (GC) electrode by alternatively assembling gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs) using 1,4-benzenedimethanethiol as a cross-linker, and then AgNPs were dissolved with HNO₃. The thionine was absorbed into the NPG and then gold nanostructure was electrodeposited on the surface through the electrochemical reduction of gold chloride tetrahydrate (HAuCl₄). The anti-CEA was directly adsorbed on gold nanostructure fixed on the GC electrode. The linear range of the immunosensor was from 10 pg mL⁻¹ to 100 ng mL⁻¹ with a detection limit of 3 pg mL⁻¹ (S/N = 3). The proposed immunosensor has high sensitivity, wide linear range, low detection limit, and good selectivity. The present method could be widely applied to construct other immunosensors.     

Controlling the optimum surfactants concentrations for dispersing carbon nanofibers in aqueous solution

As a new nano-scale functional material, it is necessary to achieve a uniform distribution in the composites for gaining the CNFs’ excellent reinforcing effect. In this paper, CNFs were purified by the method of high temperature annealing treatment. Six surfactants, methylcellulose (MC), hydroxypropyl methylcellulose (HPMC), sodium dodecyl sulfate (SDS), dodecylamine (DDA), N, N-dimethyl formamide (DMF) and cetyltrimethyl ammonium bromide (CTAB) were used individually and combinatorially in a certain concentration to disperse the CNFs in aqueous solution. To achieve a good dispersion of the CNFs, a method utilizing ultrasonic processing was employed. The CNFs treated by the method of high temperature annealing treatment were characterized by differential thermal analysis (DTA) and thermogravimetry analysis (TGA), and the ultrasonication-driven dispersion of CNFs in aqueous solutions were monitored by UVvis spectroscopy and transmission electron microscopy (TEM). The experiments reveal that the method of high temperature annealing treatment purified the CNFs and the maximum achievable dispersion of CNFs corresponds to the maximum UV absorbance of the solution. All results show that the surfactants mixture of MC and SDS in a certain concentration of 0.4 and 2.0 g/L has the maximum dispersion effect on CNFs in aqueous solution, the optimum concentration ratio of MC, SDS, and CNFs was 2: 10: 1.     

Cu(OTf)2-Catalyzed 1,2,3-triazole-ring-controlled selective phenolic O–H bond methylthiomethylation

Copper-catalyzed selective methylthiomethylation of 1,4-disubstituted 1,2,3-triazole phenols using DMSO as a methylthiomethylation reagent was achieved. Controlled by the triazole ring, the ortho-phenolic hydroxyl in N(1) aryl can be selectively methylthiomethylated, generating functionalized 1,4-disubstituted 1,2,3-triazoles bearing aryl methylthiomethyl ether fragment.     

L ‐Proline‐Promoted CuI‐Catalyzed C‐S Bond Formation between Aryl Iodides and Thiols

An improved, mild procedure for the CuI‐catalyzed coupling reactions of aryl iodides with aliphatic and aromatic thiols, using L ‐proline as the ligand, is reported. This procedure is noteworthy given its high generality and exceptional level of functional group toleration.     

Direct Pyridazine Ring Synthesis from β-Cyano Esters. A Facile Synthesis of the Derivatives of Tetrahydro-3,6-pyridazinedione 3-Hydrazone

4-Substituted tetrahydro-3,6-pyridazinedione 3-hydrazones (2) (or their 3-hydrazino tautomers 3), useful intermediates in the synthesis of bicyclic pyridazine derivatives, were prepared in satisfactory yields in the reaction of the corresponding alkyl 3-substituted 3-cyanopropionates with hydrazine hydrate.