〈I〉型三角剖分下非张量积连续小波基的构造

多维非张量积小波是近年小波研究领域中的热点问题之一 ,它们与多维张量积小波相比具有更多的优势 .关于高维张量积、非张量积小波 ,目前已有一些很好的工作 (见文[2 ] [3 ] [4 ] ) ,但关于样条小波 ,还有许多问题有待于研究 .本文针对〈I〉型三角剖分下的二维线性元空间 ,讨论其具有紧支集和对称性的半正交样条小波基 .给定 x1 x2 平面上的〈I〉型三角剖分 (图 1 ( a)所示 ) ,记 j=( j1 ,j2 ) ,| j| =j1 + j2 ,πm= { 0≤ |j|≤ mCj1j2 xj11 xj22 ,Cj1,j2 是任意实数 }为次数不超过 m的代数多项式全体 .引入剖分尺度为 1的线性元空间 V0…     

非完整系统Chetaev动力学和vakonomic动力学的等价条件

就一般非完整约束系统，从约束方程满足的变分恒等式出发，利用增广位形流形上的向量场定义三类非自由变分，即非完整变分：vakonomic变分、Hlder变分、Suslov变分，并讨论它们之间的关系以及它们成为自由变分的充要条件.利用非完整变分以及相应的积分变分原理建立两类动力学方程：vakonomic方程和Routh方程或Chaplygin方程.通过vakonomic方程分别与Routh方程和Chaplygin方程比较，得到它们具有共同解的两类充分必要条件.这些条件并不是约束的可积性条件. 关键词： 非完整约束 非完整变分 Chetaev条件 vakonomic动力学     

FTIR光谱遥测红外药剂的燃烧温度

本文利用遥感FTIR光谱，对红外药剂的燃烧特性进行了研究。在分辨率为4cm^-1时，收集4700－740cm^-1波段的光谱。从HF等燃烧产物发射的分子振转基带精细结构的谱线强度分布，可以对燃烧温度进行遥感测定，并给出了燃烧温度随时间的变化关系，实验结果表明燃烧表面附近温度梯度很大，存在着急剧的变化温度场，同时也说明，在不干扰火焰温度场的情况下，利用遥感FTIR光谱对剧烈的、非稳态快速燃烧的火焰温度进行连续实时的遥感测量，是一种快速、准确、灵敏度高的测温方法，显示了它在燃烧温度测量、产物浓度测试以及燃烧机理研究等方面的应用前景。     

两种拔尿管方法对膀胱功能损伤的临床观察

为观察两种不同的拔尿管方法对膀胱功能损伤的差异,将80例患者随机分成两组,分别采用改良法(40例)和常规法(40例)拔除留置尿管,分析比较了两组患者排尿顺利率、逼尿肌功能恢复率及尿道刺激症、尿失禁、尿潴留。结果表明,两组患者拔管后上述指标与情况有显著性差异,P<0.05。提示改良组膀胱功能损伤明显低于对照组。改良的拔管方法是一种值得护理推广应用的好方法。     

金属β-二酮化合物用于MOCVD法生长铁电氧化物薄膜

对用于MOCVD法生长铁电氧化物薄膜的金属β－二酮化合物的制备、结构及性质进行了评述，对它们在生长铁电薄膜中的应用现状进行了介绍，并对它们的应用前景作了展望。     

A FUNDAMENTAL SOLUTION FOR THE LAPLACE OPERATOR ON THE QUATERNIONIC HEISENBERG GROUP

In this paper, the author studies the Laplace operator on the quaternionic Heisenberg group, construct a fundamental solution for it and use this solution to prove the Lp-boundedness and the weak (1-1) boundedness of certain singular convolution operators on the quaternionic Heisenberg group.     

β-Si3N4电子结构和光学性质的第一性原理研究

采用基于密度泛函的平面波赝势方法(PWP)和广义梯度近似(GGA),计算了β相氮化硅(β-Si3N4)的电子结构和光学性质,得到的晶格常数、能带结构等均与实验结果较好符合.进一步还研究了β-Si3N4的光吸收系数以及禁带宽度随外压力的变化规律,为β-Si3N4材料在高压条件下的应用提供了理论参考.     

PVK∶DBVP掺杂体系的能量转移及发光性质的研究

研究了不同比例的PVK与齐聚PPV衍生物DBVP掺杂体系的能量转移和发光特性.通过对PVK,DBVP及PVK:DBVP掺杂体系的UV-vis,PL和PLE光谱的研究,分析了PVK与DBVP之间的能量转移过程.利用PVK在体系中类似于溶剂的分散作用,制备了结构为ITO/PEDOT/PVK:DBVP/LiF/Al的电致发光器件,研究了掺杂体系的电致发光性能.结果表明,在掺杂体系的光致发光和电致发光中,PVK的发射被有效地抑制,PVK与DBVP之间发生了非常有效的能量转移,通过调节PVK与DBVP的比例,可以获得蓝色和绿色发光,同时可以改善器件的发光性能,当PVK与DBVP的重量比为1∶2时,器件的绿色发光效率达到1·06cd/A,此时发光亮度为52cd/m2.     

Efficient computation of natural convection in a concentric annulus between an outer square cylinder and an inner circular cylinder

In this work, the natural convection in a concentric annulus between a cold outer square cylinder and a heated inner circular cylinder is simulated using the differential quadrature (DQ) method. The vorticity‐stream function formulation is used as the governing equation, and the coordinate transformation technique is introduced in the DQ computation. It is shown in this paper that the outer square boundary can be approximated by a super elliptic function. As a result, the coordinate transformation from the physical domain to the computational domain is set up by an analytical expression, and all the geometrical parameters can be computed exactly. Numerical results for Rayleigh numbers range from 104 to 106 and aspect ratios between 1.67 and 5.0 are presented, which are in a good agreement with available data in the literature. It is found that both the aspect ratio and the Rayleigh number are critical to the patterns of flow and thermal fields. The present study suggests that a critical aspect ratio may exist at high Rayleigh number to distinguish the flow and thermal patterns. Copyright © 2002 John Wiley & Sons, Ltd.     

An applied cell mapping method for optimal control problems

From the application point of view, a series of modifications are proposed for the cell mapping method discussed in Ref. 1 for the optimal control analysis of dynamical systems. The cell order around the target set is rearranged. A set of common discriminate principles is used for the selection of the optimal one among competing control strategies of the same cost. Inequality constraints of the system are taken into account. The number of elements in the set of allowable time intervals is not prescribed, but left open. These modifications seem to make the cell mapping method more efficient for analyzing feedback systems and for obtaining their global optimal control information. The algorithms presented in this paper could broaden the application of the cell mapping approach of Ref. 1 to a wider class of engineering problems.