Design, modeling, and hardware correlation of a 3.2Gb/s/pair memory channel

With the rapid advance of silicon process technology, it is now possible to design input/output (I/O) circuits that operate at multigigabit data rates. As a result, accurate modeling and analysis of high-speed interconnect systems is essential to optimize the performance of the overall system. This paper describes the interconnect design, modeling, simulation, and characterization methodologies that are essential to achieve multigigabit data rates. It focuses on the physical layer verification and hardware correlation of functional systems and silicon to ensure robust system operation over 3.2Gb/s data rate using conventional low-cost packaging and printed circuit board (PCB) technologies. In order to capture conductor and dielectric losses, as well as other high-frequency effects of three-dimensional structures, accurate measurement-based simulation techniques that directly incorporate frequency-domain parameters from measurement or electromagnetic solver parameters into circuit simulation tools using fast Fourier transform (FFT) and bandlimiting windowing techniques are developed. Finally, simulation waveforms are correlated with prototypes at both component and system levels in both time and frequency domains.     

基于宽带毫米波工作体制的雷达目标识别方法探讨

对基于宽带毫米波工作体制的雷达目标特征获取和识别方法进行了综合分析和探讨.表明:在毫米波照射下,雷达目标可模型化为由多个散射中心组成的扩展目标;只要发射信号有足够的带宽,就可以从回波信号中获得各散射中心的空间分布、类型等特征;仿真结果说明,这种方法对高频区复杂目标的识别是有效的.     

Impedance boundary conditions in a hybrid FEM/MOM formulation

When numerically modeling structures with imperfect conductors or conductors coated with a dielectric material, impedance boundary conditions (IBCs) can substantially reduce the amount of computation required. This paper incorporates the IBC in the finite-element method (FEM) part of a FEM/method of moments (FEM/MoM) modeling code. Properties of the new formulation are investigated and the formulation is used to model three practical electromagnetic problems. Results are compared to either measured data or other numerical results. The effect of the IBC on the condition number of hybrid FEM/MoM matrices is also discussed.     

移动运营商渠道管理模式及存在问题分析

渠道作为营销体系中的重要一环，对移动运营商的发展起着举足轻重的作用。随着国内移动市场竞争的加剧，营销渠道的竞争将成为移动运营商间竞争的焦点。目前，国内两大移动运营商在渠道管理上存在诸多问题，从而影响了其市场拓展。分析了移动选营商渠道管理存在的三个较为突出的问题，并提出了可行的解决方法，从而为移动运营商的渠道管理工作提供思路。     

基于cDNA宏阵列的系统聚类分析猪发育阶段的基因表达谱

取杜洛克猪胚胎第33,45,55，65．75天的背最长肌样本．用cDNA Macroarray分析方法和聚类分析技术分析了327个EST在骨骼肌内不同发育阶段的基因表达谱．结果表明有98条EST在不同发育时期显著差异表达．第33天和第45天两阶段基因表达状态相似．第55天和第65天基因表达状态相似．而第75天的基因表达与第55天和第65天两个阶段的基因表达具有相近的聚类关系．表达状态相近，基因功能相似的基因大都被聚类在一起．     

光电光谱法分析钢中钙

本文研究了用光电光谱法测定钢中钙的方法 ,确定了最佳分析条件 ,分析了共存元素的干扰情况。用本方法测定钢中钙 ,具有良好的准确度和精密度 ,结果令人满意。     

饮食中微量元素砷的分布规律与人体健康关系

采用催化动力学光度法测定了六大类(共三十种)样品中的总砷含量，探讨了砷在食品中的分布规律，建立了砷在人体中的安全系效和积累系效的效学评价公式，用于评价砷与人体健康的关系，这对人们选择食物有一定的指导意义。     

台达变频器在纺织织带盘带机上的应用

盘带机是纺织织带成品分卷设备，需要使用到收放卷控制。本文基于台达变频器在盘带机上的应用案例，论述盘带机自动化系统设计调试过程以及遇到的问题分析。     

Temperature dependence of aluminum nitride reflectance spectra in vacuum ultraviolet region

Temperature dependence of optical reflectance spectra in vacuum ultraviolet region for aluminum nitride has been measured on high-quality single crystal with synchrotron radiation. The dominant structure due to the interband transition is observed at photon energy around 7.7 eV. With decreasing temperature, the energy position of the dominant structure in the reflectance spectra shifts towards higher energy. The experimental data has been fitted to the Bose-Einstein expression and the obtained parameter related to the strength of the electron-phonon interactions is much smaller than that for the peak at 6.2 eV, suggesting that the higher-lying interband transition energy decreases more slowly with increasing temperature in aluminum nitride (AlN).